Part Number: TMS320C6748

Cannot generate OUT file.

Build variable 'C6000_CSL_CG_ROOT' cannot be resolved.

Part Number: AM5728

Hi Champs,

I also refer this previous thread to confirm default clock tool value information based on previous e2e thread.

So, I tried to get default clock tree setting as bellow. However, it didn't work. I used industrial IDK. 

Could you please tell us this advice or if you have another idea to confirm it , please let us know.

Regards,

Kaz

Part Number: AM6548

Hi ,

I am trying to build arago-base-tisdk-image for AM6548 .

Shell has been configured as dash.

i am getting the following error during build:

ERROR: input-utils-1.0-r0 do_configure: oe_runmake failed
ERROR: input-utils-1.0-r0 do_configure: Function failed: do_configure (log file is located at /home/shruthi/TI/tisdk/build/arago-tmp-external-arm-toolchain/work/aarch64-linux/input-utils/1.0-r0/temp/log.do_configure.30907)
ERROR: Logfile of failure stored in: /home/shruthi/TI/tisdk/build/arago-tmp-external-arm-toolchain/work/aarch64-linux/input-utils/1.0-r0/temp/log.do_configure.30907
Log data follows:
| DEBUG: Executing shell function do_configure
| NOTE: make DESTDIR=/home/shruthi/TI/tisdk/build/arago-tmp-external-arm-toolchain/work/aarch64-linux/input-utils/1.0-r0/image clean
| ERROR: oe_runmake failed
| Make.config:1: *** empty variable name. Stop.
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/shruthi/TI/tisdk/build/arago-tmp-external-arm-toolchain/work/aarch64-linux/input-utils/1.0-r0/temp/log.do_configure.30907)

Part Number: TDA2EVM5777

Hello,

I am working on Vision SDK 3.06 and REL.TIDL.01.01.03.00, and attempting the workflow described in the E2E thread https://e2e.ti.com/support/processors/f/791/t/735984.

The final step in the thread requires test of the model by running the inference in host emulation.

For this, I followed section 3.5 of the TIDL Library User Guide. Specifically, as per section 3.5.2, I executed the following command:

D:\REL.TIDL.01.01.03.00\modules\ti_dl\test>gmake CORE=eve TARGET_BUILD=debug TARGET_PLATFORM=PC all

but I received the following error message:

LINK : fatal error LNK1104: cannot open file '../../ti_dl/lib/PC/eve/debug/tidl_algo.lib'
gmake: *** [outfile] Error 1104

Kindly note that I have satisfied all other pre-requisites mentioned in section 3.5.

I can see the following files, but I think they are applicable for execution on the target:

../../ti_dl/lib/dsp/debug/tidl_algo.lib

../../ti_dl/lib/dsp/release/tidl_algo.lib

../../ti_dl/lib/eve/debug/tidl_algo.lib

../../ti_dl/lib/eve/release/tidl_algo.lib

I searched on E2E, but I did not find a relevant solution.

How can I resolve the above linker error and complete my host emulation build?

Thank you.

Thanks Hari,

Do we have any instructions to compile it by adding the debug logs ? Could you please share the instructions if you have any ? 

Regards,

Kiran 

Part Number: AM5718

Tool/software: Code Composer Studio

Hii,

What is the maximum data size that we can transfer using MCSPI in AM5718 processor ?

We are accessing ARINC429 through MCSPI1(drivers). In which we need to access 5bytes(1byte opcode + 4 bytes data)  to read a FIFO.

We need CS to be active for 5bytes continuously.

How can I do this ?

NOTE : We have tried with 8bit data size , but it does not work.

Thanks and Regards

Arpita Jena

Part Number: AM5728

Hi,

I'am using TI AM5728 IDK, P/N: 296-46780-ND kit with Linux SDK ver:05.03.00.07(i.e ti-processor-sdk-linux-am57xx-evm-05.03.00.07-Linux-x86-Install.bin).

I want to build the SDK for NOR image.

1. How to enable the NOR build

2. where to specify the NOR Flash Image Layout. It should have sections like: Uboot, Kernel, RootFs, Application.

3. How to define the flash section for Application in the NOR.

4.Which linker scatter file I've to update for sections.

5. please specify the location of static libraries, .so files, .KO(kernel objects), exe files. simple example Makefile.

Thanks and Regards

srinivasa

Part Number: AM5728

Hi,

We ran the omapdrmtest on android. We are getting the following error. Please help!

./dmabuftest -s 35:800x480 -d /dev/video1 -c 800x480@YUYV
Opening Display..
using 1 connectors, 800x480 display, multiplanar: 1
Setting mode 800x480 on connector 35, crtc 39
ERROR:post_buffer:298: Could not post buffer on crtc 39: Permission denied (-13)
Opening V4L2..
Exported buffer fd = 6

Exported buffer fd = 8

Exported buffer fd = 10

Exported buffer fd = 12

Exported buffer fd = 14

Exported buffer fd = 16

ERROR:post_vid_buffer:419: failed to enable plane 48: Permission denied
ERROR:capture_loop:79: Post buffer failed

We ran the modetest utility and found the id of our LCD from it. The logs are attached.

Android SDK is 5.03!

Please HELP!!

