Part Number: AM5728

Tool/software: TI-RTOS

Hello, TI Experts,

Our customer sent us questions about "how to add the new memory area of OCMC_RAM2"

with below EtherCAT-Master reference design(TIDEP0079) by using TI-RTOS(PROCESSOR-SDK-RTOS-AM57X).

http://www.ti.com/lit/ug/tidubz1b/tidubz1b.pdf

They would like to add other memory area for their programs to OCMC_RAM2.

But the below CCS project is already configured for EC-Master program in DDR Memory area.

(We also add our test TMDXIDK5728-CCS project as a reference.)

https://www.acontis.com/en/ethercat-for-ti-processors.html

Question:

- Could you tell us how to add the new memory area of OCMC_RAM2 for their new programs?

Best regards,

(Please visit the site to view this file)

Part Number: AM5728

Tool/software: TI-RTOS

Hello, TI Experts,

Our customer sent us questions about "SBL build with CCS:8.3.0.00009" by using TI-RTOS(PROCESSOR-SDK-RTOS-AM57X).

They reported us the below strange behavior for SBL build referring below link.

http://processors.wiki.ti.com/index.php/Creating_a_CCS_Project_for_SBL_on_AM572x_GP_EVM

The link said like below;

   "Placing sbl_init.S at the top of the link order ensures that the Entry symbol is placed at the correct location."

So they created the Link Order from the link guide.

And then they checked "ganerated makefile" after build.

But this Link order is different like below.

And we also checked the same procedure with CCS:8.1.0.00011.

And the generated makefile seems to be proper Link Order like below.

Questions:

   - Could you tell us how to solve this problem with CCSv8.3?

   - Why is the link order of generated makefile with CCSv8.3 is different order of "Link order configuration" in preference setting?

Best regards,

Part Number: TMDX654IDKEVM

Tool/software: Linux

Hello,

I was able to read temperature of the SOC in linux from /sys/class/thermal/thermal_zone*/temp.

Is any rule to convert that value in a physical temperature? I assume  that this value is divided by 1000 but I observed that the value is fluctuating by 2-3 degrees every 1 second since we are not running any complex app on the cores.

Best regards!

Part Number: 66AK2G12

Hello Champs,

According to the requirement of data sheet, the power supply for 66AK2G12 on customer product board is CVDD&CVDDD1:0.9V, DVDD_DDR:1.35V, DVD18:1.8V and DVD33:3.3V. At present, the work is basically normal. Because DDR may not be used in their application, DVDD_DDR can be connected to 1.35V according to the working conditions recommended in section 5.4 of data sheet,DVDD_DDR can be connected to DVDD18. So I did an experiment like this:

1. Disabling DDR in Firmware;

2. At this time, the voltage and current of PCBA are 5V/0.56A.

3. Remove DDR device U15 and VTT power U16 from the board, then connect DVDD_DDR to DVD18. After power-on, PCBA can work normally and access DSP through GUI, but the working current of PCBA becomes 0.64A, about 80 mA more than before.

It is said that the power consumption should be reduced theoretically without DDR and DDR power supply, but the power consumption will be increased instead. Since there is no more detailed description of connecting DVDD_DDR to 1.8V without DDR in datasheet, I do not know whether it is OK to do so, whether it is normal to increase the power consumption, and whether it will produce the reliability of DSP. Adverse effects? Thank you.

When DDR EMIF is not being used, the DVDD_DDR supply may be connected to a 1.8 V power source to eliminate the 1.35 V power.source which is required when using DDR EMIF.

Thanks.
Rgds
Shine

Part Number: DRA77P

Tool/software: Linux

Hi,

We intent to use the lcd1 interface for hdmi on our custom board.

The block diagram of the circuit is as follows,

We have made required changes in the pin mux and added lcd node in the device tree.

(Please visit the site to view this file)

We needed some guidance in device tree for bringing up the hdmi interface from lcd1 port.

Regards,

Padmesh

Part Number: AM5748

Tool/software: Linux

Hi Sir 

We used latest SDK for AM5748 IDK EVM.

Do you know how to enable HDMI output and how to modify the setting to support it ?

please  advise.

BR

Yimin

Part Number: TMDSIDK437X

Tool/software: Linux

Hello,

I just got my hands on the processor sdk linux-rt-am437x-evm-06.00.00.07 and I am trying to boot Linux on an idkAM437x

What I did so far is :

-Create a SD card with the script : create-sdcard.sh

-Create a boot/ directory in the rootfs partition of the sd card

-Paste the following files in that directory : am437x-gp-evm-hdmi.dtb and zImage (from ti-processor-sdk-linux-rt-am437x-evm-06.00.00.07/targetNFS/boot/)

Here is what I get as a result :

0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - bad CRC, using default environment
 
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Unable to read file boot.scr **
716 bytes read in 3 ms (232.4 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
4055552 bytes read in 212 ms (18.2 MiB/s)
52827 bytes read in 13 ms (3.9 MiB/s)
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 8fff0000, end 8ffffe5a ... OK
 
