Loading .out file through command line(not CCS).
HelloI am searching for a tool/software that will let me load the program to the RAM. I don't want to do it through Code composer.I need a stand alone tool with commands interface.Best tool is command...
View ArticleOMAP-L138: Power consumption of OMAP-L138
Part Number:OMAP-L138I want to know the power consumption of OMAP-L138 dsp processor, i searched many documents available on ti site but couldn't find outPlease tell me the equation or link of ti site...
View ArticleRTOS/OMAPL138B-EP: Is the OMAPL138 supported in RTOS OMAPL3X SDK?
Part Number:OMAPL138B-EPTool/software:TI-RTOSHello,I have inherited a project that was built using an older SYS/BIOS on the ARM and DSP side of the OMAPL138 processor. My goal is to bring the project...
View ArticleStarterware/TMS320C6748: #48-D incompatible redefinition of EDMA3_MAX_REGIONS
Part Number:TMS320C6748Tool/software: StarterwareHi,I'm using CCS6, Starterware and the EDMA3 LLD which results in the compiler warning, "#48-D incompatible redefinition of EDMA3_MAX_REGIONS..."And...
View ArticleLinux/OMAP-L138: The OMAPL138 processor runs the Linux system to use the...
Part Number:OMAP-L138Tool/software: LinuxHello, we intend to use the OMAPL138 processor to run the embedded Linux system, then use the WL1831 module's Bluetooth function through the processor. But...
View ArticleOMAPL138B-EP: Nor Flash Register Calc
Part Number:OMAPL138B-EPHi all,I use the last year a exel calc file to program correctly Emif register timing because I had tha Nand Flash connect with Emif bus. (NandFlash Register Calc v3.zip)Now I...
View ArticleCCS/OMAP-L138: Building problem with "call_dsplib" example from dsplib_v12
Part Number:OMAP-L138Tool/software: Code Composer StudioHello,I am using MityDSP OMAP-L138F from critical link. I have downloaded "dsplib_v12" from TI website. the following step was successfully...
View ArticleLinux/OMAP-L138: Problem when Loading the EVM GEL file : OMAP-L138 Preparing...
Part Number:OMAP-L138Tool/software: LinuxHi , I have bought OMAP-L138 LCDK for my company and I have some questions:1) Which target configuration file must I use ?2) Can I boot and emulator without...
View ArticleOMAP-L138: EMIF Interface to 16 bit NOR
Part Number:OMAP-L138Heloo,We are using L138 to interface 256Mbit Nor flash in our design.Interface is configured as asynchronous and of 16 bit Data width.We are following the configuration as...
View ArticleLinux/LINUXSDK-OMAPL138: How to implement the Bluetooth + WiFi function based...
Part Number:LINUXSDK-OMAPL138Tool/software: LinuxWe are using the OMAPL138 processor, and run the embedded Linux system on the processor; on this platform, we want to use the Bluetooth + WiFi...
View ArticleLoading .gel file through command line.
HelloIn order to use the Loadti tool, .gel file needs to be loaded first.Without configuration, it can not load the .out file.How can i run the .gel file (making connect to target + initialization)...
View ArticleClik here to view.
AM1808: USB0_DRVVBUSn drive to LOW sometimes
Part Number:AM1808This is a mature product of customer, Recently they sell it to oversea customer, the end customer report sometimes the USB connected scanner doesn't work, field check found the...
View ArticleCompiler/OMAP-L138: Which programmer we use to download the program during...
Part Number:OMAP-L138Tool/software: TI C/C++ CompilerWhich programmer we use to download the program during production
View ArticleOMAP-L138: SPI maximum frequency in master and slave mode
Part Number:OMAP-L138What is the maximum frequency on which SPI can runMaster modeSlave modeAshish
View ArticleOMAP-L138: Can we connect TI ADS131A04 adc with OMAPL138
Part Number:OMAP-L138Can we connect TI ADS131A04 adc with OMAPL138 as adc I/O works on 3.3 v and OMAP core works on 1.0 v to 1.3 volts.I didn't get the information about OMAP I/O works on 3.3 volts
View ArticleOMAP-L138: Which debugger we need for development on TMDXLCDK138 kit
Part Number:OMAP-L138Which debugger we need for development on TMDXLCDK138 kit. XDS100V2 or XDS110?Thanks in advanceAshish
View ArticleRTOS/OMAP-L138: Do TI-RTOS support both cores ARM and C6748 on OMAP-L138
Part Number:OMAP-L138Tool/software:TI-RTOSDear All,Do TI-RTOS or SYS/BIOS supports both cores ARM and C6748 on OMAP-L138
View ArticleLinux/OMAP-L138: Clock device tree support in latest Davinci Git
Part Number:OMAP-L138Tool/software: LinuxI'm working on implementing a device tree for my OMAP L-138 based platform. I am using Linux and have recently pulled from the most recent davinci git. I...
View ArticleClik here to view.
SECDEVTOOL-OMAPL138C6748: How to wake up ARM from DSP Secondary Bootloader?
Part Number:SECDEVTOOL-OMAPL138C6748Hi everybody,I am writing a DSP secondary boot loader for secure enabled OMAP-L138 chip, in which I need to wake up ARM core and assign entrypoints to both ARM and...
View ArticleHow to configure PLL0 Clkout to output pin
Hi there, I'm using bootloader design from the starter ware (bootloader_armv5_omapl138_lcdkOMAPL138)And have made changes to boot DSP at 456MHz which works and also added settings to enable 12MHz clock...
View Article