(Please visit the site to view this file)

Part Number: TDA2P-ABZ

Team,

Could you please help answer the following question. 

while reading the PDK TDA Release notes I saw the following under “Known Limitations” (see: http://processors.wiki.ti.com/index.php/PDK/PDK_TDA_Release_Notes):

“CAL/ISS Driver

• PDK-2136: Pixel Corruption is seen for 12bit MIPI format. Applicable for TDA3xx and TDA2Px platforms.”

Do you have further information on this?

I couldn’t find a detailed explanation on this known limitation. It was added to Known Issues in PDK release 1.09.00 and added to known limitations with release 1.10.00.

If you have further information on this, my follow up questions are:

• Is this a problem exclusively with the CAL driver in the CSL or only in combination with the ISS driver?
• Is RAW12 meant with the 12bit MIPI format?

Thanks,

Needhu

Part Number: DRA71XEVM

hi  Team:

1. Do DSP and ARM use different DDRS to improve performance?Or can it be Shared?

2. DRA718  recommended PMIC is TPS65919? What is the timing of power supply?

3. if I want to use AEC-Q100 phy, Which PN do you recommend?

4. Can DRA718 power consumption assessment form be provided?

5. in the EVM,use  LP873220 power for  DDR3L, When the power is on, ARM does not work, U42 how to ensure the output is 1.35v?

Part Number: AM4372

Hi,

How can I debug this backtrace

[  448.501855] -----------[ cut here ]-----------
[  448.506782] WARNING: CPU: 0 PID: 1318 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x24c/0x394()
[  448.516910] 44000000.ocp:L3 Standard Error: MASTER M1 (128-bit) TARGET EMIF (Read Link): At Address: 0x6C826680 : Data Access in User mode during Functional access
[  448.532360] Modules linked in: uinput usb_f_ecm u_ether usb_f_acm u_serial libcomposite configfs bcmdhd cfg80211 xhci_plat_hcd xhci_hcd usbcore printer_core(O) vfi_sysmode vfi_powerbutton evdev omapdrm joydev mousedev dwc3 syscopyarea sysfillrect sysimgblt fb_sys_fops panel_gpm udc_core ti_am335x_adc atmf_rotate drm_kms_helper kfifo_buf phy_omap_usb2 fb gpio_vf6111(O) vfraptor_matrix_keypad pwm_beeper drm snd_soc_tlv320aic31xx snd_soc_davinci_mcasp snd_soc_edma snd_soc_simple_card snd_soc_core rtc_vf2111_sec pn512(O) snd_compress snd_pcm_dmaengine snd_pcm omapdss rtc_pcf85063 pinctrl_wkup atmel_mxt_ts vf2111_swcharger platinfomod(O) printer_io(O) rtc_vfsetget vfi_panel_probe bq27xxx_battery vbus_flt_mon gpio_tps65218 ti_magadc snd_timer matrix_keymap omap_hsmmc snd bq2416x_charger dwc3_omap mmc_core extcon_class soundcore regmap_spi ti_am335x_tscadc scr(O) regmap_mmio phy_omap_control iio_ntc_thermistor omap_ocp2scp pwm_bl backlight ntc_thermistor vf6111(O)
[  448.622557] CPU: 0 PID: 1318 Comm: sysmode Tainted: G        W  O 3.14.43 #1
[  448.630013] Backtrace:
[  448.632632] [<c010a6a0>] (dump_backtrace+0x0/0x10c) from [<c010a83c>] (show_stack+0x18/0x1c)
[  448.641559]  r6:00000093 r5:00000009 r4:dad5fbf0 r3:454ace40
[  448.647582] [<c010a824>] (show_stack+0x0/0x1c) from [<c04aee64>] (dump_stack+0x20/0x28)
[  448.656063] [<c04aee44>] (dump_stack+0x0/0x28) from [<c0132de4>] (warn_slowpath_common+0x6c/0x8c)
[  448.665459] [<c0132d78>] (warn_slowpath_common+0x0/0x8c) from [<c0132ea8>] (warn_slowpath_fmt+0x38/0x40)
[  448.675487]  r8:c05b0288 r7:c05afe90 r6:c04da6a4 r5:80080001 r4:dd90c650
[  448.682619] [<c0132e74>] (warn_slowpath_fmt+0x4/0x40) from [<c0327330>] (l3_interrupt_handler+0x24c/0x394)
[  448.692832]  r3:dd90c8c0 r2:c05aff5c
[  448.696638] [<c03270e4>] (l3_interrupt_handler+0x0/0x394) from [<c01696dc>] (handle_irq_event_percpu+0x54/0x1c4)
[  448.707400]  r10:dd807e00 r9:c073ca5b r8:0000003a r7:00000000 r6:00000000 r5:dd90c2c0
[  448.715710]  r4:dd90c2c0
[  448.718401] [<c0169688>] (handle_irq_event_percpu+0x0/0x1c4) from [<c01698a4>] (handle_irq_event+0x58/0x8c)
[  448.728704]  r10:00000000 r9:00000000 r8:00000000 r7:dad5fdb4 r6:00000000 r5:dd90c2c0
[  448.737017]  r4:dd807e00
[  448.739711] [<c016984c>] (handle_irq_event+0x0/0x8c) from [<c016c548>] (handle_fasteoi_irq+0x7c/0x160)
[  448.749554]  r5:0000003a r4:dd807e00
[  448.753357] [<c016c4cc>] (handle_fasteoi_irq+0x0/0x160) from [<c0168f30>] (generic_handle_irq+0x28/0x38)
[  448.763382]  r4:0000003a r3:c016c4cc
[  448.767181] [<c0168f08>] (generic_handle_irq+0x0/0x38) from [<c0107880>] (handle_IRQ+0x38/0x8c)
[  448.776384]  r4:c072a8b0 r3:00000218
[  448.780179] [<c0107848>] (handle_IRQ+0x0/0x8c) from [<c0100808>] (gic_handle_irq+0x3c/0x54)
[  448.789010]  r6:dad5fd80 r5:c070841c r4:fa24010c r3:00000100
[  448.795028] [<c01007cc>] (gic_handle_irq+0x0/0x54) from [<c010b5b8>] (__irq_svc+0x78/0xd4)
[  448.803770] Exception stack(0xdad5fd80 to 0xdad5fdc8)
[  448.809119] fd80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  448.817774] fda0: 00000000 00000000 00000000 00000000 00000000 dad5fdd0 c0120f78 c0120ebc
[  448.826425] fdc0: 600f0193 ffffffff
[  448.830113]  r6:ffffffff r5:600f0193 r4:c0120ebc r3:c0120f78

