Part Number: PROCESSOR-SDK-AM57X

Hello,

I can't build the Android File System using the repo manifest contained in ti-processor-sdk-android-am57xx-evm-06.00.00.07/board-support/aosp-9.0 or with the repo manifest offered on the Android download page.

This attempt log is after a full repo sync:

mmckee@ubuntu:~/.../board-support/aosp-9.0$ pwd
/home/mmckee/ti-processor-sdk-android-am57xx-evm-06.00.00.07/board-support/aosp-9.0
mmckee@ubuntu:~/.../board-support/aosp-9.0$ make -j8 clean
15:24:50 Entire build directory removed.
mmckee@ubuntu:~/.../board-support/aosp-9.0$ . build/envsetup.sh 
including device/generic/car/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-mips64/vendorsetup.sh
including device/generic/mini-emulator-mips/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/generic/uml/vendorsetup.sh
including device/google/cuttlefish/vendorsetup.sh
including device/google/marlin/vendorsetup.sh
including device/google/muskie/vendorsetup.sh
including device/google/taimen/vendorsetup.sh
including device/linaro/hikey/vendorsetup.sh
including device/ti/am65xevm/vendorsetup.sh
including sdk/bash_completion/adb.bash
mmckee@ubuntu:~/.../board-support/aosp-9.0$ lunch am57xevm_full-userdebug
build/make/core/product_config.mk:229: error: Can not locate config makefile for product "am57xevm_full".
15:25:06 dumpvars failed with: exit status 1
mmckee@ubuntu:~/.../board-support/aosp-9.0$ ls device/ti/
am65xevm  beagle_x15  beagle_x15-kernel

Looking through the am57xx manifest files, it appears that there is no "device" sources for the am57xx being pulled in. Are the manifest files or the "Building the SDK" guide incorrect?

Thanks,
Matt McKee

Part Number: TMS320C6678

Hello SRIO experts,

(a bit of background : we are a team quite experienced with SRIO on C6678, having implemented it and debugged it for around 5 years, we know how to manage doorbell retries, restart transactions etc.)

Today on a running system at the lab, we have a strange issue

Most of the time the system is running perfectly.

Under very specific conditions the system blocks.
Analysis shows that a SRIO transaction with doorbell didn't work : the data was not written, the doorbell not sent

Using the TI GEL file that is very helpful to debug SRIO conditions, we looked at the initiator of the transaction

The port error status of the port 0 has the following value : 0x180002
Meaning port ok, output retry encountered, output retried

It's the first time we encounter "Output retried" (bit 19)
the doc says "Output port has received a packet-retry control symbol and can not make forward
progress. This bit is set when bit 18 is set and is cleared when a packet-accepted or a
packet-not-accepted control symbol is received (read-only)."

Bit 18 is "Output retry-stopped".
According to the doc (and to the SRIO spec) it should be set along with bit 19. --> this is strange and not conform to the spec

Anyway does anyone why such an error can occur ? and how to recover from it ?

Best regards
Clement

Part Number: PROCESSOR-SDK-AM65X

Hi,

Does anyone know how to get gstreamer 1.14 onto the am65? I can only find 1.12 in the sdk.

Thank you,

SC

Part Number: AM6548

Tool/software: Code Composer Studio

Hi Processors/CCS Team,

Is it possible to flash a DRA804M/AM6548 device using a lauterbach, CSS, and GEL files? I know the standard use case is to use an XDS debugger, but my customer is specifically asking about a lauterbach. What does the support here look like?

Thanks!
Barend

Part Number: TMDXLCDK138

Hi 

I have two questions

1. In the beginning of the following wiki page 

http://processors.wiki.ti.com/index.php/OMAP-L138_LCDK_Schematic_Companion

there is a link to another page named "LCDK User Guide" which is dead.

http://processors.wiki.ti.com/index.php/LCDK_User_Guide

It is supposed to have the schematics apparently. Can you provide a working link for that?

2. I have corrupted the accompanying sd card of the LCDK apparently by a mistimed powering off the board.

Is there a way to download or reburn the contents of the card?

Thanks.

Part Number: AM5728

Just wanted to confirm is EMU0 and EMU1 required for boundary scan?  Do these signals need to be routed so that boundary scan test equipment has access to these signals?

Part Number: PROCESSOR-SDK-AM65X

Hello,

I am working on trying to port the latest (v06.00) Android SDK to our AM65x-based platform. Right now, I have Android booting successfully but some of the interface elements are being drawn incorrectly and I am having difficulty figuring out exactly where the configuration that governs this type of thing resides. When comparing our design to the AM65x EVM, we're using an 800x480 display while the EVM is using a 1280x800 display.

Problems:
The EVM shows a "Tablet is starting..." screen as an intermediary between the Android logo boot screen and the usable UI. We don't see this screen when we boot. The EVM has its navigation bar oriented along the bottom of the screen, while ours is oriented along the right edge of the screen and all of the buttons are superimposed upon one another. The EVM has a clean, dark themed Google search bar at the top of its screen, ours has an out-of-date silver/white theme.

Of the above problems, only the issue with the navigation bar is truly worrisome, but all three problems considered together indicates that something related to the display is being misconfigured. Our device configuration is nearly identical to TI's AM65x device configuration. The overlay directory tree is exactly the same. Our device is configured with TARGET_BOARD_PLATFORM set to "am65x" so the contents of hardware/ti/am65x are being used and vendor/ti/am65x/am65x.mk is being included.

Any advice on how to configure Android to properly use this LCD would be greatly appreciated.

Thanks,
Matt McKee

Part Number: AM5728

I'm trying to get a streaming application going, streaming from an AM5728 EVM to a browser page.  I would like to do the compression using one of the ducati compression implementations, e.g. ducatih264enc.  I can't make this work.

I have been able to make this work using theora, e.g.:

gst-launch-1.0 -v videotestsrc ! theoraenc ! oggmux  ! tcpserversink host="192.168.1.8" port=5000

This however does the encoding in the main micro, not the DSP, so performance-wise it doesn't handle actual video from a camera.

Can anyone provide an example pipeline that uses one of the ducati compression implementations, that provides a video stream viewable in a webpage? 

Best regards,

Bob.

Part Number: DM3730

We meet a sound problem on LogicPD's SOM DM3730 with CODEC TPS65950.  It has a sound bug during pilot test: our device sound outpu becomes abnormal occasionally. Noise will not automatically dissapear until tune off the power. If you repeatedly turn on and off the power about 1/30 chance the abnormal noise will come again. 

We cut off the back stage and tested the TPS65950 output wave form when device play a 500Hz sine sound file. 

Figure 1 abnormal sound wave

 While the normal wave on other device is bellowing, no high frequency noise.

Figure 2 . normal wave

Then we use logic analyzer sampled the I2S data in TP2 and found when sound abnormal , data is ok!

Figure 3  data collected from I2S when audio abnormal

We collecected the audio wave and do FFT in Matlab to find the noise freq is about 7KHz

Figure 4 FFT result when sound abnormal

Also we can compare the normal one, no 7K componets:

Figure 5 FFT result when normal, only 500Hz and it's hamonical components.

In order to locate the problem, we have tried 2 changes by software modification. one is change the audio sorce sample rate from 8K to 16K. Thenthe occasion sound abnormal became always abnormal.  We assume there may be some registers configure wrong. But we check it is by read back all the regs value it is the same with another normal device.

Another try is add a manually reset button to reconfigure all the regs when sound abnormal. And it works. 

Now I am woundering what cause the 7K occasional noise. And what solusion to prevent the abnormal happen since we can't put an extra reset button in our system. So please help and analysis this case, Thank you!

Part Number: 66AK2H12

Hi all,

Customer use 66AK A and B EMIF all used 5 pcs DDR chip.

But it can't pass the SI test because the DQS signal range from +750mV~-1V like below. 

As I know the voltage range positive and negative symmetry. Could you please help to identify the reason? or Can I set the register to adjust it?  Here is the ddr setting.  (Please visit the site to view this file)thanks!

 BR,
Denny

Part Number: AM5728

Tool/software: Linux

Hi, 

My SDK : ti-processor-sdk-linux-rt-am57xx-evm-06.00.00.07

----------------------------------------------------------------------------------------

I get the following error when compiling the SDK. How can I fix it?

================================
Building CMEM Module
================================
/bin/sh: 51: export: --sysroot: bad variable name
make: *** [Makefile:450: cmem-mod] error 2

Part Number: 66AK2G12

Hi there!

Our application board(installed 66ak2g12) use pciess for transfer data between PC system and DSP.

On most pc systems. there is no problem. board is controlled under windows OS via PCI express interface.

On some pc system, link training sequence is failed.

following is the LTSSM dump in pcieWaitLinkUp.

1) Success case : 

Starting link training...
Info[000000] : PCIE_DEBUG0[0x0c004a02], PCIE_DEBUG1[0x0800f700]
Info[000001] : PCIE_DEBUG0[0x03006211], PCIE_DEBUG1[0x08000010]
Link is up.

2) Fail case : 

(note ltssmState  is PCIE_DEBUG0, debug1 is PCIE_DEBUG1)

Starting link training...
Info[000000] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000001] : ltssmState[0x0000bc42], debug1[0x08000000]
Info[000002] : ltssmState[0x00000002], debug1[0x08000000]
Info[000003] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000004] : ltssmState[0x00000002], debug1[0x08000000]
Info[000005] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000006] : ltssmState[0x00000002], debug1[0x08000000]
Info[000007] : ltssmState[0x0000f742], debug1[0x08000000]
Info[000008] : ltssmState[0x0000bc42], debug1[0x08000000]
Info[000009] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000010] : ltssmState[0x00006402], debug1[0x08000000]
Info[000011] : ltssmState[0x00000202], debug1[0x08000000]
Info[000012] : ltssmState[0x00004a02], debug1[0x08000000]

....

Info[000667] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000668] : ltssmState[0x00006402], debug1[0x08000000]
Info[000669] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000670] : ltssmState[0x0000bc42], debug1[0x08000000]
Info[000671] : ltssmState[0x00004a02], debug1[0x08000000]
Info[000672] : ltssmState[0x0000f742], debug1[0x08000000]
Info[000673] : ltssmState[0x0000bc43], debug1[0x08000000]
Info[000674] : ltssmState[0x00004a03], debug1[0x08000000]
Info[000675] : ltssmState[0x0000bc43], debug1[0x08000000]
Info[000676] : ltssmState[0x00004a03], debug1[0x08100000]
Info[000677] : ltssmState[0x0000bc43], debug1[0x08000000]
Info[000678] : ltssmState[0x0000b503], debug1[0x08000000]
Info[000679] : ltssmState[0x00004a03], debug1[0x08000000]
Info[000680] : ltssmState[0x0000bc43], debug1[0x08100000]
Info[000681] : ltssmState[0x0000b503], debug1[0x08000000]
Info[000682] : ltssmState[0x0000bc43], debug1[0x08100000]
Info[000683] : ltssmState[0x0000bc43], debug1[0x08000000]

....

finally, time out  exit and last ltssm is 0x03.

