Problems booting from an NFS server with U-boot in a AM1705 custom board
Problems booting from an NFS server with U-boot in a AM1705 custom boardHello,First of all, my board has the following hardware:SPI Flash : K0XMFI011 (Spansion) - 4MBytes - Connected to SPI0Nand Flash:...
View ArticleWhere is 'vmlinux' file
Hello,I'd like to debug OMAP-L138 LCDK board with embedded linux.I installed CCSv6.1.2, arago-2011.09-armv5te-linux-gnueabi-sdk, mcsdk_1_01_00_02, and sys/bios 6.35.04.To debug project in CCSv6, I have...
View ArticleStarterWare 1.20.04.01 McASP Example without EDMA
Hi, i'm trying McASP on c6748 LCDK with XDS100v2. The loopback example of McASP from StarterWare can work.In the example, the EDMA with ping-pong operation transfers/receives the buffers.But I want to...
View ArticleStarterWare 1_10_04_01 hw_pllc_OMAPL138.h #define PLLC_PLLM_PLLM (0x0000001Fu)
Hi1.AISgen told that PLLM can be from 1 to 64.For that #define PLLC_PLLM_PLLM must be (0x0000003Fu)2.spruh77c.pdf told (8.3.9 PLL Multiplier Control Register (PLLM))PLLM 0-1FWhere is the...
View ArticleUnable to implement EDMA with SYSBIOS on OMAPL138 LCDK.
Hi there,I have converted the NAND example from the StarterWare to work with SYSBIOS.I have enabled the interrupts for completion and error using the cfg.Moved the NAND open and Nand read/ write api to...
View ArticleClik here to view.
SATA Cable Connection with OMAP-L138 LCDK
Hello,I'd like to communicate SSD through SATA. Usual SSD has 22-pin SATA connector.However, there is only 7-pin SATA Conncetor in an OMAP-L138 LCDK.If I connect SSD and LCDK board with 7pin to 22pin...
View ArticleLinux spi-davinci driver: SPI Tx sends all zeros instead of actual data,...
Processor is OMAP-L138, running Linux 3.10.0 on the ARM. Linux has SPIDEV enabled and spi-davinci providing the low-level SPI support. SPI0 and SPI1 are both used, but SPI0 is only used on startup to...
View ArticleOMAP-L138 USB OTG USB0_ID Connection?
Hi Support,For OTG mode, do NOT connect the USB0_ID pin, that is, leave the pin floating. Is this correct?Thanks.
View ArticleBrownout conditions for OMAPL138BZWTD4 and TMS320C6748 processors
Hi,Is there any specific brownout condition/thresholds given for OMAPL138BZWTD4 and TMS320C6748 processors?No information was provided for brownout conditions in the processor datasheet.Regards,Archana...
View ArticleClik here to view.
NOT ABLE TO DEBUG ARM UBL BOOTLOADER OMAPL137
HiTeam,I am trying to build the davinci code that is provided DaVinci-PSP-SDK-03.20.00.13I am trying to build the code for ARM UBLMy intention is to do Inline debugging of ARMUBL source code so the...
View ArticleUnable to read "uImage" from mmc 0:1
I'm using OMAPL138+ MT29F4G08ABADAWP for my project,and the kernel: 3.2.0 uboot : 2009.11and we have some boards,maybe 100 psat the first time, and all boards can work OK, and then...
View Articlemplayer for omapl138
hai sir, i tried to cross compile mpalyer in my linux host but i am getting same error as previously i mentioned can you please send me mlayer binary to my id mohammed.hussain@starcominfotech.com Below...
View ArticleDetecting and mounting NAND Flash
Hello,First of all, my board has the following hardware:CPU: AM1705SPI Flash : K0XMFI011 (Spansion) - 4MBytes - Connected to SPI0Nand Flash: S34ML01G200TFI000 (Spansion) - 128MBytes - Connected to...
View ArticleSM320C6748-HIREL EVM
Dear all,my AA customer is interested in the evaluation of the SM320C6748-HIREL, is the TMDSLCDK6748 kit the right evaluation kit for the part ?thanks,Domenico
View ArticleClik here to view.
SDRAM INLINE DEBUGGING NOT WORKING
HiTeamI have an issue in debugging the code using sdramI am trying to achieve the followingI have added a led toggle code in my DSP-UBL codeMy intention to do thisAs i am using the custom board i want...
View ArticleUBOOT FILES TO BE MODIFIED FOR OMAPL137 LINUX
HItEAM I AM TRYING TO BOOT OMAPL137 ON MY CUSTOM BOARD!I HAVE CHANGED THE CODE ACCORDINGLY FOR SPI CONFIGURATION IN ARM AND DSP -UBL.I NEED TO KNOW WHAT COULD BE THE CHANGES THAT HAS TO BE DONE IN...
View ArticleInstalling and compile a program with OpenCV to run on OMAP l-138 lcdk
Hi experts,I am trying to compile a simple program using OpenCV 2.4.13, but i got always a bunch of errors while compiling.. Can you help me understand how can i compile the program?I completed this...
View ArticleBCH8 on OMAP-L138
Hi.We have OMAP-L138 board with Davinci nand controller. Is BCH8 ECC is supported in the Linux software for this controller? I am looking through the Linux kernel Davinci Nand driver code and the...
View ArticleReturned test clock in OMAPL138BZWTD4 processor
Hi,We are using RTCK functionality of OMAPL138BZWTD4 processor in our design.Can anyone please let us know the logic state of RTCK pin once the processor comes out of reset during power-up?Is it...
View ArticleSearching for TMDXLCDK138 code examples
Hi,I'm quite new here. I was searching for a long time, but I probably did not know where to search.I'm trying to operate TMDXLCDK138. This is the board: www.ti.com/.../tmdslcdk138I manage to connect...
View Article