OMAP4460: DSI errors
Hello everyone,I am new to this forum so pardon me I am posting it in the wrong section, I request Mods to move this thread to the correct section.My question is that I am using custom OMAP4460 board...
View ArticleDSP GEL file in linux system + OMAPL137
Dear Sir/Madam,Where is the DSP GEL file in the Linux file system of OMAPL137 platform?Best regards,Jone.
View ArticleClik here to view.
C674X (DSP Core)
Hi All, I have downloaded CCS V6 and planning to work on DSP CORE(C67XX). But, when i select C67XX and see for the compiler version in the drop down box then it shows empty. Also, at the...
View ArticleL138 TSC2046 kernel 3.1.10 LCDK
Hello,all.I am using L138 board which modified by OMAP-L138 LCDK reference design,and added TSC2046 to drive touchscreen,the linux kernel version is 3.1.10 in the ti-sdk-omapl138-lcdk-01.00.00...
View ArticleHow to connect Beagle Board xM LCD to TMDSLCDK138
As I found out it's possible to use Beagle Board xM LCD (such as this http://elinux.org/CircuitCo:BeagleBone_xM_LCD7) with TMDSLCDK138.Is it possible to connect LCD to TMDSLCDK138 directly without any...
View ArticleOMAPL137BPTPH-HT STARTERWARE EXAMPLE CODE
Hello All, Am using OMAPL137BPTPH-HT controller which has a dual core(ARM9 + C674x). In my development i have planned to use only the DSP (C674x)Core.So, can you please provide me...
View Articleu-boot rebuilded not works
Hi,I am working with AM1808 evm and software ti-sdk-am180x-evm-06.00.00.00 . If I load into the flash the prebuilded file u-boot.bin (folder...
View ArticleTDA3xx Error while building starterware_01_03_00_09 examples
Hi, I would like to run mcspiMasterSlave example code from VISION_SDK_02_07_00_00 on EVM TDA3xx. I am referring StarterWare_UserGuide.pdf I am trying to build examples code of starterware_01_03_00_09...
View ArticleBAM_autoAllocMemRec() return "size should not be 0!!"
Hi, Yogesh or anyone:I am creating my own algorithm applets by referencing existing ones.I get stuck when creating bam graphic. The stuck point is when performing search for optimized width and...
View ArticleAboat LED driver and FLASH life
root@tl:/sys/devices/platform/leds-gpio.1/leds/user_led1# lsbrightness device max_brightness power subsystem trigger ueventroot@tl:/sys/devices/platform/leds-gpio.1/leds/user_led1# cat brightness255In...
View Articledisabling the ARM on OMAPL137-HT
HiI want to disable the ARM in OMAP-L137 and use DSP only. ARM booting should not happen, and only the DSP to be up.How can I do this? Software and/or hardware solution. Thankssekhar
View ArticleCan I use IQmath on ARM core of OMAP-L138 in CCS5?
Can I use IQmath on ARM core of OMAP-L138 in CCS5?
View ArticleMax. recommended SPI0 clock frequency on OMAP L138
Hi,We are using an OMAP L138 based custom board. I have noticed that both UBL and UBoot we are using sets the clock frequency for SPI0 to 30MHz. I have seen in a TI spec. that the maximum recommended...
View ArticleCCS V5.6
Hello All, Am new TI family and i would like to install the CCS V5.6 and started working on the IDE. So, can you please provide me the link to download the file..!! Thanks &...
View ArticleAm1808 nor flash size
Hi,I am working with AM1808 EVM and UI boards. On the UI board there is a NOR 8 MByte flash.Infact the result of u-boot 'flinfo' command is :U-Boot > flinfoBank # 1: CFI conformant FLASH (16 x 16)...
View ArticleClik here to view.
Unable to Set the Target in the C6748 LCDK
Hi, I have been able to use CCS V6 with the MSP430. I already tested the LCDK by running the face detection program. I also tested the TI XDS100v2 USB Debug Prove (executing the "Verify" option, when...
View ArticleOMAPL137(DSP)
Hello All, Currently am working with OMAPL137 and using only the DSP core also am masking the ARM9 core. So, i have planned to implement to algorithms on my DSP. Am getting the data...
View ArticleOMAP sample code
Hi william, Thanks for your input and will check the same. But, currently am working OMAPL137 and i was looking for the sample code. I just wanted to see the basic sample codes for gpio intilization,...
View Articleomapl138e boot problem
Hello!I am using OMAPL138E processor with CCS 5.2.1.Booting omapl138E from spi flash i found that spi flash read process simply stopped and program not started, jtag unfortunately inaccessible. But...
View ArticlePutting ARM into wait-for-interrupt sleep mode. Need example code.
Hello,I see section 10.6 of spruh77a says to use a CP15 instruction (MCR p15, #0, <Rd>, c7, c0, #4) to put the ARM into wait-for-interrupt sleep mode, but does anyone have example code of how to...
View Article