.

What can i do to solve this issue.

Part Number: TMS320C6655

Dears

  We is used in application TMS320C6655 network interface, when use TI provides the NDK package, encounter problems, needs in interval between two send package more than 3-4 ms to normal to send, interval with sleep function implementation, if the interval is lower than 3 ms software program will run to fly, freezes, operation is not normal, but the interval for application is too big, need around 100-200 us, please help to analysis what is the cause of this?Or does the NDK software routine need to be applied in this way?Thank you very much!

Part Number: DM3730

Hi,

I want get the CPU usage of DSP, but I don't have debugger, so I can't get CPU load through the CCStudio.

Is there any other manner to calculate the CPU usage? Looking forward your reply.

IC:DM3730

BIOS:5.33.03

Part Number: AM6526

Hi,

I read the below thread.

https://e2e.ti.com/support/processors/f/791/p/741291/2741356#2741356

It describes as follows;

AM65x is IO coherent with A53 caches, so traffic from any peripheral into MSMC SRAM and DDR is kept coherent with A53 caches.

Yes as long as the data is in MSMC SRAM or DDR. PCIe read will snoop the most recent data as long as the memory page/region is marked outer shared and cacheable in MMU and NBSS registers.

Do you have some code examples of GPMC or PCIe with DMA, which customer can confirm cache coherency ? If possible, TI-RTOS is preferred, but Linux is OK as well.

Since data transaction between memory and peripheral with keeping cache coherency is important for them, they want to evaluate its performance on EVM.

DMA (Data Movement Architecture) on AM65x looks excellent. Do you have any deep dive or training materials for NAVSS, UDMA, UTC, DRA, etc … with more illustrations ?

Thanks and regards,

Hideaki

Part Number: AM5718

Tool/software: Linux

Hi,

am5718 has a custom board.

I want to change the LCD display method to am5728 evm method.

The difference between the two is that all the pins are connected to the LCD without using the DSI.

Do you know how to change the driver part if you make this change?

Hi

I have two questions.

I am preparing for a TDA4M bringup. We use RTOS and Linux. We probably to prepare two OS version(RTOS and RTOS-Linux)

First, I can't find the location of the memory map source. In TDA2, we modified the *.xs files in the following location

vision_sdk/apps/build/tda2px/mem_segment_definition_bios.xs --> RTOS

vision_sdk/apps/build/tda2px/mem_segment_definition_linux.xs --> Linux

Part Number: 66AK2H12

Hi Champs,

The following document mentioned

TMS320C66x DSP CorePac User Guide. 4.5 Memory Attribute Register (MARn) Definition defined Bit 2-1（PCX and WTE） as Reserved

Also, we recognized these bit ( Bit 2（PCX）or 1（WTE）) value difference affect to active time. So, it affect some device function.  

And also current MARn default value is Bit2 (PCX) = '1'. Bit1 (WTE) ='0'.

【Question ①】

Could you please tell us correct value for MAR setting ?

If we would like to enable MAR effectively , do we have to set  '1' for Bit 0 (PC) and Bit 3 (PFX) it mean 0x9 ?

As our experience, 0x09 setting is very fast , 0xD or 0xF is very slow.

Accourding to TMS320C66x DSP CorePac User GuideのTable 4-22 , this Bit 0(PC) initial value =0.

However, when we confirm debugger memory view MAR register , this MAR register for Bit0 (PC) is 1 or 0 on the setMar().

Also, according this URL TMS320C66x DSP CorePac User Guide show opposite opinion. 

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/sysbios/6_41_04_54/exports/bios_6_41_04_54/docs/cdoc/ti/sysbios/family/c66/Cache.html#.P.C.X

"The 'pc' ("Permit Caching") field is enabled for all memory regions in the device platform. Only set the fields of the Mar structure which need to be modified. Any field not set retains its reset value."

Could you please tell us  this default value Bit0 (PC) 1 or 0, or expressly set or undefined value ? 

Could you please answer this correct value  between TMS320C66x DSP CorePac User Guide and above link consistency and consider Bit2 and Bit 1 affection  ?

Regards,

Kz777

Part Number: AM3358

Respected sir,

               I am trying to add SPI to my yocto image. I found the following link which was useful.

But here i am confused about where to find the files which needs to be changed. I want to modify the bbb-4dcape70t.dtb from ROOT/boot/   to add SPI.

So where to find the bbb-4dcape70t.dts file which i can modify??

Where to find the file to set "CONFIG_SPI_SPIDEV=y"??

Do i need to change my kernal-recipe?? If yes where to find .bbappend file (linux-ti-staging-4.4.bbappend)??

If there are any other changes I need to do add SPI please suggest.

Regards,

Digvijay

Part Number: TMDSCSK8127

Hi, I have a problem with  TMDSCSK8127

I working with TMS320DM8127 Camera Starter Kit  according  to TMDSCSK8127 Quick Start Guide (Literature Number: SPRUID6)

and when I run system from SD card the following happens:

-u-boot is running

-Kernel is running

-filesystem, arago project is running

-and then, after 15 seconds after start booting,the system just restarts and starts working again  from running u-boot

-it all repeats

As a result, I can’t run the demo project, I can’t understand what can be done with this

Here is the log. What's the problem?