Part Number: AM3352

Hi team, I using a LTE module through TUSB4041 connect to AM3352 USB1, when power on LTE module, Linux Kernel can correct enumerate every usb devices，dmesg as follow：
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.38 (test@test-virtual-machine) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP PREEMPT Fri Aug 23 12:52:06 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: PDZ852-SENSOR
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 48 MiB at 0x8a800000
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (neon)
[ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x440 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s31756 r8192 d21492 u61440
[ 0.000000] pcpu-alloc: s31756 r8192 d21492 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.0.2:/home/test/rootfs/rootfs-dev,nolock rw ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0::eth0:off
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 199428K/262144K available (7168K kernel code, 232K rwdata, 1844K rodata, 1024K init, 253K bss, 13564K reserved, 49152K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (8160 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 233 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 254 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000021] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000051] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000068] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000316] timer_probe: no matching timers found
[ 0.000589] Console: colour dummy device 80x30
[ 0.000683] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.118666] pid_max: default: 32768 minimum: 301
[ 0.118873] Security Framework initialized
[ 0.118896] Yama: becoming mindful.
[ 0.119026] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.119049] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.120301] CPU: Testing write buffer coherency: ok
[ 0.120396] CPU0: Spectre v2: using BPIALL workaround
[ 0.120971] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.178771] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.198663] rcu: Hierarchical SRCU implementation.
[ 0.238658] smp: Bringing up secondary CPUs ...
[ 0.238682] smp: Brought up 1 node, 1 CPU
[ 0.238698] SMP: Total of 1 processors activated (597.60 BogoMIPS).
[ 0.238711] CPU: All CPU(s) started in SVC mode.
[ 0.241021] devtmpfs: initialized
[ 0.258930] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.259576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.259614] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.264267] pinctrl core: initialized pinctrl subsystem
[ 0.266039] NET: Registered protocol family 16
[ 0.271938] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.301796] l4_wkup_cm:clk:0010:0: failed to disable
[ 0.357350] cpuidle: using governor ladder
[ 0.357422] cpuidle: using governor menu
[ 0.365237] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0)
[ 0.365375] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31)
[ 0.365450] OMAP GPIO hardware version 0.1
[ 0.366369] gpio gpiochip1: Persistence not supported for GPIO 28
[ 0.366389] GPIO line 60 (ETHPHY_RESET_CTRL) hogged as output/high
[ 0.366694] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1)
[ 0.366824] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63)
[ 0.367886] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2)
[ 0.368006] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95)
[ 0.369281] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3)
[ 0.369426] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127)
[ 0.382263] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.426940] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.427934] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/fixedregulator0[0]'
[ 0.428443] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/fixedregulator1[0]'
[ 0.429114] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/fixedregulator2[0]'
[ 0.431426] media: Linux media interface: v0.10
[ 0.431505] videodev: Linux video capture interface: v2.00
[ 0.431568] pps_core: LinuxPPS API ver. 1 registered
[ 0.431582] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.431619] PTP clock support registered
[ 0.431673] EDAC MC: Ver: 3.0.0
[ 0.439539] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.441642] clocksource: Switched to clocksource timer1
[ 0.456523] NET: Registered protocol family 2
[ 0.457777] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.457832] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.457877] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.457934] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.458089] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.458129] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.458538] NET: Registered protocol family 1
[ 0.489718] RPC: Registered named UNIX socket transport module.
[ 0.489743] RPC: Registered udp transport module.
[ 0.489756] RPC: Registered tcp transport module.
[ 0.489768] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.491277] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 0.493553] Initialise system trusted keyrings
[ 0.494024] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.502908] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.514091] NFS: Registering the id_resolver key type
[ 0.514154] Key type id_resolver registered
[ 0.514168] Key type id_legacy registered
[ 0.514238] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.514893] pstore: using deflate compression
[ 0.518316] Key type asymmetric registered
[ 0.518343] Asymmetric key parser 'x509' registered
[ 0.518448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.528837] io scheduler noop registered
[ 0.528860] io scheduler deadline registered
[ 0.529150] io scheduler cfq registered (default)
[ 0.529170] io scheduler mq-deadline registered
[ 0.529185] io scheduler kyber registered
[ 0.531980] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[ 0.618717] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 0.624364] omap_uart 44e09000.serial: no wakeirq for uart0
[ 0.624435] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@44e09000[0]'
