OMAP-L138: MMC/SD: DMA _SIZE can be greater than FIFO size?
Part Number:OMAP-L138Hello Champs,On the TRM 27.3.3 MMC/SD Mode Single-Block Write Operation Using the EDMA, it is said “8. Set up the DMA (DMA size must be greater than or equal to the FIFOLEV...
View ArticleLINUXSDK-OMAPL138: Use of shared RAM in OMAPL138
Part Number:LINUXSDK-OMAPL138Hi,I have one query regarding to on chip Shared RAM in OMAPL138. Which is located at 0x80000000 to 0x8001 FFFF. Is it possible to use it for arrays declared in .cpp file...
View ArticleOMAP-L138: How to disabled JTAG
Part Number:OMAP-L138Anyway to disable JTAG for OMAP-L138 to prevent user connect to processor?
View ArticleOMAP-L138: RAM Replacement for K4T1G164QF
Part Number:OMAP-L138Hi,I am developing a new CPU board with the OMAP-L138 and I am looking for long-term available RAM and Flash components because the components used in the LCDK Development Kit,...
View ArticleCCS/OMAP-L138: UART1 Connection - No Reading on Oscilloscope or Arduino Nano
Part Number:OMAP-L138Tool/software: Code Composer StudioI am trying to interface an arduino nano with the OMAP-L138/C6748 via a connection through the J15 pinout and have a few questions. (Note: this...
View ArticleCCS/OMAP-L138: Interfacing with External Microcontroller (Arduino...
Part Number:OMAP-L138Tool/software: Code Composer StudioI am trying to find a method of interfacing an arduino with a omap-l138, preferably with no hardware modifications, and would like to know what...
View ArticleCCS: TM320C6748
Tool/software: Code Composer StudioI would like to get some basics of TM320C6748 programming using Code Composer Studio.
View ArticleClik here to view.
CCS/TMS320C6748: C6748
Part Number:TMS320C6748Tool/software: Code Composer StudioPlease explain the details of these functions.I am very new to CCS and help me please.
View ArticleRTOS/PROCESSOR-SDK-OMAPL138: Using SRAM to share data between the ARM and DSP...
Part Number:PROCESSOR-SDK-OMAPL138Tool/software: TI-RTOSI'm trying to use the SRAM to share data that would go between a Linux App running on the ARM and an RTOS FW on the DSP.For the ARM side I'm...
View ArticlePROCESSOR-SDK-OMAPL138: Can't access the ISTP register in the boot program
Part Number:PROCESSOR-SDK-OMAPL138Dear TI team,I am developing a device using OMAPL138 processor.I want to access to the ISTP register to set the interrupt vector table pointer.I read and followed the...
View ArticleSPI FLASH W25Q64JV ISSUE
Hi, while reading data after writing data in the first location of a page(256 bytes) the data is correct.But while reading if we write in any location other than starting of a page , some...
View ArticleOMAP-L138: Please clarify the settings between boot loader program and gel...
Part Number:OMAP-L138Dear Team,I am using TI’s TMDSLCDK OMAP-L138 evaluation board. In that I want to load my application (boot.ais and program.bin) in NAND flash so that program will boot from NAND to...
View ArticleOMAP-L138: Connecting a USB Bluetooth dongle to an OMAP-L138 EVM
Part Number:OMAP-L138Without using Linux what is the best way for connecting a USB Bluetooth dongle to a OMAP-L138 EVM and own board in the future. How to get a software driver for communicating with...
View ArticleOMAP-L138: Verify settings to run application from NAND flash: 300 Mhz...
Part Number:OMAP-L138Dear Team,I am working on TI’s TMDSLCDK138 evaluation board.In that I want to run my application at 300 MHz processor speed and 102 MHz DDR2.In debug mode, using OMAP-L138_LCDK.gel...
View ArticleOMAP-L138: Tool to know at what speed processor and DDR2 is running when boot...
Part Number:OMAP-L138Dear TeamIs ther any tool or script which tells us that at what speed our application (processor speed and DDR2 speed) is runnning when boot from NAND flash?Regards,Ashish
View ArticleCCS/TMS320C6748: C6748
Part Number:TMS320C6748Tool/software: Code Composer StudioWhat is the difference between UARTPutc(' ') and UARTPuts(' ') and also help me to identify the use of the highlighted number in the following...
View ArticleClik here to view.
TIDEP-0099: Trouble getting up and running in Windows 10
Part Number:TIDEP-0099The documentation for this starter kit is very difficult to follow. I simply want help to get up and running with the OMAP-L137/TMS320C6747 Floating Point Starter Kit (SK) and...
View ArticleRTOS/OMAP-L138: Sun RPC support for Ti RTOS
Part Number:OMAP-L138Tool/software: TI-RTOSI am looking for support for Sun RPC (Remote Procedural Call) with the Ti RTOS.are there existing libraries for sun RPC on the Ti RTOS ?Is it possible to port...
View ArticleClik here to view.
CCS/OMAP-L138: pls help: support customers example programs without operating...
Part Number:OMAP-L138Tool/software: Code Composer StudioCustomer DTU projects use OMAPL138，The HPI interface is used between the OMAPL138 and MCU。Omapl138's code stored in the MCU's external flash.When...
View ArticleClik here to view.
OMAP-L138: About using "--c64p_dma_l1d_workaround" of compiler option
Part Number:OMAP-L138Hi,I want to know workaround for OMAP-L138 errata(Advisory 2.3.17).Workaround for this errata: It is described to use "--c64p_dma_l1d_workaround" option for method 1. However, this...
View Article