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000014] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008259] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017836] OMAP clocksource: timer1 at 20000000 Hz
[    0.023127] Console: colour dummy device 80x30
[    0.027822] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086967] pid_max: default: 32768 minimum: 301
[    0.091916] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098827] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106861] Initializing cgroup subsys io
[    0.111090] Initializing cgroup subsys memory
[    0.115705] Initializing cgroup subsys devices
[    0.120375] Initializing cgroup subsys freezer
[    0.125053] Initializing cgroup subsys pids
[    0.129462] CPU: Testing write buffer coherency: ok
[    0.134900] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142654] devtmpfs: initialized
[    0.168002] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215866] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227968] pinctrl core: initialized pinctrl subsystem
[    0.234699] NET: Registered protocol family 16
[    0.240867] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253448] OMAP GPIO hardware version 0.1
[    0.265595] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298320] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305836] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319411] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333062] media: Linux media interface: v0.10
[    0.337893] Linux video capture interface: v2.00
[    0.342776] pps_core: LinuxPPS API ver. 1 registered
[    0.347984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357506] PTP clock support registered
[    0.361632] EDAC MC: Ver: 3.0.0
[    0.365617] Advanced Linux Sound Architecture Driver Initialized.
[    0.373148] clocksource: Switched to clocksource timer1
[    0.390354] NET: Registered protocol family 2
[    0.395673] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402943] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409608] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416320] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422423] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429127] NET: Registered protocol family 1
[    0.434032] RPC: Registered named UNIX socket transport module.
[    0.440212] RPC: Registered udp transport module.
[    0.445161] RPC: Registered tcp transport module.
[    0.450086] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.458002] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.464967] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481685] NFS: Registering the id_resolver key type
[    0.487055] Key type id_resolver registered
[    0.491447] Key type id_legacy registered
[    0.497176] io scheduler noop registered
[    0.501307] io scheduler deadline registered
[    0.506029] io scheduler cfq registered (default)
[    0.512248] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592279] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603082] console [ttyS0] disabled
[    0.606930] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615851] console [ttyS0] enabled
[    0.615851] console [ttyS0] enabled
[    0.623023] bootconsole [earlycon0] disabled
[    0.623023] bootconsole [earlycon0] disabled
[    0.632740]   Reference Linux version 4.4.12
[    0.637060]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655568] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661440] cmemk initialized
[    0.671437] loop: module loaded
[    0.733198] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739328] libphy: 4a100800.mdio: probed
[    0.744184] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.753045] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762741] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792180] mousedev: PS/2 mouse device common for all mice
[    0.798589] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.805903] i2c /dev entries driver
[    0.810277] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.817369] sdhci: Secure Digital Host Controller Interface driver
[    0.823596] sdhci: Copyright(c) Pierre Ossman
[    0.948477] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.967328] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.973661] mmc0: new high speed SDIO card at address 0001
[    0.983355] Synopsys Designware Multimedia Card Interface Driver
[    0.989804] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.996748] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.008021] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.015330] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.022809] NET: Registered protocol family 10
[    1.029543] sit: IPv6 over IPv4 tunneling driver
[    1.035014] NET: Registered protocol family 17
[    1.039705] Key type dns_resolver registered
[    1.044252] omap_voltage_late_init: Could not get sys clk.
[    1.050059] Power Management for TI81XX.
[    1.059231] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.064463] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.071839] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.078297] nand: Micron MT29F2G16ABAEAWP
[    1.082330] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.089966] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.095389] 8 ofpart partitions found on MTD device 8000000.nand
[    1.101423] Creating 8 MTD partitions on "8000000.nand":
[    1.106781] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.114335] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.124398] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.131377] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.140145] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.153177] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.173221] mmc1: new high speed SDHC card at address 0007
[    1.193192] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.198976]  mmcblk0: p1 p2
[    1.239447] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.246722] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.257434] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.279962] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.287028] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.293768] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.300709] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.309954] omap_rtc 480c0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    1.331688] wlan-en-regulator: disabling
[    1.335991] ALSA device list:
[    1.338975]   #0: TI81XX-CSK
[    1.344127] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    2.508953] EXT4-fs (mmcblk0p2): recovery complete
[    2.513812] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.521982] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    2.536548] devtmpfs: mounted
[    2.540119] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    2.546521] This architecture does not have kernel memory protection.
[    2.820305] systemd[1]: System time before build time, advancing clock.
[    2.840936] random: systemd urandom read with 11 bits of entropy available
[    2.859488] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    2.878162] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    2.904346] systemd[1]: Set hostname to <ti81xx>.
[    3.147916] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    3.265107] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    3.283551] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    3.303598] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    3.336757] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    3.354416] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    3.373521] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    3.393370] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    3.413346] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    3.433387] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    3.453585] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    3.483549] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    3.507171] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    3.562340] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    3.587435] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    3.653679] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    3.683895] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    3.733970] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    3.763458] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    3.789273] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    3.820357] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    3.875536] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    3.917546] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    3.933765] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    3.956863] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    3.987217] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    4.043579] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    4.063675] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    4.093601] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    4.113546] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    4.134606] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started Synchronize System and HW clocks.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Serial Getty on ttyS0.
[    5.216731] autorun-usecase.sh[111]: numid=1,iface=MIXER,name='PCM Playback Volume'
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
         Starting uim-sysfs.service...
[    5.242406] autorun-usecase.sh[111]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[  OK  ] Started D-Bus System Message Bus.
[    5.281680] autorun-usecase.sh[111]:   : values=115,115
[    5.311625] autorun-usecase.sh[111]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[    5.333231] autorun-usecase.sh[111]: numid=31,iface=MIXER,name='PGA Capture Volume'
[    5.361634] autorun-usecase.sh[111]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    5.382215] autorun-usecase.sh[111]:   : values=72,72
[    5.401584] autorun-usecase.sh[111]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[    5.423621] autorun-usecase.sh[111]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[    5.451771] autorun-usecase.sh[111]:   ; type=BOOLEAN,access=rw------,values=1
[    5.471712] autorun-usecase.sh[111]:   : values=on
[    5.493459] autorun-usecase.sh[111]: numid=46,iface=MIXER,name='Left PGA Mixer Mic2L Switch'
[    5.521878] autorun-usecase.sh[111]:   ; type=BOOLEAN,access=rw------,values=1
         Starting Network Service...
[    5.541569] autorun-usecase.sh[111]:   : values=on
[    5.561827] autorun-usecase.sh[111]: Mount mtd6 and mtd7 partitions
[  OK  ] Started System Logging Service.
[  OK  ] Started Kernel Logging Service.
[    5.683045] ubi0: attaching mtd6
[    5.814907] net eth0: initializing cpsw version 1.10 (0)
[    5.820266] net eth0: initialized cpsw ale version 1.3
[    5.828780] net eth0: phy found : id is : 0x2000a231
[    5.833839] libphy: PHY  not found
[    5.837261] net eth0: phy "" not found on slave 1, err -19
[  OK  ] Started Network Service.
[    5.901034] ubi0: scanning is finished
[    5.951548] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    5.957571] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.964502] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    5.971234] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.978241] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    5.984202] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.991459] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    6.000656] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    6.010306] ubi0: background thread "ubi_bgt0d" started, PID 144
[    6.039595] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.226405] autorun-usecase.sh[111]: UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    6.863342] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 149
[    6.912507] UBIFS (ubi0:0): recovery needed
[    6.980800] UBIFS (ubi0:0): recovery completed
[    6.985416] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    6.993406] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.003386] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    7.013536] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    7.020014] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[    7.789227] ubi1: attaching mtd7
[  OK  ] Started uim-sysfs.service.
         Starting telnetd.service...
[  OK  ] Started telnetd.service.
[    8.060968] ubi1: scanning is finished
[    8.099510] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    8.105897] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    8.112803] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    8.119561] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    8.126571] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    8.132606] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    8.139878] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    8.149067] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    8.160759] ubi1: background thread "ubi_bgt1d" started, PID 167
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[    8.232520] autorun-usecase.sh[111]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[  OK  ] Reached target Multi-User System.
[    8.783200] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 178
[    8.805874] UBIFS (ubi1:0): recovery needed
[    8.828814] UBIFS (ubi1:0): recovery completed
[    8.833412] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    8.841370] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    8.851360] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    8.861860] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    8.868526] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model
[    9.824102] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.832030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.998129] autorun-usecase.sh[111]: wifi: in STA mode
[   10.753345] cfg80211: World regulatory domain updated:
[   10.758571] cfg80211:  DFS Master region: unset
[   10.762949] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.772780] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.780843] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.788900] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.796962] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.806508] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.816050] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.824206] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.832248] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login: [   11.563344] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   11.953779] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   11.980098] wlcore: loaded
[   12.901668] autorun-usecase.sh[111]: command failed: Network is down (-100)
[   12.916007] autorun-usecase.sh[111]: command failed: Network is down (-100)
[   13.413857] <1>SysLink version : 2.21.02.10
[   13.413857] SysLink module created on Date:May  9 2017 Time:11:40:06
[   13.424480] <1>Trace enabled
[   13.427374] <1>Trace SetFailureReason enabled
[   13.542033] autorun-usecase.sh[111]: /dev/mem opened.
[   13.543597] autorun-usecase.sh[111]:              Phy Addr : 0x48181560 Data : 0x00000002
[   13.544821] autorun-usecase.sh[111]: secss put in low power state
[   13.545979] autorun-usecase.sh[111]:              Phy Addr : 0x48180f10 Data : 0x00000000
[   13.547127] autorun-usecase.sh[111]:              Phy Addr : 0x48180508 Data : 0x00000302
[   13.548297] autorun-usecase.sh[111]:              Phy Addr : 0x48180520 Data : 0x00000002
[   13.549440] autorun-usecase.sh[111]:              Phy Addr : 0x48180524 Data : 0x00000002
[   13.560545] autorun-usecase.sh[111]:              Phy Addr : 0x48180528 Data : 0x00000002
[   13.562102] autorun-usecase.sh[111]:              Phy Addr : 0x4c0000e4 Data : 0x00170209
[   13.563393] autorun-usecase.sh[111]:              Phy Addr : 0x4d0000e4 Data : 0x00170209
[   13.564673] autorun-usecase.sh[111]:              Phy Addr : 0x4c0000e4 Data : 0x00170209
[   13.565900] autorun-usecase.sh[111]:              Phy Addr : 0x4d0000e4 Data : 0x00170209
[   13.567114] autorun-usecase.sh[111]: DDR IOs RX is shutdown
[   13.914954] wlcore: PHY firmware version: Rev 8.2.0.0.232
[   14.026196] wlcore: firmware booted (Rev 8.9.0.0.48)
[   14.039050] random: nonblocking pool is initialized
[   14.051393] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.500402] autorun-usecase.sh[111]: /opt/ipnc/autorun-usecase.sh: line 52: kill: (226) - No such process
[   14.525732] autorun-usecase.sh[111]:  [host]  Setting DMM priority for [ISS     ] to [0] ( 0x4e000634 = 0x00080000 )
[   14.529512] autorun-usecase.sh[111]:  [host]  Setting L3 bandwidth regulator for [ISS     ] to [press=[3,3] BW=400, WM Cycles=2500]
[   14.533316] autorun-usecase.sh[111]:  [host]  Setting L3 bandwidth regulator for [HDVICP0 ] to [press=[0,0] BW=900, WM Cycles=2500]
[   14.537993] autorun-usecase.sh[111]:  [host]  Setting DMM priority for [HDVICP0 ] to [1] ( 0x4e000634 = 0x00000009 )
[   14.598995] autorun-usecase.sh[111]: insmod: ERROR: could not insert module sbull.ko: File exists
[   15.621381] autorun-usecase.sh[111]: mkfs.fat 3.0.28 (2015-05-16)
[   15.622917] autorun-usecase.sh[111]: unable to get drive geometry, using default 255/63
[   15.624056] autorun-usecase.sh[111]: /dev/sbulla has 255 heads and 63 sectors per track,
[   15.625157] autorun-usecase.sh[111]: hidden sectors 0x0000;
[   15.626255] autorun-usecase.sh[111]: logical sector size is 512,
[   15.627353] autorun-usecase.sh[111]: using 0xf8 media descriptor, with 1024 sectors;
[   15.628502] autorun-usecase.sh[111]: drive number 0x80;
[   15.629573] autorun-usecase.sh[111]: filesystem has 2 16-bit FATs and 4 sectors per cluster.
[   15.639594] autorun-usecase.sh[111]: FAT size is 1 sector, and provides 247 clusters.
[   15.644157] autorun-usecase.sh[111]: There is 1 reserved sector.
[   15.645693] autorun-usecase.sh[111]: Root directory contains 512 slots and uses 32 sectors.
[   15.647384] autorun-usecase.sh[111]: Volume ID is 9bcc63a6, no volume label.
[   15.893767] Mass Storage Function, version: 2009/09/11
[   15.898957] LUN: removable file: (no medium)
[   15.903754] LUN: removable file: /dev/sbulla
[   15.908051] Number of LUNs=1
[   15.941375] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[   15.948433] g_mass_storage gadget: userspace failed to provide iSerialNumber
[   15.955544] g_mass_storage gadget: g_mass_storage ready
[   16.006275] autorun-usecase.sh[111]: Creat queue id:0
[   16.008141] autorun-usecase.sh[111]: queue id:0
[   16.011153] autorun-usecase.sh[111]: Creat queue id:32769
[   16.012619] autorun-usecase.sh[111]: queue id:32769
[   16.020899] autorun-usecase.sh[111]: Creat queue id:65538
[   16.024132] autorun-usecase.sh[111]: queue id:65538
[   16.030099] autorun-usecase.sh[111]: Creat queue id:98307
[   16.031676] autorun-usecase.sh[111]: queue id:98307
[   16.037183] autorun-usecase.sh[111]: queue id:32769
[   16.109225] autorun-usecase.sh[111]:  [host] Attached to slave procId 1.
[   16.335126] autorun-usecase.sh[111]:  [host] Attached to slave procId 2.
[   16.337535] autorun-usecase.sh[111]:  [host] Loaded file ./firmware/ipnc_rdk_fw_m3video.xem3 on slave procId 1.
[   16.762574] autorun-usecase.sh[111]:  [host] Started slave procId 1.
[   16.764845] autorun-usecase.sh[111]:  [host] Attached to slave procId 0.
[   16.814641] autorun-usecase.sh[111]:  [host] After Ipc_loadcallback status [0x00000000]
[   16.818273] autorun-usecase.sh[111]:  [host] Loaded file ./firmware/ipnc_rdk_fw_m3vpss.xem3 on slave procId 2.