[ 0.624476] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a OMAP UART0
[ 1.305993] console [ttyO0] enabled
[ 1.310539] omap_uart 48022000.serial: no wakeirq for uart1
[ 1.316509] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48022000[0]'
[ 1.316671] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 31, base_baud = 3000000) is a OMAP UART1
[ 1.327169] omap_uart 48024000.serial: no wakeirq for uart2
[ 1.333125] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@48024000[0]'
[ 1.333245] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 32, base_baud = 3000000) is a OMAP UART2
[ 1.343700] omap_uart 481a6000.serial: no wakeirq for uart3
[ 1.349587] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@481a6000[0]'
[ 1.349704] 481a6000.serial: ttyO3 at MMIO 0x481a6000 (irq = 33, base_baud = 3000000) is a OMAP UART3
[ 1.360280] omap_uart 481a8000.serial: no wakeirq for uart4
[ 1.366304] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@481a8000[0]'
[ 1.366422] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 34, base_baud = 3000000) is a OMAP UART4
[ 1.376930] omap_uart 481aa000.serial: no wakeirq for uart5
[ 1.382881] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp/serial@481aa000[0]'
[ 1.382998] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 35, base_baud = 3000000) is a OMAP UART5
[ 1.394750] omap_rng 48310000.rng: Random Number Generator ver. 20
[ 1.417947] brd: module loaded
[ 1.434199] loop: module loaded
[ 1.441021] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 1.441039] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 1.441052] mdio_bus fixed-0: No GPIO consumer reset found
[ 1.441095] libphy: Fixed MDIO Bus: probed
[ 1.461454] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset
[ 1.461469] mdio_bus 4a101000.mdio: using device tree for GPIO lookup
[ 1.461503] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@4a100000/mdio@4a101000[0]'
[ 1.461528] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/ethernet@4a100000/mdio@4a101000[0]'
[ 1.461542] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup
[ 1.461554] mdio_bus 4a101000.mdio: No GPIO consumer reset found
[ 1.511718] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ 1.519781] davinci_mdio 4a101000.mdio: detected phy mask fffffff5
[ 1.539089] libphy: 4a101000.mdio: probed
[ 1.543491] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver NatSemi DP83620/DP83630/83640 Without PTP
[ 1.555139] davinci_mdio 4a101000.mdio: phy[3]: device 4a101000.mdio:03, driver NatSemi DP83620/DP83630/83640 Without PTP
[ 1.567832] cpsw 4a100000.ethernet: Detected MACID = 0c:ae:7d:73:e0:9d
[ 1.575004] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 1.581786] cpsw 4a100000.ethernet: ALE Table size 1024
[ 1.587324] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
[ 1.596601] cpsw 4a100000.ethernet: cpsw: Detected MACID = 0c:ae:7d:73:e0:9f
[ 1.606052] i2c /dev entries driver
[ 1.611537] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.619954] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.641964] cpuidle: enable-method property 'ti,am3352' found operations
[ 1.649757] sdhci: Secure Digital Host Controller Interface driver
[ 1.656420] sdhci: Copyright(c) Pierre Ossman
[ 1.662047] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd
[ 1.662061] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.662121] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@48060000[0]' - status (0)
[ 1.662225] gpio gpiochip0: Persistence not supported for GPIO 6
[ 1.662247] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[ 1.671396] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.676330] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp
[ 1.676341] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.676368] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@48060000[0]'
[ 1.676390] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@48060000[0]'
[ 1.676404] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup
[ 1.676416] omap_hsmmc 48060000.mmc: No GPIO consumer wp found
[ 1.677024] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
[ 1.712192] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd
[ 1.712221] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 1.712281] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 1.712325] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 1.712351] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 1.712374] omap_hsmmc 481d8000.mmc: No GPIO consumer cd found
[ 1.712401] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp
[ 1.712420] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 1.712461] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]'
[ 1.712501] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]'
[ 1.712525] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 1.712545] omap_hsmmc 481d8000.mmc: No GPIO consumer wp found
[ 1.713636] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
[ 1.745463] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.754388] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-sys/leds-sys0[0]' - status (0)
[ 1.754538] gpio gpiochip2: Persistence not supported for GPIO 4
[ 1.754553] no flags found for gpios
[ 1.754934] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-sys/leds-sys1[0]' - status (0)
[ 1.754974] gpio gpiochip2: Persistence not supported for GPIO 2
[ 1.754987] no flags found for gpios
[ 1.755892] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user0[0]' - status (0)
[ 1.755999] gpio gpiochip3: Persistence not supported for GPIO 21
[ 1.756013] no flags found for gpios
[ 1.756363] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user1[0]' - status (0)
[ 1.756402] gpio gpiochip2: Persistence not supported for GPIO 1
[ 1.756414] no flags found for gpios
[ 1.756706] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user2[0]' - status (0)
[ 1.756744] gpio gpiochip3: Persistence not supported for GPIO 18
[ 1.756896] no flags found for gpios
[ 1.757326] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user3[0]' - status (0)
[ 1.757369] gpio gpiochip0: Persistence not supported for GPIO 7
[ 1.757381] no flags found for gpios
[ 1.757826] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user4[0]' - status (0)
