Part Number:OMAP-L137
Hello,
I accidentally erased content of flash memory on my TMDSOSKL137 Rev. J board. There was U-Boot marked as 1.3.3 and year 2012.
I tried to restore flash memory to factory state and I found probably the same version of U-Boot on Spectrum Digital site http://support.spectrumdigital.com/boards/evmomapl137/revg/
As for bootloader binaries for ARM and DSP (dsp-spi-ais.bin and ubl-spi.bin) I found 2 versions of these. First version is from LSP 2.20 with date of 04.2009 and second version is from DaVinci PSP SDK 03.20.00.14 with date of 11.2010.
I want to use the command line method for flashing memory, so I found Flashing Tool 2.40 and used it with -flash_dsp option. The flashing process was successful.
Unfortunately after flashing memory with bootloader binaries from LSP there was no output on serial console.
When I tried binaries from DaVinci PSP the board was booting correctly and I got output on console, but only after it was resetted with RESET button. Nothing happens directly after powering up the board.
Obviously I used UART2 setting for flashing process and SPI0 Flash for booting.
Thanks for help!