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000014] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008259] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017835] OMAP clocksource: timer1 at 20000000 Hz
[    0.023124] Console: colour dummy device 80x30
[    0.027819] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086965] pid_max: default: 32768 minimum: 301
[    0.091914] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098825] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106856] Initializing cgroup subsys io
[    0.111084] Initializing cgroup subsys memory
[    0.115698] Initializing cgroup subsys devices
[    0.120369] Initializing cgroup subsys freezer
[    0.125047] Initializing cgroup subsys pids
[    0.129457] CPU: Testing write buffer coherency: ok
[    0.134892] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142644] devtmpfs: initialized
[    0.167974] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227955] pinctrl core: initialized pinctrl subsystem
[    0.234687] NET: Registered protocol family 16
[    0.240858] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253447] OMAP GPIO hardware version 0.1
[    0.265586] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298305] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305830] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319406] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333056] media: Linux media interface: v0.10
[    0.337887] Linux video capture interface: v2.00
[    0.342770] pps_core: LinuxPPS API ver. 1 registered
[    0.347979] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357502] PTP clock support registered
[    0.361628] EDAC MC: Ver: 3.0.0
[    0.365618] Advanced Linux Sound Architecture Driver Initialized.
[    0.373147] clocksource: Switched to clocksource timer1
[    0.390347] NET: Registered protocol family 2
[    0.395662] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402933] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409600] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416315] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422419] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429122] NET: Registered protocol family 1
[    0.434023] RPC: Registered named UNIX socket transport module.
[    0.440203] RPC: Registered udp transport module.
[    0.445153] RPC: Registered tcp transport module.
[    0.450079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.457986] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.464950] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481674] NFS: Registering the id_resolver key type
[    0.487046] Key type id_resolver registered
[    0.491438] Key type id_legacy registered
[    0.497169] io scheduler noop registered
[    0.501300] io scheduler deadline registered
[    0.506023] io scheduler cfq registered (default)
[    0.512243] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592252] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603069] console [ttyS0] disabled
[    0.606918] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615840] console [ttyS0] enabled
[    0.615840] console [ttyS0] enabled
[    0.623012] bootconsole [earlycon0] disabled
[    0.623012] bootconsole [earlycon0] disabled
[    0.632727]   Reference Linux version 4.4.12
[    0.637046]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655551] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661422] cmemk initialized
[    0.671423] loop: module loaded
[    0.733198] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739329] libphy: 4a100800.mdio: probed
[    0.744139] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.752998] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762702] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792137] mousedev: PS/2 mouse device common for all mice
[    0.798195] omap_rtc 480c0000.rtc: already running
[    0.803394] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.810680] i2c /dev entries driver
[    0.815079] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.822150] sdhci: Secure Digital Host Controller Interface driver
[    0.828381] sdhci: Copyright(c) Pierre Ossman
[    0.958475] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.977439] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.983666] mmc0: new high speed SDIO card at address 0001
[    0.993355] Synopsys Designware Multimedia Card Interface Driver
[    0.999801] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.006754] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.018025] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.025323] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.032803] NET: Registered protocol family 10
[    1.039534] sit: IPv6 over IPv4 tunneling driver
[    1.045004] NET: Registered protocol family 17
[    1.049695] Key type dns_resolver registered
[    1.054244] omap_voltage_late_init: Could not get sys clk.
[    1.060054] Power Management for TI81XX.
[    1.069233] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.074466] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.081845] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.088302] nand: Micron MT29F2G16ABAEAWP
[    1.092334] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.099970] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.105393] 8 ofpart partitions found on MTD device 8000000.nand
[    1.111427] Creating 8 MTD partitions on "8000000.nand":
[    1.116785] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.124345] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.134404] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.141382] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.150149] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.163173] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.183219] mmc1: new high speed SDHC card at address 0007
[    1.203192] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.208980]  mmcblk0: p1 p2
[    1.249300] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.256566] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.267273] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.289786] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.296848] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.303594] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.310529] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.319768] omap_rtc 480c0000.rtc: setting system clock to 2016-12-05 07:39:48 UTC (1480923588)
[    1.341577] wlan-en-regulator: disabling
[    1.345886] ALSA device list:
[    1.348871]   #0: TI81XX-CSK
[    1.353804] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    1.532605] EXT4-fs (mmcblk0p2): recovery complete
[    1.545227] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.553427] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    1.568067] devtmpfs: mounted
[    1.571638] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    1.578042] This architecture does not have kernel memory protection.
[    1.851846] random: systemd urandom read with 14 bits of entropy available
[    1.870790] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.889463] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    1.914457] systemd[1]: Set hostname to <ti81xx>.
[    2.160522] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.279148] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.306851] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.324429] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.344332] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.363517] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.383365] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.403528] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.423353] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    2.461826] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.493645] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.528800] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    2.557717] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    2.607583] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    2.670581] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    2.713796] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    2.743586] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    2.763659] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.787016] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.832197] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    2.868334] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    2.893984] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.933725] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    2.963494] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.987107] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    3.027129] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    3.087759] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    3.123564] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    3.143459] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    3.163481] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    3.183903] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Synchronize System and HW clocks.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting uim-sysfs.service...
[    4.257371] autorun-usecase.sh[113]: numid=1,iface=MIXER,name='PCM Playback Volume'
[  OK  ] Started System Logging Service.
[  OK  ] Started Kernel Logging Service.
[    4.291775] autorun-usecase.sh[113]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[    4.321661] autorun-usecase.sh[113]:   : values=115,115
[    4.341938] autorun-usecase.sh[113]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[    4.408869] autorun-usecase.sh[113]: numid=31,iface=MIXER,name='PGA Capture Volume'
[  OK  ] Reached target Login Prompts.
[    4.452434] autorun-usecase.sh[113]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    4.476661] autorun-usecase.sh[113]:   : values=72,72
[    4.477973] autorun-usecase.sh[113]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[  OK  ] Started D-Bus System Message Bus.
[    4.499198] autorun-usecase.sh[113]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[    4.541779] autorun-usecase.sh[113]:   ; type=BOOLEAN,access=rw------,values=1
[    4.561766] autorun-usecase.sh[113]:   : values=on
[    4.590086] autorun-usecase.sh[113]: numid=46,iface=MIXER,name='Left PGA Mixer Mic2L Switch'
[    4.611758] autorun-usecase.sh[113]:   ; type=BOOLEAN,access=rw------,values=1
[    4.631792] autorun-usecase.sh[113]:   : values=on
[    4.664136] autorun-usecase.sh[113]: Mount mtd6 and mtd7 partitions
[    4.696640] ubi0: attaching mtd6
         Starting Network Service...
[    4.891290] ubi0: scanning is finished
[    4.952726] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    4.958744] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.965675] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    4.972407] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.979415] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    4.985377] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.992634] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    5.001822] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    5.011486] ubi0: background thread "ubi_bgt0d" started, PID 146
[    5.060517] net eth0: initializing cpsw version 1.10 (0)
[    5.065925] net eth0: initialized cpsw ale version 1.3
[    5.074346] net eth0: phy found : id is : 0x2000a231
[    5.079384] libphy: PHY  not found
[    5.082805] net eth0: phy "" not found on slave 1, err -19
[  OK  ] Started Network Service.
[    5.188119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.262839] autorun-usecase.sh[113]: UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    5.873193] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 151
[    5.922124] UBIFS (ubi0:0): recovery needed
[    6.081293] UBIFS (ubi0:0): recovery completed
[    6.085906] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    6.093895] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.103876] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    6.114026] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    6.120504] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started uim-sysfs.service.
         Starting telnetd.service...
[    6.922710] ubi1: attaching mtd7
[  OK  ] Started telnetd.service.
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[    7.216314] ubi1: scanning is finished
[    7.238411] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    7.244780] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.251687] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    7.258446] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.265456] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    7.271490] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.278761] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    7.287950] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    7.301070] ubi1: background thread "ubi_bgt1d" started, PID 172
[    7.372847] autorun-usecase.sh[113]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[  OK  ] Reached target Multi-User System.
[    7.923312] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 181
[    7.946536] UBIFS (ubi1:0): recovery needed
[    7.965550] UBIFS (ubi1:0): recovery completed
[    7.970116] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    7.978112] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.988095] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.998594] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    8.005262] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

[    8.522557] autorun-usecase.sh[113]: wifi: in STA mode
ti81xx login: [    9.074157] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.082965] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.299834] cfg80211: World regulatory domain updated:
[    9.305091] cfg80211:  DFS Master region: unset
[    9.309470] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.319296] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.327356] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.335414] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.343473] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.353001] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.362541] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.370685] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.378740] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.083962] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   10.473856] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   10.504124] wlcore: loaded
[   11.093642] wlcore: PHY firmware version: Rev 8.2.0.0.232
[   11.206175] wlcore: firmware booted (Rev 8.9.0.0.48)
[   11.223916] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.541501] random: nonblocking pool is initialized
[   15.321634] autorun-usecase.sh[113]:     SSID: dlink6
[   15.323217] autorun-usecase.sh[113]:     SSID: DIRECT-f7-HP M132f LaserJet
[   15.324417] autorun-usecase.sh[113]:     SSID: MF90PLUS_A5B0DD