[ 1.757867] gpio gpiochip1: Persistence not supported for GPIO 22
[ 1.757879] no flags found for gpios
[ 1.758297] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user5[0]' - status (0)
[ 1.758337] gpio gpiochip1: Persistence not supported for GPIO 18
[ 1.758350] no flags found for gpios
[ 1.758773] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user6[0]' - status (0)
[ 1.758813] gpio gpiochip1: Persistence not supported for GPIO 24
[ 1.758950] no flags found for gpios
[ 1.759380] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user7[0]' - status (0)
[ 1.759419] gpio gpiochip0: Persistence not supported for GPIO 22
[ 1.759432] no flags found for gpios
[ 1.759854] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user8[0]' - status (0)
[ 1.759892] gpio gpiochip0: Persistence not supported for GPIO 26
[ 1.759905] no flags found for gpios
[ 1.760351] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-user/led-user9[0]' - status (0)
[ 1.760390] gpio gpiochip1: Persistence not supported for GPIO 12
[ 1.760403] no flags found for gpios
[ 1.761362] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out0[0]' - status (0)
[ 1.761406] gpio gpiochip1: Persistence not supported for GPIO 17
[ 1.761418] no flags found for gpios
[ 1.761888] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out1[0]' - status (0)
[ 1.761931] gpio gpiochip1: Persistence not supported for GPIO 19
[ 1.761944] no flags found for gpios
[ 1.762368] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out2[0]' - status (0)
[ 1.762408] gpio gpiochip1: Persistence not supported for GPIO 23
[ 1.762421] no flags found for gpios
[ 1.762875] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out3[0]' - status (0)
[ 1.762915] gpio gpiochip2: Persistence not supported for GPIO 0
[ 1.762928] no flags found for gpios
[ 1.763229] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out4[0]' - status (0)
[ 1.763267] gpio gpiochip0: Persistence not supported for GPIO 30
[ 1.763280] no flags found for gpios
[ 1.765377] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.774271] sc1161y_probe() function is called.
[ 1.779088] of_get_named_gpiod_flags: parsed 'pwren-gpio' property of node '/ocp/spi@481a0000/encryption@0[0]' - status (0)
[ 1.779137] of_get_named_gpiod_flags: parsed 'ctrlcs-gpio' property of node '/ocp/spi@481a0000/encryption@0[0]' - status (0)
[ 1.779510] sc1161y encryption probe ok: got minor 63
[ 1.786654] NET: Registered protocol family 10
[ 1.804643] Segment Routing with IPv6
[ 1.808735] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.816604] NET: Registered protocol family 17
[ 1.821558] Key type dns_resolver registered
[ 1.826359] mmc1: new high speed MMC card at address 0001
[ 1.832374] Registering SWP/SWPB emulation handler
[ 1.837419] omap_voltage_late_init: Voltage driver support not added
[ 1.844147] random: fast init done
[ 1.849998] Loading compiled-in X.509 certificates
[ 1.859698] mmcblk1: mmc1:0001 IS004G 3.64 GiB
[ 1.872740] mmcblk1boot0: mmc1:0001 IS004G partition 1 2.00 MiB
[ 1.879750] mmcblk1boot1: mmc1:0001 IS004G partition 2 2.00 MiB
[ 1.894351] mmcblk1rpmb: mmc1:0001 IS004G partition 3 512 KiB, chardev (244:0)
[ 1.915311] mmcblk1: p1 p2 p3 p4
[ 1.933155] rtc rtc0: alarm rollover: day
[ 1.933867] rtc rtc0: rx8025: dev (252:0)
[ 1.933904] rtc-rx8025 0-0032: rtc core: registered rx8025 as rtc0
[ 1.940898] at24 0-0050: GPIO lookup for consumer wp
[ 1.940912] at24 0-0050: using device tree for GPIO lookup
[ 1.940948] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/i2c@44e0b000/baseboard_eeprom@50[0]'
[ 1.940973] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/i2c@44e0b000/baseboard_eeprom@50[0]'
[ 1.940988] at24 0-0050: using lookup tables for GPIO lookup
[ 1.941001] at24 0-0050: No GPIO consumer wp found
[ 1.941493] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[ 1.948791] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.956716] pca953x 1-0020: GPIO lookup for consumer reset
[ 1.956733] pca953x 1-0020: using device tree for GPIO lookup
[ 1.956766] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/i2c@4802a000/pca9555@20[0]'
[ 1.956788] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/i2c@4802a000/pca9555@20[0]'
[ 1.956803] pca953x 1-0020: using lookup tables for GPIO lookup
[ 1.956814] pca953x 1-0020: No GPIO consumer reset found
[ 1.956986] pca953x 1-0020: Linked as a consumer to regulator.3
[ 1.993332] gpiochip_find_base: found new base at 496
[ 1.993682] gpio gpiochip4: (pca9555): added GPIO chardev (254:4)
[ 1.993824] gpiochip_setup_dev: registered GPIOs 496 to 511 on device: gpiochip4 (pca9555)
[ 1.993918] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ 2.000485] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out0[0]' - status (0)
[ 2.000524] gpio gpiochip1: Persistence not supported for GPIO 17
[ 2.000531] no flags found for gpios
[ 2.000749] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out1[0]' - status (0)
[ 2.000771] gpio gpiochip1: Persistence not supported for GPIO 19
[ 2.000778] no flags found for gpios
[ 2.000957] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out2[0]' - status (0)
[ 2.000977] gpio gpiochip1: Persistence not supported for GPIO 23
[ 2.000984] no flags found for gpios
[ 2.001141] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out3[0]' - status (0)
[ 2.001163] gpio gpiochip2: Persistence not supported for GPIO 0
[ 2.001169] no flags found for gpios
[ 2.001323] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out4[0]' - status (0)
[ 2.001343] gpio gpiochip0: Persistence not supported for GPIO 30
[ 2.001350] no flags found for gpios
[ 2.001509] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out5[0]' - status (0)
[ 2.002417] no flags found for gpios
[ 2.003631] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out6[0]' - status (0)
[ 2.004241] no flags found for gpios
[ 2.005382] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out7[0]' - status (0)
[ 2.005997] no flags found for gpios
[ 2.007151] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds-iio/led-out8[0]' - status (0)
[ 2.007746] no flags found for gpios
[ 2.009549] rtc-rx8025 0-0032: Starting synchronization hwclcok to system clock
[ 2.017374] rtc-rx8025 0-0032: Synchronization ...

