Clik here to view.
AM3352: Want to confirm GPMC spec detail explanation
Part Number:AM3352Hi Champs,I would like to confirm this AM3352 data sheet http://www.ti.com/lit/ds/sprs717k/sprs717k.pdfTable 7-24. GPMC and NOR Flash Switching Characteristics—Synchronous Mode has...
View ArticleLinux/AM3352: Timer PWM configuration
Part Number:AM3352Tool/software: LinuxWe use the board made by am3352, the pins with pwm function are already occupied. I want to know if I can configure the pwm function with the pin of time function,...
View ArticleClik here to view.
66AK2G12: DDR3 connection and skews between devices.
Part Number:66AK2G12Hello,I'm connecting 4 DDR3 8 bit and 1 DDR3 8 bit by fly by topology. I have two questions:1. Below the data bus connection from the EVM:There aren't match between the numbering of...
View ArticleRTOS: Image distortion correction
Part Number: TDATool/software: TI-RTOSHi,I want to correct the image distortion of fisheye lens.I've got the internal parameters and distortion parameters of the lens.I don't know how to call the...
View ArticleKeystone2: reset Physical Count(CNTPCT in C14) reg in CP15 registers
Hi,this is Michael Lawnick from Nokia.My colleague opened a question in <https://e2e.ti.com/support/processors/f/791/t/804481>The answer by TI seemed not to be related to the problem:We search...
View ArticleClik here to view.
RTOS/DRA76P: how to modify EMMC ipu2 patition size in uboot to load iup2...
Part Number:DRA76PTool/software: TI-RTOShi all,my board is dra76p, system is boot from EMMC. Now i want realize early boot and Late attach, and boot the ipu2 by bootloader.i have do some modify...
View ArticleLinux/TDA2SX: How do i get 60MHz clock on GPIO Pin??/
Part Number:TDA2SXTool/software: LinuxHello Sir,How do i clock out 60MHz at GPIO pin ? Is there any examples???Regards,ZInal
View ArticleClik here to view.
Linux/TDA2PXEVM: [QT] how to create texture image by eglCreateImageKHR()...
Part Number:TDA2PXEVMTool/software: LinuxHi: we are working on VisionSDK and now succeed to run the QT.we have an surround view application based on QT, as you known that visionSDK don't support RGB...
View ArticleLinux/AM3352: GPIO configuration
Part Number:AM3352Tool/software: LinuxHi,I have few questions related to the gpio configuration from u-boot till linux.Use case:Make a pin (lets say H18 on ZCZ) as HIGH(3.3V)Queries:What happens when...
View ArticleTMS320C6746: SPI interrupt pace
Part Number:TMS320C6746Hi Team,Can TMS320C6746 SPI support RX interrupt pace configuration?According to the datasheet , does it mean the SPI port only support a interrupt triggered by ONE word...
View ArticleLinux/PROCESSOR-SDK-AM65X: Building the SDK
Part Number:PROCESSOR-SDK-AM65XTool/software: LinuxHi,When I tried to build linux for am65x , I got steps from this url. . But it is downloading recipes from outside. This steps didnot touched PDK.So...
View ArticleTMS320C6747： How to program (write) to external flash ROM
Part Number:TMS320C6747Thank you for the ccs road map. I found that using ccs v9 and xds200 usb we could develop C6747. What is flashing means to program (write) to external flash ROM? Is this not...
View ArticleClik here to view.
RTOS/AMIC110: Mismatch between CoE EtherCAT and input data
Part Number:AMIC110Tool/software: TI-RTOSHi everyone,I developed an application to exchange a variable between the AMIC110 ICE and the master (pc) using the EtherCAT industrial protocol.The problem is...
View ArticleLinux/DRA72XEVM: Unable to run TI provided use cases in Vision SDK 3_0_7 on...
Part Number:DRA72XEVMTool/software: LinuxHi TI Forum,We are trying to run TI provided use cases on our custom board. We are using Vision SDK 3.0.7. We are getting below error:[Attaching to DSP2 is...
View ArticleRTOS/AM5728: Board_init requires UART_config when UART is not needed
Part Number:AM5728Tool/software: TI-RTOSHi all,I'm trying to create simple SYS/BIOS project with using of Board_init() function and I found out that it is working under DSP but not under ARM. My code...
View ArticleJ6PEVM577P: FPD Link 3 output not working on Android
Part Number:J6PEVM577PHi,We have the J6+ EVM J6PEVM577P with the FPDL3 display (TI PN EVM5777LCDTS-V4-0). We've flash the Prebuilt Release Image for Android and connected to the FPDL3 display but...
View ArticlePROCESSOR-SDK-AM335X: Ethernet driver code
Part Number:PROCESSOR-SDK-AM335XHi,In my application I have to load the application code through Ethernet in NAND Flash. Is there any driver code available? How can I do this?RegardsGaurav
View ArticleRTOS/TDA3XEVM: Writing our own software on vision sdk app/modules folder
Part Number:TDA3XEVMTool/software: TI-RTOSHi,We are planning to write own modules under apps/src/rtos/modules directory, But we are not sure how & where to initiate the SYSTEM_CMD_CREATE &...
View ArticleTMS320C6416: TMS320C6416 Emulator Support with new Code Composer Studio
Part Number:TMS320C6416I am planning the development of a SW project based on a custom target HW (already developed by my company) equipped with a TMS320C6416 DSP and I would like to use the latest CCS...
View ArticleAM3352: NAND flash recommendation
Part Number:AM3352Can I use the Nflash of MX30LF2G18AC?(Please visit the site to view this file)
View Article