Clik here to view.
OMAP-L137: OMAP-L137 \RESET Input Pull-up Resistor
Part Number:OMAP-L137The \RESET input (G3) in the OMAPL137 does not contain an internal pull-down or pull-up. The eval schematic for the omapl137 contains a 10k ohm pull-up (page 10,...
View ArticlePermissible connections to unpowered USB on C6747
The background to my question is that I am trying to specify connections that will be compatible across a range of products.Suppose the 1.8V USB power supply is not provided on my board and none of the...
View ArticleOMAPL137-HT: Performance Benchmarks
Part Number:OMAPL137-HTI am trying to find out performance benchmarks for this dsp. Specifically I am looking for 1024 point Complex FFT (Radix 4, with reversal) Speed (in milliseconds) and required...
View ArticleGadget serial driver for Windows 8 and Windows 10
Hi,We are using OMAPL138 with linux 2.6.37 version for our Product. We have Gadget serial driver for Winows XP, Windows Vista and Windows 7.But we do not have for Windows 8 and Windows 10 and we are in...
View ArticleOMAP-L138: LCD for OMAP-L138 Development Kit (LCDK)
Part Number:OMAP-L138I understand that the OMAP-L138 LCDK only works in raster mode (LIDD mode not supported) and is interfaced through the J8, db15 VGA connector.Can anyone please provide parts...
View ArticleClik here to view.
OMAP-L138: Timer in unchained mode
Part Number:OMAP-L138Hi,What does it mean "upon a successful non-zero match" in the paragraph below?Thanks.- YY
View ArticleOMAP-L138: OMAP-L138 McBSP and DAC8534
Part Number:OMAP-L138I was reading in the sprugj6c for the McBSP set up and operation. I noticed that in section 2.10 it states "The McBSP on this device does not support the SPI protocol." Does that...
View ArticleOMAP-L138: When is ProcSDK available for OMAP L138 ?
Part Number:OMAP-L138Hi,I found OMAP L137 was supported on the latest ProcSDK release, but how about OMAP L138 ? Can you share the information about the release schedule for OMAPL138 ProcSDK...
View ArticleOMAP-L138: At which point is the DDR2 memory controller set up?
Part Number:OMAP-L138The OMAP-L138 can set a number of DDR2 registers - we have used AISGEN generated files to set this as part of the U-boot loader and we can see the values taken effect in the SYSTEM...
View ArticleRTOS: How does Binary Semaphore works?
Tool/software:TI-RTOSHi there, Could someone explain me how does the binary semaphore works???If semaphore is already posted and then one more semaphore is posted, would this mean now the binary...
View ArticleLinux/OMAPL138B-EP: New Processor SDK Availability
Part Number:OMAPL138B-EPTool/software: LinuxOn the http://processors.wiki.ti.com/index.php/Processor_SDK_Supported_Platforms_and_Versionspage it says that the Linux Processor SDK for the OMAP-L138 is...
View ArticleOMAP-L138: OMAP-L138 DDR2
Part Number:OMAP-L138Hi Team,According to OMAPL138 datasheet, it can support up to 512MByte memory space, but I can't find any DDR2 device that can work with OMAPL138 DDR2 Controller.Can TI recommended...
View ArticleCCS/AM1808: CCS/AM1808
Part Number:AM1808Tool/software: Code Composer StudioHi there,I want to reboot the chip by setting any register.Is there an register to reset the chip?
View ArticleOMAP-L138: Sequence boot of OMAPL138 security
Part Number:OMAP-L138Hi TI,I would like change my solution for security: from normal OMAPL138 to security OMAP, E SERIES, part number is OMAPL138ZCE E. Right now, I dont know how to boot ARM and DSP...
View ArticleAM1808: AM1808EZWTD4 bga substrate pad size and solder mask opening size
Part Number:AM1808Champs,Customer has requested the above info . This in the same context and by the same customer who asked earlier for the same info on...
View ArticleClik here to view.
SECDEVTOOL-OMAPL138C6748: Wake up ARM core in DSP secondary boot loader
Part Number:SECDEVTOOL-OMAPL138C6748Hi TI,I'm writing a DSP secondary boot loader for secure OMAPL138/C6748 and running in trouble after waking up the ARM core. Only the ARM application runs, although...
View ArticleOMAPL138B-EP: OMAPL138EZWTD4E - Software Defined Radio (SDR) OMAP-L138-Based...
Part Number:OMAPL138B-EPI hope I posted this question in the correct forum.I would like to know if the Software Defined Radio (SDR) OMAP-L138-Based Reference Platform can be used to develop a prototype...
View ArticleStarterware/OMAP-L138: omapl138
Part Number:OMAP-L138Tool/software: StarterwareSir,I'm developing the drivers for RTC, immediately after setting the RTC time and Date (after considering the 4 cycle delay as per datasheet ) , at the...
View ArticleStarterware/TMS320C6748: Incorrect implementation of API "CacheEnable"
Part Number:TMS320C6748Tool/software: StarterwareHello,While using C6748 StarterWare version 1.20.04 in our product, we found incorrect implementation of CacheEnable API which configures L1P, L1D and...
View ArticleOMAPL138B-EP: OMAPL138EZWTA3
Part Number:OMAPL138B-EPHi,I am facing issue with G18 pin (GP1[4]) of OMAPL138EZWTA3 IC which is configured as GPIO input pin. I am seeing +3.3V voltage on this pin in Oscilloscope and its register...
View Article