[ 3.073300] rtc-rx8025 0-0032: Complete synchronization hwclcok to system clock(15)
[ 3.081416] rtc-rx8025 0-0032: setting system clock to 2019-08-23 13:53:58 UTC (1566568438)
[ 3.090354] rtc-rx8025 0-0032: Read system clock:tv_sec=(1566568438), tv_usec=208972
[ 3.116124] net eth0: initializing cpsw version 1.12 (0)
[ 3.222138] NatSemi DP83620/DP83630/83640 Without PTP 4a101000.mdio:01: attached PHY driver [NatSemi DP83620/DP83630/83640 Without PTP] (mii_bus:phy_addr=4a101000.mdio:01, irq=POLL)
[ 3.246801] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.322855] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 6.341842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.371853] IP-Config: Complete:
[ 6.375268] device=eth0, hwaddr=0c:ae:7d:73:e0:9d, ipaddr=192.168.0.15, mask=255.255.255.0, gw=192.168.0.1
[ 6.386210] host=192.168.0.15, domain=, nis-domain=(none)
[ 6.392538] bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
[ 6.429695] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 6.437522] devtmpfs: mounted
[ 6.443808] Freeing unused kernel memory: 1024K
[ 6.449180] Run /sbin/init as init process
[ 7.933382] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.965395] systemd[1]: Detected architecture arm.
[ 8.045266] systemd[1]: Set hostname to <>.
[ 8.068268] systemd[1]: Hardware watchdog 'OMAP Watchdog', version 0
[ 8.076899] systemd[1]: Set hardware watchdog to 20s.
[ 9.998739] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.007115] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.043231] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.062361] systemd[1]: Created slice System Slice.
[ 10.092491] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.105719] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 10.145663] systemd[1]: Listening on Syslog Socket.
[ 10.184320] systemd[1]: Listening on Journal Socket.
[ 10.482495] random: crng init done
[ 10.487517] random: 7 urandom warning(s) missed due to ratelimiting
[ 12.519279] systemd-journald[81]: Received request to flush runtime journal from PID 1
[ 20.108488] CAN device driver interface
[ 20.743188] c_can_platform 481cc000.can: c_can_platform device registered (regs=baa7f7cc, irq=41)
[ 22.583761] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 23.055889] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 23.248791] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 23.439278] omap-aes 53500000.aes: will run requests pump with realtime priority
[ 29.869212] net eth1: initializing cpsw version 1.12 (0)
[ 29.983004] NatSemi DP83620/DP83630/83640 Without PTP 4a101000.mdio:03: attached PHY driver [NatSemi DP83620/DP83630/83640 Without PTP] (mii_bus:phy_addr=4a101000.mdio:03, irq=POLL)
[ 29.986035] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 37.075945] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer reset
[ 37.075969] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 37.076014] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 37.076040] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 37.076057] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 37.076070] am335x-phy-driver 47401300.usb-phy: No GPIO consumer reset found
[ 37.076083] am335x-phy-driver 47401300.usb-phy: GPIO lookup for consumer vbus-detect
[ 37.076092] am335x-phy-driver 47401300.usb-phy: using device tree for GPIO lookup
[ 37.076115] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 37.076137] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[ 37.076149] am335x-phy-driver 47401300.usb-phy: using lookup tables for GPIO lookup
[ 37.076159] am335x-phy-driver 47401300.usb-phy: No GPIO consumer vbus-detect found
[ 37.076516] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.2
[ 37.217044] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer reset
[ 37.217069] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 37.217123] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 37.217148] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 37.217167] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 37.217180] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer reset found
[ 37.217194] am335x-phy-driver 47401b00.usb-phy: GPIO lookup for consumer vbus-detect
[ 37.217203] am335x-phy-driver 47401b00.usb-phy: using device tree for GPIO lookup
[ 37.217226] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpios' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 37.217247] of_get_named_gpiod_flags: can't parse 'vbus-detect-gpio' property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[ 37.217260] am335x-phy-driver 47401b00.usb-phy: using lookup tables for GPIO lookup
[ 37.217270] am335x-phy-driver 47401b00.usb-phy: No GPIO consumer vbus-detect found
[ 37.217623] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.2
[ 38.529858] usbcore: registered new interface driver usbfs
[ 38.529977] usbcore: registered new interface driver hub
[ 38.552789] usbcore: registered new device driver usb
[ 39.184765] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 39.184861] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
[ 39.245144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 39.245170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 39.245181] usb usb1: Product: MUSB HDRC host driver
[ 39.245192] usb usb1: Manufacturer: Linux 4.19.38 musb-hcd
[ 39.245202] usb usb1: SerialNumber: musb-hdrc.0
[ 39.253378] hub 1-0:1.0: USB hub found
[ 39.253539] hub 1-0:1.0: 1 port detected
[ 39.303383] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 39.303475] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
[ 39.311155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 39.311178] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 39.311189] usb usb2: Product: MUSB HDRC host driver
[ 39.311200] usb usb2: Manufacturer: Linux 4.19.38 musb-hcd
[ 39.311210] usb usb2: SerialNumber: musb-hdrc.1
[ 39.334449] hub 2-0:1.0: USB hub found
[ 39.359201] hub 2-0:1.0: 1 port detected
[ 39.822074] usb 2-1: new high-speed USB device number 2 using musb-hdrc
[ 40.002604] usb 2-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00
[ 40.002628] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 40.002640] usb 2-1: SerialNumber: DB0000712C4B
[ 40.005172] hub 2-1:1.0: USB hub found
[ 40.005603] hub 2-1:1.0: 4 ports detected
[ 59.516099] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 59.645613] Bridge firewalling registered
[ 63.412216] Initializing XFRM netlink socket
[ 65.297560] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 142.701749] usb 2-1.4: new high-speed USB device number 3 using musb-hdrc
[ 142.844960] usb 2-1.4: New USB device found, idVendor=3763, idProduct=3c93, bcdDevice= 3.18
[ 142.845000] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 142.845022] usb 2-1.4: Product: Android
[ 142.845042] usb 2-1.4: Manufacturer: Android
[ 142.845063] usb 2-1.4: SerialNumber: 20ae3d01
[ 143.606949] usbcore: registered new interface driver option
[ 143.627659] usbserial: USB Serial support registered for GSM modem (1-port)
[ 143.628734] option 2-1.4:1.0: GSM modem (1-port) converter detected
[ 143.659818] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 143.685703] option 2-1.4:1.1: GSM modem (1-port) converter detected
[ 143.716096] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 143.754958] option 2-1.4:1.2: GSM modem (1-port) converter detected
[ 143.775886] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 143.823364] cdc_ether 2-1.4:1.3 usb0: register 'cdc_ether' at usb-musb-hdrc.1-1.4, CDC Ethernet Device, 7a:22:a9:af:4f:ad
[ 143.827125] option 2-1.4:1.5: GSM modem (1-port) converter detected
[ 143.827899] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
[ 143.867902] usbcore: registered new interface driver cdc_ether
[ 149.993438] cdc_ether 2-1.4:1.3 lte0: renamed from usb0