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000013] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008259] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017834] OMAP clocksource: timer1 at 20000000 Hz
[    0.023124] Console: colour dummy device 80x30
[    0.027819] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086965] pid_max: default: 32768 minimum: 301
[    0.091915] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098825] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106858] Initializing cgroup subsys io
[    0.111087] Initializing cgroup subsys memory
[    0.115700] Initializing cgroup subsys devices
[    0.120371] Initializing cgroup subsys freezer
[    0.125049] Initializing cgroup subsys pids
[    0.129458] CPU: Testing write buffer coherency: ok
[    0.134896] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142650] devtmpfs: initialized
[    0.167982] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215847] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227949] pinctrl core: initialized pinctrl subsystem
[    0.234681] NET: Registered protocol family 16
[    0.240848] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253444] OMAP GPIO hardware version 0.1
[    0.265575] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298324] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305841] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319415] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333065] media: Linux media interface: v0.10
[    0.337898] Linux video capture interface: v2.00
[    0.342781] pps_core: LinuxPPS API ver. 1 registered
[    0.347990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357511] PTP clock support registered
[    0.361637] EDAC MC: Ver: 3.0.0
[    0.365633] Advanced Linux Sound Architecture Driver Initialized.
[    0.373158] clocksource: Switched to clocksource timer1
[    0.390354] NET: Registered protocol family 2
[    0.395672] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402942] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409609] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416320] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422423] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429126] NET: Registered protocol family 1
[    0.434030] RPC: Registered named UNIX socket transport module.
[    0.440210] RPC: Registered udp transport module.
[    0.445159] RPC: Registered tcp transport module.
[    0.450085] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.457999] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.464965] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481675] NFS: Registering the id_resolver key type
[    0.487047] Key type id_resolver registered
[    0.491439] Key type id_legacy registered
[    0.497175] io scheduler noop registered
[    0.501306] io scheduler deadline registered
[    0.506030] io scheduler cfq registered (default)
[    0.512247] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592304] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603123] console [ttyS0] disabled
[    0.606975] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615897] console [ttyS0] enabled
[    0.615897] console [ttyS0] enabled
[    0.623069] bootconsole [earlycon0] disabled
[    0.623069] bootconsole [earlycon0] disabled
[    0.632791]   Reference Linux version 4.4.12
[    0.637109]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655621] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661491] cmemk initialized
[    0.671478] loop: module loaded
[    0.733207] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739336] libphy: 4a100800.mdio: probed
[    0.744187] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.753050] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762749] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792173] mousedev: PS/2 mouse device common for all mice
[    0.798226] omap_rtc 480c0000.rtc: already running
[    0.803418] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.810701] i2c /dev entries driver
[    0.815114] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.822182] sdhci: Secure Digital Host Controller Interface driver
[    0.828414] sdhci: Copyright(c) Pierre Ossman
[    0.958492] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.977444] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.983669] mmc0: new high speed SDIO card at address 0001
[    0.993367] Synopsys Designware Multimedia Card Interface Driver
[    0.999814] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.006760] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.018038] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.025338] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.032814] NET: Registered protocol family 10
[    1.039550] sit: IPv6 over IPv4 tunneling driver
[    1.045023] NET: Registered protocol family 17
[    1.049735] Key type dns_resolver registered
[    1.054283] omap_voltage_late_init: Could not get sys clk.
[    1.060090] Power Management for TI81XX.
[    1.069287] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.074520] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.081896] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.088355] nand: Micron MT29F2G16ABAEAWP
[    1.092388] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.100023] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.105447] 8 ofpart partitions found on MTD device 8000000.nand
[    1.111480] Creating 8 MTD partitions on "8000000.nand":
[    1.116838] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.124394] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.134454] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.141432] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.150186] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.163209] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.183234] mmc1: new high speed SDHC card at address 0007
[    1.203203] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.209003]  mmcblk0: p1 p2
[    1.249162] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.256429] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.267126] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.289622] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.296684] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.303431] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.310368] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.319605] omap_rtc 480c0000.rtc: setting system clock to 2016-12-05 07:40:09 UTC (1480923609)
[    1.341415] wlan-en-regulator: disabling
[    1.345722] ALSA device list:
[    1.348707]   #0: TI81XX-CSK
[    1.353646] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    1.510415] EXT4-fs (mmcblk0p2): recovery complete
[    1.523038] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.531237] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    1.545853] devtmpfs: mounted
[    1.549424] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    1.555828] This architecture does not have kernel memory protection.
[    1.829225] random: systemd urandom read with 14 bits of entropy available
[    1.847933] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.866613] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    1.894476] systemd[1]: Set hostname to <ti81xx>.
[    2.140633] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.259285] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.283432] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    2.303613] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.323545] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    2.353597] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.373376] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.393457] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.413488] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.433366] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    2.456855] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.476687] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    2.537212] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    2.584037] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    2.627066] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    2.682501] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    2.703559] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.756176] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    2.775191] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.803686] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.824531] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.846824] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.915550] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    2.943839] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    2.973782] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.990117] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    3.046854] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    3.093637] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    3.123594] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    3.143489] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    3.164159] systemd[1]: Started udev Kernel Device Manager.
[  OK  ] Started udev Kernel Device Manager.
[    3.183920] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started Synchronize System and HW clocks.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Getty on tty1.
[    4.216121] autorun-usecase.sh[112]: numid=1,iface=MIXER,name='PCM Playback Volume'
[    4.236770] autorun-usecase.sh[112]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[    4.238070] autorun-usecase.sh[112]:   : values=115,115
[    4.239174] autorun-usecase.sh[112]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[  OK  ] Started Serial Getty on ttyS0.
[    4.249968] autorun-usecase.sh[112]: numid=31,iface=MIXER,name='PGA Capture Volume'
[    4.282816] autorun-usecase.sh[112]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    4.284078] autorun-usecase.sh[112]:   : values=72,72
[    4.285181] autorun-usecase.sh[112]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[    4.287565] autorun-usecase.sh[112]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[    4.288720] autorun-usecase.sh[112]:   ; type=BOOLEAN,access=rw------,values=1
[    4.289822] autorun-usecase.sh[112]:   : values=on
[  OK  ] Reached target Login Prompts.
[    4.303225] autorun-usecase.sh[112]: numid=46,iface=MIXER,name='Left PGA Mix[    4.373499] ubi0: attaching mtd6
er Mic2L Switch'
[    4.356338] autorun-usecase.sh[112]:   ; type=BOOLEAN,access=rw------,values=1
[    4.357503] autorun-usecase.sh[112]:   : values=on
[    4.358851] autorun-usecase.sh[112]: Mount mtd6 and mtd7 partitions
[  OK  ] Started Kernel Logging Service.
[  OK  ] Started D-Bus System Message Bus.
[    4.525996] ubi0: scanning is finished
[    4.552434] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    4.558452] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.565400] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    4.572133] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.579149] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    4.585112] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.592369] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    4.601556] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    4.611383] ubi0: background thread "ubi_bgt0d" started, PID 132
         Starting uim-sysfs.service...
[  OK  ] Started System Logging Service.
         Starting Network Service...
[    4.826489] autorun-usecase.sh[112]: UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    4.953979] net eth0: initializing cpsw version 1.10 (0)
[    4.959339] net eth0: initialized cpsw ale version 1.3
[    4.967856] net eth0: phy found : id is : 0x2000a231
[    4.972895] libphy: PHY  not found
[    4.976340] net eth0: phy "" not found on slave 1, err -19
[  OK  ] Started Network Service.
[    5.087803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.423348] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 150
[    5.492299] UBIFS (ubi0:0): recovery needed
[    5.681662] UBIFS (ubi0:0): recovery completed
[    5.686276] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    5.694272] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.704254] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    5.714404] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    5.720881] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[    6.447061] ubi1: attaching mtd7
[    6.710716] ubi1: scanning is finished
[    6.739593] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    6.745962] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    6.752870] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    6.759627] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    6.766643] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    6.772677] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    6.779950] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    6.789136] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    6.802282] ubi1: background thread "ubi_bgt1d" started, PID 161
[    6.879871] autorun-usecase.sh[112]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[  OK  ] Started uim-sysfs.service.
         Starting telnetd.service...
[  OK  ] Started telnetd.service.
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[  OK  ] Reached target Multi-User System.
[    7.493217] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 180
[    7.529813] UBIFS (ubi1:0): recovery needed
[    7.568112] UBIFS (ubi1:0): recovery completed
[    7.572679] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    7.580684] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.590665] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.601163] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    7.607829] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model
[    8.153468] autorun-usecase.sh[112]: wifi: in STA mode

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login: [    8.907111] cfg80211: World regulatory domain updated:
[    8.912337] cfg80211:  DFS Master region: unset
[    8.916756] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.926571] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.934630] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.942680] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.950742] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.960285] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.969835] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.977978] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.986036] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    8.999187] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.017030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.713366] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   10.103787] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   10.129870] wlcore: loaded
[   10.723829] wlcore: PHY firmware version: Rev 8.2.0.0.232
[   10.836306] wlcore: firmware booted (Rev 8.9.0.0.48)
[   10.853136] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.392159] random: nonblocking pool is initialized
[   14.975177] autorun-usecase.sh[112]:     SSID: dlink6
[   14.978009] autorun-usecase.sh[112]:     SSID: DIRECT-f7-HP M132f LaserJet
[   14.989477] autorun-usecase.sh[112]:     SSID: MF90PLUS_A5B0DD

