Hi,
The uart console will be halted when DSP/BIOS task shift.
My customer found that the console will be halted in below scenario.
1. Run Linux in ARM9;
2. Connect ARM9-core;
3. Connect C674x-core;
4. Load hello.out into DSP and run;
It used DSP/BIOS hello example for test.
When run DSP core, the uart console is active;
But it will be halted when stop DSP core running.
The uart console:
For hello project, I modified memory base address and length for DDR in order to avoid DDR memory confliction with ARM9 Linux.