Linux Kernel enumerate four ttyUSB and one CDC Ethernet Device, both devices working fine. lsusb info as follow：
root@test# lsusb
Bus 002 Device 005: ID 3763:3c93
Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@test# lsusb -t
/: Bus 02.Port 1: Dev 1, class="root_hub", Driver=musb-hdrc/1p, 480M
|__ Port 1: Dev 4, If 0, class="Hub", Driver=hub/4p, 480M
|__ Port 4: Dev 5, If 0, class="Vendor" Specific Class, Driver=option, 480M
|__ Port 4: Dev 5, If 1, class="Vendor" Specific Class, Driver=option, 480M
|__ Port 4: Dev 5, If 2, class="Vendor" Specific Class, Driver=option, 480M
|__ Port 4: Dev 5, If 3, class="Communications", Driver=cdc_ether, 480M
|__ Port 4: Dev 5, If 4, class="CDC" Data, Driver=cdc_ether, 480M
|__ Port 4: Dev 5, If 5, class="Vendor" Specific Class, Driver=option, 480M
/: Bus 01.Port 1: Dev 1, class="root_hub", Driver=musb-hdrc/1p, 480M

When I do this operation : power off (or unplug)LTE module when usb devices using, the kernel enter stop status. ttyO0 Console and networing stop , have no response , kernel heartbeat led stop flashing. Also dmesg don't print any more info about this errors.

But, in this status, I unplug TUSB4041 form AM3352 USB1, the kernel return to normal working immediately，heartbeat led start flashing. ttyO0 Console and networing return to work fine.dmesg also print usb disconnect info now.
[ 260.966850] usb 2-1: USB disconnect, device number 2
[ 260.966898] usb 2-1.4: USB disconnect, device number 3
[ 260.980230] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 260.980577] option 2-1.4:1.0: device disconnected
[ 260.988297] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 260.988598] option 2-1.4:1.1: device disconnected
[ 261.003237] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 261.003471] option 2-1.4:1.2: device disconnected
[ 261.004611] cdc_ether 2-1.4:1.3 lte0: unregister 'cdc_ether' usb-musb-hdrc.1-1.4, CDC Ethernet Device
[ 261.034563] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 261.034718] option 2-1.4:1.5: device disconnected