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000013] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008260] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017836] OMAP clocksource: timer1 at 20000000 Hz
[    0.023126] Console: colour dummy device 80x30
[    0.027823] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086965] pid_max: default: 32768 minimum: 301
[    0.091915] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098825] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106857] Initializing cgroup subsys io
[    0.111087] Initializing cgroup subsys memory
[    0.115702] Initializing cgroup subsys devices
[    0.120374] Initializing cgroup subsys freezer
[    0.125052] Initializing cgroup subsys pids
[    0.129462] CPU: Testing write buffer coherency: ok
[    0.134896] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142651] devtmpfs: initialized
[    0.167978] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215863] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227970] pinctrl core: initialized pinctrl subsystem
[    0.234698] NET: Registered protocol family 16
[    0.240866] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253451] OMAP GPIO hardware version 0.1
[    0.265588] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298338] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305871] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319448] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333099] media: Linux media interface: v0.10
[    0.337928] Linux video capture interface: v2.00
[    0.342811] pps_core: LinuxPPS API ver. 1 registered
[    0.348019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357541] PTP clock support registered
[    0.361668] EDAC MC: Ver: 3.0.0
[    0.365664] Advanced Linux Sound Architecture Driver Initialized.
[    0.373197] clocksource: Switched to clocksource timer1
[    0.390404] NET: Registered protocol family 2
[    0.395719] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402989] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409658] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416374] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422477] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429180] NET: Registered protocol family 1
[    0.434076] RPC: Registered named UNIX socket transport module.
[    0.440256] RPC: Registered udp transport module.
[    0.445206] RPC: Registered tcp transport module.
[    0.450131] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.458043] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.465006] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481730] NFS: Registering the id_resolver key type
[    0.487099] Key type id_resolver registered
[    0.491490] Key type id_legacy registered
[    0.497213] io scheduler noop registered
[    0.501343] io scheduler deadline registered
[    0.506069] io scheduler cfq registered (default)
[    0.512291] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592330] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603148] console [ttyS0] disabled
[    0.606999] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615921] console [ttyS0] enabled
[    0.615921] console [ttyS0] enabled
[    0.623093] bootconsole [earlycon0] disabled
[    0.623093] bootconsole [earlycon0] disabled
[    0.632816]   Reference Linux version 4.4.12
[    0.637136]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655644] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661517] cmemk initialized
[    0.671520] loop: module loaded
[    0.733246] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739376] libphy: 4a100800.mdio: probed
[    0.744183] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.753039] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762738] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792148] mousedev: PS/2 mouse device common for all mice
[    0.798210] omap_rtc 480c0000.rtc: already running
[    0.803409] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.810695] i2c /dev entries driver
[    0.815100] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.822167] sdhci: Secure Digital Host Controller Interface driver
[    0.828399] sdhci: Copyright(c) Pierre Ossman
[    0.958519] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.977489] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.983720] mmc0: new high speed SDIO card at address 0001
[    0.993407] Synopsys Designware Multimedia Card Interface Driver
[    0.999855] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.006798] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.018079] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.025378] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.032854] NET: Registered protocol family 10
[    1.039589] sit: IPv6 over IPv4 tunneling driver
[    1.045057] NET: Registered protocol family 17
[    1.049747] Key type dns_resolver registered
[    1.054292] omap_voltage_late_init: Could not get sys clk.
[    1.060105] Power Management for TI81XX.
[    1.069281] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.074513] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.081893] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.088350] nand: Micron MT29F2G16ABAEAWP
[    1.092383] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.100018] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.105442] 8 ofpart partitions found on MTD device 8000000.nand
[    1.111476] Creating 8 MTD partitions on "8000000.nand":
[    1.116834] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.124395] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.134452] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.141432] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.150192] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.163220] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.183269] mmc1: new high speed SDHC card at address 0007
[    1.203240] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.209024]  mmcblk0: p1 p2
[    1.249137] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.256403] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.267078] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.289601] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.296665] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.303409] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.310345] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.319589] omap_rtc 480c0000.rtc: setting system clock to 2016-12-05 07:40:29 UTC (1480923629)
[    1.341398] wlan-en-regulator: disabling
[    1.345706] ALSA device list:
[    1.348691]   #0: TI81XX-CSK
[    1.353627] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    1.510077] EXT4-fs (mmcblk0p2): recovery complete
[    1.522701] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.530900] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    1.545513] devtmpfs: mounted
[    1.549084] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    1.555489] This architecture does not have kernel memory protection.
[    1.828894] random: systemd urandom read with 14 bits of entropy available
[    1.847753] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.866442] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    1.894513] systemd[1]: Set hostname to <ti81xx>.
[    2.140177] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.258752] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.283672] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.303663] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    2.333403] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    2.353627] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.373428] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    2.396873] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.414466] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.440654] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    2.486573] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    2.527153] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    2.563633] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.583437] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.620952] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.653461] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    2.674602] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.696697] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    2.723704] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    2.765895] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.787888] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.813633] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.836894] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    2.867640] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.926937] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    2.962590] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    3.030508] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    3.054738] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    3.093654] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    3.113671] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    3.134293] systemd[1]: Started udev Kernel Device Manager.
[  OK  ] Started udev Kernel Device Manager.
[    3.156688] systemd[1]: Started Synchronize System and HW clocks.
[  OK  ] Started Synchronize System and HW clocks.
[    3.189223] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Getty on tty1.
[    4.198316] autorun-usecase.sh[111]: numid=1,iface=MIXER,name='PCM Playback Volume'
         Starting uim-sysfs.service...
[    4.221762] autorun-usecase.sh[111]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[  OK  ] Started System Logging Service.
[  OK  ] Started D-Bus System Message Bus.
[    4.251755] autorun-usecase.sh[111]:   : values=115,115
[    4.281665] autorun-usecase.sh[111]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[    4.301743] autorun-usecase.sh[111]: numid=31,iface=MIXER,name='PGA Capture Volume'
[    4.321691] autorun-usecase.sh[111]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    4.341839] autorun-usecase.sh[111]:   : values=72,72
[    4.362950] autorun-usecase.sh[111]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[    4.407798] autorun-usecase.sh[111]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[    4.431851] autorun-usecase.sh[111]:   ; type=BOOLEAN,access=rw------,values=1
[    4.454577] autorun-usecase.sh[111]:   : values=on
[    4.478231] autorun-usecase.sh[111]: numid=46,iface=MIXER,name='Left PGA Mixer Mic2L Switch'
[    4.501779] autorun-usecase.sh[111]:   ; type=BOOLEAN,access=rw------,values=1
[    4.521704] autorun-usecase.sh[111]:   : values=on
[    4.542374] autorun-usecase.sh[111]: Mount mtd6 and mtd7 partitions
         Starting Network Service...
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Kernel Logging Service.
[    4.687249] ubi0: attaching mtd6
[    4.774635] net eth0: initializing cpsw version 1.10 (0)
[    4.779994] net eth0: initialized cpsw ale version 1.3
[    4.788518] net eth0: phy found : id is : 0x2000a231
[    4.793581] libphy: PHY  not found
[    4.797004] net eth0: phy "" not found on slave 1, err -19
[  OK  ] Started Network Service.
[    4.882845] ubi0: scanning is finished
[    4.929519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.969527] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    4.975550] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.982457] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    4.989212] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.996222] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    5.002169] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    5.009440] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    5.018629] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    5.028288] ubi0: background thread "ubi_bgt0d" started, PID 145
[    5.226126] autorun-usecase.sh[111]: UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    5.863310] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 149
[    5.934649] UBIFS (ubi0:0): recovery needed
[  OK  ] Reached target Network.
[    6.059859] UBIFS (ubi0:0): recovery completed
[    6.064462] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    6.072420] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.082417] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    6.092569] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    6.099061] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started uim-sysfs.service.
         Starting telnetd.service...
[    6.914796] ubi1: attaching mtd7
[  OK  ] Started telnetd.service.
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[    7.169891] ubi1: scanning is finished
[    7.193523] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    7.199837] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.206779] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    7.213530] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.220523] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    7.226572] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.233845] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    7.243018] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    7.256097] ubi1: background thread "ubi_bgt1d" started, PID 170
[  OK  ] Reached target Multi-User System.
[    7.326863] autorun-usecase.sh[111]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    7.873291] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 178
[    7.899585] UBIFS (ubi1:0): recovery needed
[    7.918527] UBIFS (ubi1:0): recovery completed
[    7.923096] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    7.931105] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.941087] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.951586] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    7.958250] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login: [    8.473454] autorun-usecase.sh[111]: wifi: in STA mode
[    8.784171] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.801587] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.249932] cfg80211: World regulatory domain updated:
[    9.255196] cfg80211:  DFS Master region: unset
[    9.259575] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.269404] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.277466] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.285525] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.293584] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.303112] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.312652] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.320796] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.328851] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.043391] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   10.433845] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   10.464340] wlcore: loaded
[   11.053618] wlcore: PHY firmware version: Rev 8.2.0.0.232
[   11.166226] wlcore: firmware booted (Rev 8.9.0.0.48)
[   11.183344] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.842117] random: nonblocking pool is initialized
[   15.264064] autorun-usecase.sh[111]:     SSID: dlink6
[   15.265836] autorun-usecase.sh[111]:     SSID: DIRECT-f7-HP M132f LaserJet
[   15.277097] autorun-usecase.sh[111]:     SSID: MF90PLUS_A5B0DD

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000015] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008261] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017837] OMAP clocksource: timer1 at 20000000 Hz
[    0.023128] Console: colour dummy device 80x30
[    0.027824] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086962] pid_max: default: 32768 minimum: 301
[    0.091912] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098823] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106860] Initializing cgroup subsys io
[    0.111088] Initializing cgroup subsys memory
[    0.115702] Initializing cgroup subsys devices
[    0.120374] Initializing cgroup subsys freezer
[    0.125053] Initializing cgroup subsys pids
[    0.129462] CPU: Testing write buffer coherency: ok
[    0.134896] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142646] devtmpfs: initialized
[    0.167996] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227942] pinctrl core: initialized pinctrl subsystem
[    0.234681] NET: Registered protocol family 16
[    0.240853] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253444] OMAP GPIO hardware version 0.1
[    0.265594] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298342] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305865] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319442] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333091] media: Linux media interface: v0.10
[    0.337921] Linux video capture interface: v2.00
[    0.342805] pps_core: LinuxPPS API ver. 1 registered
[    0.348014] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357536] PTP clock support registered
[    0.361663] EDAC MC: Ver: 3.0.0
[    0.365654] Advanced Linux Sound Architecture Driver Initialized.
[    0.373179] clocksource: Switched to clocksource timer1
[    0.390385] NET: Registered protocol family 2
[    0.395706] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402977] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409645] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416357] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422460] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429162] NET: Registered protocol family 1
[    0.434063] RPC: Registered named UNIX socket transport module.
[    0.440242] RPC: Registered udp transport module.
[    0.445191] RPC: Registered tcp transport module.
[    0.450116] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.458022] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.464982] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481706] NFS: Registering the id_resolver key type
[    0.487074] Key type id_resolver registered
[    0.491467] Key type id_legacy registered
[    0.497211] io scheduler noop registered
[    0.501343] io scheduler deadline registered
[    0.506072] io scheduler cfq registered (default)
[    0.512292] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592349] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603162] console [ttyS0] disabled
[    0.607011] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615932] console [ttyS0] enabled
[    0.615932] console [ttyS0] enabled
[    0.623103] bootconsole [earlycon0] disabled
[    0.623103] bootconsole [earlycon0] disabled
[    0.632819]   Reference Linux version 4.4.12
[    0.637137]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655645] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661516] cmemk initialized
[    0.671520] loop: module loaded
[    0.733229] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739359] libphy: 4a100800.mdio: probed
[    0.744188] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.753053] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762753] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792175] mousedev: PS/2 mouse device common for all mice
[    0.798232] omap_rtc 480c0000.rtc: already running
[    0.803428] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.810716] i2c /dev entries driver
[    0.815129] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.822194] sdhci: Secure Digital Host Controller Interface driver
[    0.828426] sdhci: Copyright(c) Pierre Ossman
[    0.958509] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.977470] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.983693] mmc0: new high speed SDIO card at address 0001
[    0.993384] Synopsys Designware Multimedia Card Interface Driver
[    0.999830] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.006775] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.018051] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.025351] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.032827] NET: Registered protocol family 10
[    1.039564] sit: IPv6 over IPv4 tunneling driver
[    1.045032] NET: Registered protocol family 17
[    1.049726] Key type dns_resolver registered
[    1.054273] omap_voltage_late_init: Could not get sys clk.
[    1.060083] Power Management for TI81XX.
[    1.069257] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.074488] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.081869] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.088330] nand: Micron MT29F2G16ABAEAWP
[    1.092362] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.099998] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.105422] 8 ofpart partitions found on MTD device 8000000.nand
[    1.111456] Creating 8 MTD partitions on "8000000.nand":
[    1.116814] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.124377] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.134436] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.141417] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.150176] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.163214] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.183253] mmc1: new high speed SDHC card at address 0007
[    1.203230] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.209018]  mmcblk0: p1 p2
[    1.248947] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.256214] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.266906] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.289382] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.296444] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.303149] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.310135] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.319386] omap_rtc 480c0000.rtc: setting system clock to 2016-12-05 07:40:49 UTC (1480923649)
[    1.341197] wlan-en-regulator: disabling
[    1.345502] ALSA device list:
[    1.348487]   #0: TI81XX-CSK
[    1.353423] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    1.510305] EXT4-fs (mmcblk0p2): recovery complete
[    1.522930] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.531127] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    1.545735] devtmpfs: mounted
[    1.549306] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    1.555710] This architecture does not have kernel memory protection.
[    1.829156] random: systemd urandom read with 14 bits of entropy available
[    1.847856] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.866530] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    1.894504] systemd[1]: Set hostname to <ti81xx>.
[    2.141688] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.259847] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    2.283667] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.303399] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.323612] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.343555] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    2.373622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    2.406875] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.428479] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    2.455381] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.506080] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    2.545756] systemd[1]: Mounting Temporary Directory...

