Starterware/TMS320C6748: TMS320C6748 LCDK, Digital input and sampling rate...
Part Number:TMS320C6748Tool/software: StarterwareI want to get technical support about TMS320C6748 LCDK.I downloaded Starterware 01.20.01.01 and i used McASP. There are some problems.First of all, i...
View ArticleClik here to view.
SECDEVTOOL-OMAPL138C6748: How to load data to ARM Local RAM from DSP core
Part Number:SECDEVTOOL-OMAPL138C6748Hi there,I am writing a DSP secondary bootloader for secure enabled OMAP-L138 chip and having problem with loading code sections to ARM Local RAM from DSP.To...
View ArticleRTOS/OMAP-L138: Resolve the ambiguity in ti document
Part Number:OMAP-L138Tool/software:TI-RTOSDear All,Please resolve the ambiguity regarding EMAC and SPI,Under Supported Platform->Drivers->DSP devices, it says OMAP-L13x EVM supports EMAC and SPI...
View ArticleAM1808: Enet Multicast packets are received even though MACHASHx are zero
Part Number:AM1808Hi,a customer has an issue with the AM1808 EMAC where it receives a multicast packet, even though the MACHASH1 and 2 are zeroed out:We have found that if our test PC transmits an...
View ArticleRTOS/OMAPL137-HT: Questions about SYSBIOS Cache Constants
Part Number:OMAPL137-HTTool/software:TI-RTOSHi,I'm trying to figure out a strange cache behavior. #define Cache_Type_L1P ti_sysbios_family_c64p_Cache_Type_L1P#define Cache_Type_L1D...
View ArticleOMAP-L138: Compatible with Purepath Studio?
Part Number:OMAP-L138Hello,I'm searching for an evaluation board to test the DSP capabilities of the purepath studio. Is the OMAP-L138 Development Kit (LCDK)or TMS320C6748 DSP Development Kit (LCDK)Are...
View ArticleCCS/OMAP-L138: Big memory leak
Part Number:OMAP-L138Tool/software: Code Composer StudioHi all,I have a series problem with memory on ompl138, that the program.#include <stdio.h>#include <stdlib.h>int main(){FILE...
View ArticleRTOS/OMAP-L138: OMAP-L138 uPP data lost
Part Number:OMAP-L138Tool/software:TI-RTOSI use uPP port for interfacing to tranceiver. Q channel is used for receive data and I channel for transmit.At startup I enqueue two descriptors for Q and I...
View ArticleLoading .out file through command line(not CCS).
HelloI am searching for a tool/software that will let me load the program to the RAM. I don't want to do it through Code composer.I need a stand alone tool with commands interface.Best tool is command...
View ArticleRTOS/LINUXSDK-OMAPL138: Using tlc4541 ADC and OMAPL138 to Digitize 40kHz Signal
Part Number:LINUXSDK-OMAPL138Tool/software:TI-RTOSI am using TLC4541 ADC and C6748 core on OMAPL138 to digitize a 40kHz signal with 100kHz sampling rate. A function is run by TI-RTOS every 10...
View ArticleStarterware/TMS320C6748: Failed to send small udp packet < 18bytes on...
Part Number:TMS320C6748Tool/software: StarterwareHello Champs,Customer used starterware 1.2 for UDP, if he send <18 bytes data, the host could not receive the packet. He found the packet length is...
View ArticleRE: making combined AIS file from ARM and DSP *.out files
How can i use this ARM and DSP Both Combined APP
View ArticleStarterware/OMAPL138B-EP: OMAPL138 EDMA3_1_CC0 problem
Part Number:OMAPL138B-EPTool/software: StarterwareHello!I'am using StarterWare and trying to use EDMA3_1_CC0 channel controller to read/write flash through SPI0 interface.Everything works fine with...
View ArticleStarterware: How to flash and boot the sample ARM and DSP starterware Both...
Tool/software: StarterwareHow to flash and boot the sample ARM and DSP starterware Both app on OMAPL138 LCDK board
View ArticleStarterware/OMAPL138B-EP: Waiting for SFT on the OMAP-L138... in Custom Board.
Part Number:OMAPL138B-EPTool/software: Starterwarei am flash the final application using serial portwhen i use the LCDKL138 Board no Problemif i use Cutom Board i have the Problem as follows(AIS...
View ArticleRTOS/OMAPL138B-EP: Is the OMAPL138 supported in RTOS OMAPL3X SDK?
Part Number:OMAPL138B-EPTool/software:TI-RTOSHello,I have inherited a project that was built using an older SYS/BIOS on the ARM and DSP side of the OMAPL138 processor. My goal is to bring the project...
View ArticleLinux/OMAP-L138: Processor SDK: Linux on ARM cannot coexist with McASP...
Part Number:OMAP-L138Tool/software: LinuxHello,This is an issue I have had for some time in various permutations, but I had hoped that the new SDK would remedy some of the issues. As the title...
View ArticleSECDEVTOOL-OMAPL138C6748: Does the JTAG debugger has access to ARM Local RAM?
Part Number:SECDEVTOOL-OMAPL138C6748Hi everybody,I am trying to write a DSP code using the PRUSS in secure-enabled OMAPL138 to load some ARM code to ARM Local RAM (or IRAM: 0xFFFF0000 - 0xFFFFFFFF), so...
View ArticleCCS/OMAP-L138: Can C6748 DSP determine if the chip is an OMAP or DSP
Part Number:OMAP-L138Tool/software: Code Composer StudioI have code running on the C6748 chip and on the C6748 of the OMAP L138. Can the DSP read a register to determine if the code is running on the...
View ArticleRTOS/OMAP-L137: Non-dispatched interrupt service routine keeps being called...
Part Number:OMAP-L137Tool/software:TI-RTOSHi all,I am trying to setup a non-dispatched interrupt for the USB0 controller of an OMAP-L137 in the SYS/BIOS cfg file (I am hoping to improve USB...
View Article