On this issue, I did two additional tests:
1)AM3352 + TUSB4041 + LTE module , Before power off the module , i do two steps:
1.dhcpcd -k usb0
2.close all opened ttyUSB device
After this operations, I power off the module, the kernel don't enter stop , eveything working fine, dmesg print usb disconnect info immediately:
[ 3298.326609] usb 2-1.4: USB disconnect, device number 5
[ 3298.332465] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 3298.332700] option 2-1.4:1.0: device disconnected
[ 3298.337618] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 3298.337788] option 2-1.4:1.1: device disconnected
[ 3298.343423] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 3298.343604] option 2-1.4:1.2: device disconnected
[ 3298.344022] cdc_ether 2-1.4:1.3 lte0: unregister 'cdc_ether' usb-musb-hdrc.1-1.4, CDC Ethernet Device
[ 3298.384089] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5
[ 3298.384243] option 2-1.4:1.5: device disconnected
and usb hub still working fine:
root@test# lsusb
Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@test# lsusb -t
/: Bus 02.Port 1: Dev 1, class="root_hub", Driver=musb-hdrc/1p, 480M
|__ Port 1: Dev 4, If 0, class="Hub", Driver=hub/4p, 480M
/: Bus 01.Port 1: Dev 1, class="root_hub", Driver=musb-hdrc/1p, 480M

2)AM3352 + LTE module , I connect LTE module direct to AM3352 USB1 with no usb hub，at this time， When USB devices working，I power off （or unplug）LTE module , kernel still working fine, don't enter stop , eveything working fine, dmesg print usb disconnect info immediately.

PS.I did all tests on PROCESSOR-SDK-LINUX-AM335X 06_00_00_07 , 05.03.00.07, 04.03.00.05, the same problem happened.

So, after doing these tests, My question is this a kernel driver bug, how can i fix it?

Part Number: PHYTC-3P-PHYCORE-AM65X

after installing the SDK, I try to run cd bin/program_evm/binaries/evmk2h/ but the directory doent exist. Is there an option on the install that I need?

cd bin/program_evm/binaries/evmk2h/
ln -sv ../../../../board-support/prebuilt-images/u-boot-spi-k2hk-evm.gph nor.bin
ln -sv ../../../../filesystem/tisdk-server-rootfs-image-k2hk-evm.ubi nand.bin

Part Number: SMV320C6727B-SP

Team,

I see the recommended operating frequency is 250MHz. What's the actual maximum operating frequency?

Thank you.

Part Number: TDA3LA

Hi,

We would like to find out if it's possible to configure CW on the AWR1243 from TDA3 VIsion SDK framework. If so, please instruct us how that can be accomplished.

Thanks,

--Khai

Part Number: AM5718

Hi,

I am having AM5718IDK and TLV320AIC3104EVM-k alongwith USB MODEVM Motherboard connected to it.

I want to connect J7 (USB Type B Slave Connector) of USB MODEVM Motherboard with  J23 (USB Standard A-Type Connector) of AM5718IDK. 

How to cofigure the TLV320AIC3104EVM-k codec card through USB connector and how to read the codec output data in AM5718. Kindly provide the startup application or example application.

Part Number: TMS320DM8168

Tool/software: TI C/C++ Compiler

Hello,

As mentioned in the latest DM8168 datasheet,  DM8168(CYG2) cpu devices speed range is as below :

ARM:1100MHz ,  DSP:930MHz , HDVICP2:550MHz , SGX530:275MHz ... ... ...

But In my DVRRDK code ,  ARM_PLL was set to 1.2GHz or 1.0GHz , So we want to set AMR work at the highest speed 1.1GHz. 

How to set the paramates in  "clocks_ti816x.h" to make A8 work at 1.1GHz ?  Is there any tools to caculate these parameters ？

Part Number: PROCESSOR-SDK-AM65X

Hello TI team,

OSPI on current SDK 6.0.0.7 is not working, somehow we found a workaround to boot the EVM. But later we found sd card (MMC1) is not working at all. Please help to investigate.

Thank you.

Best Regards

Part Number: TDA2P-ACD

hi,ti experts:

when we change the DDR from winbond to ISSI, the device can not boot up rightly:

the log is below:

Invalid Magic String in Boot Image
The Magic String is 0x43520000

Invalid Magic String in Boot Image
The Magic String is 0x43520040

Invalid Magic String in Boot Image
The Magic String is 0x43527fc3

Invalid Magic String in Boot Image
The Magic String is 0x435200ea

Invalid Magic String in Boot Image
The Magic String is 0x435200ea

Invalid Magic String in Boot Image
The Magic String is 0x4352fb88

Invalid Magic String in Boot Image
The Magic String is 0x4352fb88

Valid App Image is not Available

The ISSI DDR has the same capacity as winbond, 2Gb, and the same hardware connection.

the emif register configuration is shown above(revision 2.0.2)

I fill the value of the generated register into the TDA2Px_set_emif1_params_ddr3_666 function()  which in sbl_utils_tda2px_ddr_config.c, then found that the device cannot start properly

so, TI experts, can you tell me how to solve this problem? thanks very much!!

Part Number: TMDSEVM437X

Is there any place to find the design files for the TI camera module 4P0041?

We would need this in order to prepare boards for compatibility testing of other parallel CMOS modules with AM437x CPUs...