         Mounting Temporary Directory...
[    2.583514] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.610665] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    2.647090] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    2.685195] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.730866] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.753593] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.776942] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.803783] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.831109] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    2.853983] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.877815] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    2.903991] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.937783] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    2.976871] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    3.031240] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    3.093619] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    3.123571] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    3.143491] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    3.164170] systemd[1]: Started udev Kernel Device Manager.
[  OK  ] Started udev Kernel Device Manager.
[    3.183924] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started Synchronize System and HW clocks.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started System Logging Service.
[    4.218365] autorun-usecase.sh[112]: numid=1,iface=MIXER,name='PCM Playback Volume'
[    4.236783] autorun-usecase.sh[112]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[    4.238078] autorun-usecase.sh[112]:   : values=115,115
[    4.239178] autorun-usecase.sh[112]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[  OK  ] Started Serial Getty on ttyS0.
[    4.267592] autorun-usecase.sh[112]: numid=31,iface=MIXER,name='PGA Capture Volume'
[    4.286596] autorun-usecase.sh[112]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    4.287963] autorun-usecase.sh[112]:   : values=72,72
[    4.295449] autorun-usecase.sh[112]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[  OK  ] Started Kernel Logging Service.
[    4.311717] autorun-usecase.sh[112]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[    4.336614] autorun-usecase.sh[112]:   ; type=BOOLEAN,access=rw------,values=1
[    4.337905] autorun-usecase.sh[112]:   : values=on
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[    4.385208] autorun-usecase.sh[112]: numid=46,iface=MIXER,name='Left PGA Mixer Mic2L Switch'
[    4.396459] autorun-usecase.sh[112]:   ; type=BOOLEAN,access=rw------,values=1
[    4.397745] autorun-usecase.sh[112]:   : values=on
[  OK  ] Started D-Bus System Message Bus.
[    4.420612] autorun-usecase.sh[112]: Mount mtd6 and mtd7 partitions
[    4.515214] ubi0: attaching mtd6
[    4.623667] ubi0: scanning is finished
         Starting Network Service...
[    4.678112] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    4.684133] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.691041] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    4.697796] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.704805] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    4.710752] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.718028] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    4.727217] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    4.736883] ubi0: background thread "ubi_bgt0d" started, PID 137
         Starting uim-sysfs.service...
[    4.921738] net eth0: initializing cpsw version 1.10 (0)
[    4.927150] net eth0: initialized cpsw ale version 1.3
[    4.935617] net eth0: phy found : id is : 0x2000a231
[    4.940653] libphy: PHY  not found
[    4.944098] net eth0: phy "" not found on slave 1, err -19
[  OK  ] Started Network Service.
[    5.030063] autorun-usecase.sh[112]: UBI device number 0, total 96 LEBs (121[    5.048812] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
89696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    5.623304] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 150
[    5.687522] UBIFS (ubi0:0): recovery needed
[    5.819778] UBIFS (ubi0:0): recovery completed
[    5.824392] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    5.832350] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.842344] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    5.852496] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    5.858988] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[    6.608657] ubi1: attaching mtd7
[    6.875193] ubi1: scanning is finished
[    6.908978] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    6.915341] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    6.922248] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    6.929006] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    6.936025] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    6.942060] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    6.949335] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    6.958524] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    6.972435] ubi1: background thread "ubi_bgt1d" started, PID 161
[  OK  ] Started uim-sysfs.service.
[    7.055456] autorun-usecase.sh[112]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
         Starting telnetd.service...
[  OK  ] Started telnetd.service.
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[  OK  ] Reached target Multi-User System.
[    7.603340] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 180
[    7.628419] UBIFS (ubi1:0): recovery needed
[    7.647417] UBIFS (ubi1:0): recovery completed
[    7.651980] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    7.659982] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.669963] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.680462] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    7.687125] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model
[    8.203480] autorun-usecase.sh[112]: wifi: in STA mode

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   | [    8.965784] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __| [    8.979930] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

[    9.149754] cfg80211: World regulatory domain updated:
[    9.155004] cfg80211:  DFS Master region: unset
[    9.159382] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.169206] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.177265] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.185323] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.193382] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.202910] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.212451] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.220594] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.228650] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login:
 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

ti81xx login: roo[    9.833620] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
t
root@ti81xx:~# [   10.223870] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   10.254408] wlcore: loaded

root@ti81xx:~# [   10.813517] wlcore: PHY firmware version: Rev 8.2.0.0.232

[   10.916524] wlcore: firmware booted (Rev 8.9.0.0.48)
root@ti81xx:~# [   10.928164] random: nonblocking pool is initialized
[   10.940073] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~# [   15.015185] autorun-usecase.sh[112]:     SSID: dlink6
[   15.016787] autorun-usecase.sh[112]:     SSID: MF90PLUS_A5B0DD

root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#
root@ti81xx:~#

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 0
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK#
DM8127-CSK# reset
resetting ...

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 2 1 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
Booting from mmc ...
reading uImage
2666240 bytes read in 295 ms (8.6 MiB/s)
reading dm8127-csk.dtb
57759 bytes read in 14 ms (3.9 MiB/s)
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-4.4.12-dirty
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2666176 Bytes = 2.5 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   Loading Kernel Image ... OK
   Loading Device Tree to 8146e000, end 8147f19e ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.12-dirty (gtbldadm@ubuntu-16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 Tue Apr 25 10:30:11 EDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: DM8127 CSK
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] omap_barrier_reserve_memblock():Reserving DRAM area @ addr = 0x84e00000         size = 1048576 Bytes
[    0.000000] cma: Reserved 24 MiB at 0x83400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] TI81XX: Map 0x84e00000 to 0xfe500000 for dram barrier
[    0.000000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] TI814X ES2.1 (iva neon )
[    0.000000] powerdomain: gem_pwrdm: voltagedomain dsp does not exist
[    0.000000] powerdomain: ivahd_pwrdm: voltagedomain iva does not exist
[    0.000000] powerdomain: hdvpss_pwrdm: voltagedomain dsp does not exist
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 19788
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw mem=80M vram=4M cmemk.phys_start=0x85000000 cmemk.phys_end=0x89000000 cmemk.allowOverlap=1 notifyk.vpssm3_sva=0xBFD00000 earlyprintk
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 46652K/79872K available (4915K kernel code, 261K rwdata, 1708K rodata, 272K init, 241K bss, 8644K reserved, 24576K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc5800000 - 0xff800000   ( 928 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc5000000   (  80 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc067ffa4   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06c4000   ( 272 kB)
[    0.000000]       .data : 0xc06c4000 - 0xc07054c8   ( 262 kB)
[    0.000000]        .bss : 0xc07054c8 - 0xc0741950   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 20000000 Hz
[    0.000015] sched_clock: 32 bits at 20MHz, resolution 50ns, wraps every 107374182375ns
[    0.008261] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 95563022313 ns
[    0.017836] OMAP clocksource: timer1 at 20000000 Hz
[    0.023128] Console: colour dummy device 80x30
[    0.027825] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[    0.086967] pid_max: default: 32768 minimum: 301
[    0.091917] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.098827] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106857] Initializing cgroup subsys io
[    0.111086] Initializing cgroup subsys memory
[    0.115699] Initializing cgroup subsys devices
[    0.120371] Initializing cgroup subsys freezer
[    0.125050] Initializing cgroup subsys pids
[    0.129460] CPU: Testing write buffer coherency: ok
[    0.134894] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.142641] devtmpfs: initialized
[    0.167988] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.215848] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.227949] pinctrl core: initialized pinctrl subsystem
[    0.234677] NET: Registered protocol family 16
[    0.240846] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253447] OMAP GPIO hardware version 0.1
[    0.265586] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/nandflash_pins_s0, deferring probe
[    0.298305] edma 49000000.edma: TI EDMA DMA engine driver
[    0.305824] omap_i2c 48028000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    0.319399] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4ls@48000000/control@140000/pinmux@800/pinmux_i2c1_pins, deferring probe
[    0.333048] media: Linux media interface: v0.10
[    0.337879] Linux video capture interface: v2.00
[    0.342761] pps_core: LinuxPPS API ver. 1 registered
[    0.347970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.357492] PTP clock support registered
[    0.361618] EDAC MC: Ver: 3.0.0
[    0.365610] Advanced Linux Sound Architecture Driver Initialized.
[    0.373138] clocksource: Switched to clocksource timer1
[    0.390319] NET: Registered protocol family 2
[    0.395636] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.402907] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.409575] TCP: Hash tables configured (established 1024 bind 1024)
[    0.416289] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.422392] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.429096] NET: Registered protocol family 1
[    0.433998] RPC: Registered named UNIX socket transport module.
[    0.440178] RPC: Registered udp transport module.
[    0.445130] RPC: Registered tcp transport module.
[    0.450056] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.457963] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.464929] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.481652] NFS: Registering the id_resolver key type
[    0.487019] Key type id_resolver registered
[    0.491410] Key type id_legacy registered
[    0.497154] io scheduler noop registered
[    0.501285] io scheduler deadline registered
[    0.506011] io scheduler cfq registered (default)
[    0.512235] pinctrl-single 48140800.pinmux: 270 pins at pa fa140800 size 1080
[    0.592300] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.603108] console [ttyS0] disabled
[    0.606956] 48020000.uart: ttyS0 at MMIO 0x48020000 (irq = 21, base_baud = 3000000) is a 8250
[    0.615877] console [ttyS0] enabled
[    0.615877] console [ttyS0] enabled
[    0.623050] bootconsole [earlycon0] disabled
[    0.623050] bootconsole [earlycon0] disabled
[    0.632770]   Reference Linux version 4.4.12
[    0.637088]   File /home/gtbldadm/nightlybuilds/ipnc_rdk/utils/package-script/TI_GIT/NEWDIR/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[    0.655595] allocated heap buffer 0xc8000000 of size 0x4000000
[    0.661467] cmemk initialized
[    0.671465] loop: module loaded
[    0.733187] davinci_mdio 4a100800.mdio: davinci mdio revision 1.6
[    0.739318] libphy: 4a100800.mdio: probed
[    0.744137] davinci_mdio 4a100800.mdio: phy[25]: device 4a100800.mdio:19, driver TI DP83867
[    0.752997] cpsw 4a100000.ethernet: Detected MACID = d4:f5:13:99:2e:54
[    0.762685] 47401300.usb-phy supply vcc not found, using dummy regulator
[    0.792115] mousedev: PS/2 mouse device common for all mice
[    0.798175] omap_rtc 480c0000.rtc: already running
[    0.803368] omap_rtc 480c0000.rtc: rtc core: registered 480c0000.rtc as rtc0
[    0.810655] i2c /dev entries driver
[    0.815055] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[    0.822124] sdhci: Secure Digital Host Controller Interface driver
[    0.828356] sdhci: Copyright(c) Pierre Ossman
[    0.958464] omap_hsmmc 48060000.mmc: card claims to support voltages below defined range
[    0.977425] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    0.983661] mmc0: new high speed SDIO card at address 0001
[    0.993340] Synopsys Designware Multimedia Card Interface Driver
[    0.999788] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.006723] notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbfd00000
[    1.018003] davinci_evm sound: ASoC: CODEC DAI tlv320aic3x-hifi not registered
[    1.025303] davinci_evm sound: snd_soc_register_card failed (-517)
[    1.032785] NET: Registered protocol family 10
[    1.039525] sit: IPv6 over IPv4 tunneling driver
[    1.044997] NET: Registered protocol family 17
[    1.049699] Key type dns_resolver registered
[    1.054245] omap_voltage_late_init: Could not get sys clk.
[    1.060059] Power Management for TI81XX.
[    1.069294] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.074526] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.081908] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xca
[    1.088339] nand: Micron MT29F2G16ABAEAWP
[    1.092370] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.100006] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.105430] 8 ofpart partitions found on MTD device 8000000.nand
[    1.111465] Creating 8 MTD partitions on "8000000.nand":
[    1.116823] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.126392] 0x000000020000-0x000000420000 : "NAND.u-boot"
[    1.134410] 0x000000420000-0x000000440000 : "NAND.u-boot-env"
[    1.141355] 0x000000440000-0x000000a40000 : "NAND.kernel"
[    1.150119] 0x000000a40000-0x00000ca40000 : "NAND.file-system"
[    1.163159] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.183210] mmc1: new high speed SDHC card at address 0007
[    1.203187] mmcblk0: mmc1:0007 SD16G 14.5 GiB
[    1.208986]  mmcblk0: p1 p2
[    1.249230] 0x00000ca40000-0x00000ca80000 : "NAND.u-boot-spl-os"
[    1.256505] 0x00000ca80000-0x00000d680000 : "NAND.data"
[    1.267190] 0x00000d680000-0x000010000000 : "NAND.reserved"
[    1.289704] omap_i2c 48028000.i2c: bus 0 rev0.11 at 400 kHz
[    1.296772] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    1.303516] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[    1.310452] davinci_evm sound: tlv320aic3x-hifi <-> 48050000.mcasp mapping ok
[    1.319696] omap_rtc 480c0000.rtc: setting system clock to 2016-12-05 07:41:16 UTC (1480923676)
[    1.341511] wlan-en-regulator: disabling
[    1.345816] ALSA device list:
[    1.348802]   #0: TI81XX-CSK
[    1.353747] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[    1.515011] EXT4-fs (mmcblk0p2): recovery complete
[    1.527607] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.535811] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    1.550435] devtmpfs: mounted
[    1.554027] Freeing unused kernel memory: 272K (c0680000 - c06c4000)
[    1.560409] This architecture does not have kernel memory protection.
[    1.832608] random: systemd urandom read with 14 bits of entropy available
[    1.851353] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    1.870032] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.05!

