Linux/LINUXSDK-OMAPL138: Touch screen support via USB
Part Number:LINUXSDK-OMAPL138Tool/software: LinuxHi,My customer is finding a touch screen module to be connected to OMAPL138(running ProcSDK Linux on OMAPL138 LCDK) via USB.Do you have any recommended...
View ArticleLINUXSDK-OMAPL138: Some issue about OMAPL138.
Part Number:LINUXSDK-OMAPL138Dears:We are evaluating OMAPL138, and we have some issues as follows:1. Can be ADS8588 controlled by DSP of OMAPL138 directly, and we don't want to ARM to control it?2. I...
View ArticleOMAP-L137: Syncing ADC and DSP when both units are isolated from each other
Hello,I'm having a bit of trouble syncing the ADC and the DSP. The DSP is on the non-isolated side of the board and the ADC is on the isolated side of the board. The sides are separated by digital...
View ArticleClik here to view.
Compiler/OMAP-L138: GPIO PinMux Not Building
Part Number:OMAP-L138Tool/software: TI C/C++ Compiler
View ArticleLinux/OMAP-L138: Information about DSP IPC requirements for...
Part Number:OMAP-L138Tool/software: LinuxI'm trying to find more information on the DSP IPC solution for PROCESSOR-SDK-LINUX-OMAPL138 04_03_00_05. I'm looking for the TI RTOS version and documentation...
View ArticleLinux: How to view DSP logs/printfs on Linux OS.
Tool/software: LinuxHi there, I have got the basic IPC example working on the OMAPL138 LCDK.The SDK is v4.0.0.4 and Linux is 4.9.28In the DSP Core, I am using following command to print errors...
View ArticlePROCESSOR-SDK-C6747: Code for Audio Preprocessing System Reference Design for...
Part Number:PROCESSOR-SDK-C6747I would like to use TIDEP-0099 reference design as a starting point for my project. I have installed CCS and OMAPL137_dsp_setupwin32_1_00_00_11. I have a hard time...
View ArticleEthernet is not working with 100Mbps
We have a design based on the omapl138 EVM. We are using the Ethernet port for a transmit data using lwip 1.3.2 ( raw UDP). The PHY is capable of full duplex and 100 Mbps and the same I have...
View ArticleLinux/PROCESSOR-SDK-OMAPL138: Build Processor SDK v4.03.xx with Kernel 4.14...
Part Number:PROCESSOR-SDK-OMAPL138Tool/software: LinuxHi, I was just able to build the Processor SDK 4.03 from scratch. Now I'm looking to building it with an updated Kernel of 4.14 instead of the...
View ArticleCCS: 6748
Tool/software: Code Composer StudioCan some one suggest which library supports image processing of LCDK6748 floating point processor?Give that library if it is possible.
View Article6748
I am working on LCDK6748 .I downloaded sprc589.zip image simulink library.If it supports c6748 some one please explain me how to work on that library in ccsI was uploaded library(Please visit the site...
View ArticleOMAP-L138: Lifetime
Part Number:OMAP-L138Is the OMAP-L138 (ARM+DSP) currently recommended for new designs?We're starting development and plan for the product to be active for a further 5 years or longer.Should a NRND be...
View ArticleCCS/OMAP-L138: Using ipclite example for DSP and ARM cores in OMAP-L138
Part Number:OMAP-L138Tool/software: Code Composer StudioHii'm trying to make running ipclite communication between ARM and DSP on a OMAPL138.using the example provided in starterware, i able to make it...
View ArticleCCS/OMAP-L138: How do I get started?
Part Number:OMAP-L138Tool/software: Code Composer StudioI've got a TMDSLCDK138 dev board. It came with truly ancient CCSv5, which I actually finally got running... inside a 32 bit VirtualBox VM...
View ArticleTMDSOSKL137: EDMA3 PaRAM CCNT race condition?
Part Number:TMDSOSKL137Hello,I want to find a way to initiate 1 QDMA transfer from the CPU without writing the entire PaRAM entry. The only solution I have been able to dream up is to create a QDMA...
View ArticlePROCESSOR-SDK-OMAPL138: looking for the PIN MUX tool
Part Number:PROCESSOR-SDK-OMAPL138Hi, there.I am looking for the PIN MUX tool.I find this document focus.ti.com/.../sprab63b.pdf, and this zip file http://www-s.ti.com/sc/techlit/sprab63.zipbut the zip...
View ArticleRTOS/OMAP-L138: USB_DevAudio Example through CCS linking errors
Part Number:OMAP-L138Tool/software: TI-RTOSHi,I'm using the OMAP-L138 LCDK, I obtained the pdk_omapl138_1_0_4 for the OMAP-L138 and wanted to compilea the USB_DevAudio example that would sit on the DSP...
View ArticleClik here to view.
OMAP-L138: OMAP-137 power supply sequence
Part Number:OMAP-L138Hi,In this post, i specified the part no as OMAP-L138, but that is actually OMAP-L137 to navigate the correct forum.Here is my customer`s power supply sequence. OMAP L137 Data...
View ArticleOMAP-L138: uPP throws Channel Q underrun/overflow interrupt when DSP is...
Part Number:OMAP-L138Hi,We have an OMAP-L138 processor, whose DSP has a uPP interface with an FPGA.So far, we have been working at a clock rate of 300 MHz (which makes the uPP module and transmit...
View ArticleOMAP-L138: How can I access PBBPR register?
Part Number:OMAP-L138Hi Champs,My application using SYS/BIOS can not access the DDR2/mDDR.PBBPR register.I'm trying to access it in main() before BIOS_start(), but I can not. Is there any setting what...
View Article