OMAPL138_StarterWare_1_10_04_01 usb_dev_bulk

Dear All,

I am working to test the usb_dev_bulk sample with OMAPL138 EVM from LogicPD.

I have flashed the images to the EVM but it can no work correctly.

The LCD show the message "Configuring USB....".

I doubt my setting on AISgen, so please check it and advice me.

<General>

Device Type : d800k008 ARM

Boot Mode   : SPI0 Flash

Clock Source : Crystal 24MHz

<Peripheral>

Module Clock   : 150MHz  SPI Clock 1     1.00MHz

<PLL0>

Pre-Divisor   : 1,   Multiplier : 25,   Post-Divisor : 2,   DIV1:1,   DIV3:3,    DIV7:6,    CPU: 300MHz,   SDRAM:100.00MHz,  EMAC: 50.00MHz

<PLL1>

Multiplier : 22,   Post-Divisor: 2,   DIV1:1,   DIV2:2,   DIV3:3,   DDR: 264MHz

<DDR>

DDR Clock : 264MHz,   Memory Type: mDDR,   DRPYC1R : 0x000000C4, SDCR: 0x0A03C622,  SDCR2: 0x00000000

SDTIMR1: 0x1C912A08,  SDTIMR2: 0x3811C700,  SDRCR: 0xC0000492

Thank you for your help!