[    1.894442] systemd[1]: Set hostname to <ti81xx>.
[    2.140917] systemd[1]: Configuration file /etc/systemd/system/ipnc-rdk-usecase.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[    2.281010] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.304511] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.323508] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.343360] systemd[1]: Reached target Timers.
[  OK  ] Reached target Timers.
[    2.363750] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.393507] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    2.424368] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.443622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    2.473600] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.496761] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    2.542893] systemd[1]: Mounting /var/volatile...
         Mounting /var/volatile...
[    2.568827] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.606860] systemd[1]: Starting Synchronize System and HW clocks...
         Starting Synchronize System and HW clocks...
[    2.633474] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.654112] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.673440] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    2.705662] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    2.722992] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.753914] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    2.773536] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.796946] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    2.846590] systemd[1]: Mounting /media/ram...
         Mounting /media/ram...
[    2.878840] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.917061] systemd[1]: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.970900] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    3.041106] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    3.063671] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    3.093731] systemd[1]: Mounted /var/volatile.
[  OK  ] Mounted /var/volatile.
[    3.113539] systemd[1]: Mounted /media/ram.
[  OK  ] Mounted /media/ram.
[    3.133971] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Synchronize System and HW clocks.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started IPNC RDK use case service.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting uim-sysfs.service...
[    4.137285] autorun-usecase.sh[109]: numid=1,iface=MIXER,name='PCM Playback Volume'
[    4.156491] autorun-usecase.sh[109]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
[    4.157787] autorun-usecase.sh[109]:   : values=115,115
[    4.158898] autorun-usecase.sh[109]:   | dBscale-min=-63.50dB,step=0.50dB,mute=0
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started System Logging Service.
[    4.216747] autorun-usecase.sh[109]: numid=31,iface=MIXER,name='PGA Capture Volume'
[    4.236485] autorun-usecase.sh[109]:   ; type=INTEGER,access=rw---R--,values=2,min=0,max=119,step=0
[    4.237747] autorun-usecase.sh[109]:   : values=72,72
[    4.238867] autorun-usecase.sh[109]:   | dBscale-min=0.00dB,step=0.50dB,mute=0
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[    4.306999] autorun-usecase.sh[109]: numid=51,iface=MIXER,name='Right PGA Mixer Mic2R Switch'
[  OK  ] Started Kernel Logging Service.
[  OK  ] Started D-Bus System Message Bus.
[    4.332343] autorun-usecase.sh[109]:   ; type=BOOLEAN,access=rw------,values=1
[    4.391865] autorun-usecase.sh[109]:   : values=on
[    4.447788] autorun-usecase.sh[109]: numid=46,iface=MIXER,name='Left PGA Mixer Mic2L Switch'
[    4.473163] autorun-usecase.sh[109]:   ; type=BOOLEAN,access=rw------,values=1
[    4.501788] autorun-usecase.sh[109]:   : values=on
[    4.527284] autorun-usecase.sh[109]: Mount mtd6 and mtd7 partitions
[    4.616977] ubi0: attaching mtd6
         Starting Network Service...
[    4.801747] ubi0: scanning is finished
[    4.858156] net eth0: initializing cpsw version 1.10 (0)
[    4.863553] net eth0: initialized cpsw ale version 1.3
[    4.872000] net eth0: phy found : id is : 0x2000a231
[    4.877068] libphy: PHY  not found
[    4.880491] net eth0: phy "" not found on slave 1, err -19
[    4.916453] ubi0: attached mtd6 (name "NAND.data", size 12 MiB)
[    4.922421] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.929387] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    4.936145] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.943155] ubi0: good PEBs: 96, bad PEBs: 0, corrupted PEBs: 0
[    4.949102] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.956373] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2101145915
[    4.965561] ubi0: available PEBs: 0, total reserved PEBs: 96, PEBs reserved for bad PEB handling: 40
[    4.975235] ubi0: background thread "ubi_bgt0d" started, PID 142
[  OK  ] Started Network Service.
[    5.067393] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.188195] autorun-usecase.sh[109]: UBI device number 0, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[    5.783270] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 147
[    5.840810] UBIFS (ubi0:0): recovery needed
[    5.989525] UBIFS (ubi0:0): recovery completed
[    5.994146] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ubifs_volume"
[    6.002103] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.012098] UBIFS (ubi0:0): FS size: 5332992 bytes (5 MiB, 42 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    6.022250] UBIFS (ubi0:0): reserved for root: 251889 bytes (245 KiB)
[    6.028741] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID DE4A0BDB-CC3D-4EC0-867F-4BB051ACD2F6, small LPT model
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
[  OK  ] Started Network Name Resolution.
[  OK  ] Started uim-sysfs.service.
[    6.806135] ubi1: attaching mtd7
         Starting telnetd.service...
[  OK  ] Started telnetd.service.
         Starting thermal-zone-init.service...
[    7.090237] ubi1: scanning is finished
[  OK  ] Started thermal-zone-init.service.
[    7.136214] ubi1: attached mtd7 (name "NAND.reserved", size 41 MiB)
[    7.142531] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    7.149493] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    7.156244] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[    7.163253] ubi1: good PEBs: 332, bad PEBs: 0, corrupted PEBs: 0
[    7.169287] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[    7.176558] ubi1: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3205643590
[    7.185747] ubi1: available PEBs: 0, total reserved PEBs: 332, PEBs reserved for bad PEB handling: 40
[    7.198900] ubi1: background thread "ubi_bgt1d" started, PID 168
[    7.265603] autorun-usecase.sh[109]: UBI device number 1, total 332 LEBs (42156032 bytes, 40.2 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[  OK  ] Reached target Multi-User System.
[    7.813293] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 177
[    7.839471] UBIFS (ubi1:0): recovery needed
[    7.858414] UBIFS (ubi1:0): recovery completed
[    7.862976] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
[    7.870993] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    7.880975] UBIFS (ubi1:0): FS size: 35299328 bytes (33 MiB, 278 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[    7.891473] UBIFS (ubi1:0): reserved for root: 1667274 bytes (1628 KiB)
[    7.898138] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 86D1D97B-9B76-4360-9A31-79F43EAAB2D0, small LPT model

 _____                    _____           _         _   
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|  
              |___|                    |___|            

Arago Project http://arago-project.org ti81xx ttyS0

Arago 2016.05 ti81xx ttyS0

[    8.416301] autorun-usecase.sh[109]: wifi: in STA mode
ti81xx login: [    8.904122] cpsw 4a100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    8.918892] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.177927] cfg80211: World regulatory domain updated:
[    9.183184] cfg80211:  DFS Master region: unset
[    9.187563] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.197391] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.205452] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.213510] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.221554] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.231097] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.240638] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.248780] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.256837] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.973356] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   10.363769] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   10.390142] wlcore: loaded
[   10.983406] wlcore: PHY firmware version: Rev 8.2.0.0.232
[   11.096270] wlcore: firmware booted (Rev 8.9.0.0.48)
[   11.113179] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.820547] random: nonblocking pool is initialized
[   15.234516] autorun-usecase.sh[109]:     SSID: dlink6
[   15.237342] autorun-usecase.sh[109]:     SSID: MF90PLUS_A5B0DD

U-Boot SPL 2016.05 (Aug 05 2019 - 14:46:32)
Trying to boot from NAND


U-Boot 2016.05 (Aug 05 2019 - 14:46:32 +0300)

I2C:   ready
DRAM:  1 GiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
Net:   cpsw
Hit any key to stop autoboot:  3 0
DM8127-CSK# gg