Starting kernel ...
 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.38-rt19-g1224cd679e (oe-user@oe-host) (gcc ver
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio
[    0.000000] OF: fdt: Machine model: TI AM437x GP EVM
[    0.000000] Memory policy: Data cache writeback
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 48 MiB at 0xbd000000
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM437x ES1.2 (sgx neon)
[    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x43c with
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyO0,115200n8 video=HDMI-A-1:800x60
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 976300K/1048576K available (8192K kernel code, 313K rwdat
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 314 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 260 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]  No expedited grace period (rcu_normal_after_boot).
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C: platform modifies aux control register: 0x0e030000 -> 0x3e43
[    0.000000] L2C: DT/platform modifies aux control register: 0x0e030000 -> 0x3
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] OMAP L2C310: ROM does not support power control setting
[    0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x4e430000
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000013] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478
[    0.000025] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max
[    0.000031] OMAP clocksource: timer1 at 24000000 Hz
[    0.000426] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff
[    0.000431] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000846] Console: colour dummy device 80x30
[    0.000968] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000971] This ensures that you still see kernel messages. Please
[    0.000973] update your kernel commandline.
[    0.001007] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[    0.060172] pid_max: default: 32768 minimum: 301
[    0.060361] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.060379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.061287] CPU: Testing write buffer coherency: ok
[    0.061338] CPU0: Spectre v2: using BPIALL workaround
[    0.062326] Setting up static identity map for 0x80100000 - 0x80100060
[    0.062612] rcu: Hierarchical SRCU implementation.
[    0.063331] EFI services will not be available.
[    0.064285] devtmpfs: initialized
[    0.075615] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9
[    0.076047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
[    0.076073] futex hash table entries: 256 (order: 1, 8192 bytes)
[    0.079318] pinctrl core: initialized pinctrl subsystem
[    0.080057] DMI not present or invalid.
[    0.080779] NET: Registered protocol family 16
[    0.082475] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.158737] omap_l3_noc 44000000.ocp: L3 debug error: target 8 mod:0 (unclear
[    0.158963] omap_l3_noc 44000000.ocp: L3 application error: target 8 mod:0 (u
[    0.165133] OMAP GPIO hardware version 0.1
[    0.175711] No ATAGs?
[    0.175736] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint
[    0.175751] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.191185] edma 49000000.edma: TI EDMA DMA engine driver
[    0.195598] media: Linux media interface: v0.10
[    0.195652] videodev: Linux video capture interface: v2.00
[    0.195751] pps_core: LinuxPPS API ver. 1 registered
[    0.195760] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
[    0.195782] PTP clock support registered
[    0.195826] EDAC MC: Ver: 3.0.0
[    0.196697] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.197137] Advanced Linux Sound Architecture Driver Initialized.
[    0.198459] clocksource: Switched to clocksource timer1
[    0.207160] NET: Registered protocol family 2
[    0.208071] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 14336
[    0.208143] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.208230] TCP bind hash table entries: 8192 (order: 5, 196608 bytes)
[    0.208993] TCP: Hash tables configured (established 8192 bind 8192)
[    0.209266] UDP hash table entries: 512 (order: 3, 32768 bytes)
[    0.209394] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[    0.209764] NET: Registered protocol family 1
[    0.210486] RPC: Registered named UNIX socket transport module.
[    0.210500] RPC: Registered udp transport module.
[    0.210507] RPC: Registered tcp transport module.
[    0.210512] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.212475] Initialise system trusted keyrings
[    0.212795] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.217906] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.218937] NFS: Registering the id_resolver key type
[    0.218976] Key type id_resolver registered
[    0.218983] Key type id_legacy registered
[    0.219030] ntfs: driver 2.1.32 [Flags: R/O].
[    0.219459] pstore: using deflate compression
[    0.221512] Key type asymmetric registered
[    0.221528] Asymmetric key parser 'x509' registered
[    0.221605] bounce: pool size: 64 pages
[    0.221672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
[    0.221684] io scheduler noop registered
[    0.221691] io scheduler deadline registered
[    0.221954] io scheduler cfq registered (default)
[    0.221967] io scheduler mq-deadline registered
[    0.221973] io scheduler kyber registered
[    0.224605] pinctrl-single 44e10800.pinmux: 199 pins, size 796
[    0.276992] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.280382] omap8250 44e09000.serial: No clock speed specified: using default
[    0.281137] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 31, base_baud =
[    0.976941] console [ttyS0] enabled
[    0.981104] omap8250 481a6000.serial: No clock speed specified: using default
[    0.989887] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud =
[    1.000912] omap_rng 48310000.rng: Random Number Generator ver. 20
[    1.008418] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not foun
[    1.017776] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0
[    1.024732] omapdss_dss 4832a000.dss: Dropping the link to regulator.0
[    1.046934] brd: module loaded
[    1.060716] loop: module loaded
[    1.066938] libphy: Fixed MDIO Bus: probed
[    1.138543] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1
[    1.146244] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.153745] libphy: 4a101000.mdio: probed
[    1.157791] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driv
[    1.168391] cpsw 4a100000.ethernet: Detected MACID = 9c:1d:58:7c:b5:91
[    1.175059] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[    1.181450] cpsw 4a100000.ethernet: ALE Table size 1024
[    1.186748] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies)
[    1.195629] i2c /dev entries driver
[    1.200665] sdhci: Secure Digital Host Controller Interface driver
[    1.206880] sdhci: Copyright(c) Pierre Ossman
[    1.212944] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.2
[    1.245499] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.256359] NET: Registered protocol family 10
[    1.262415] Segment Routing with IPv6
[    1.266182] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.272893] NET: Registered protocol family 17
[    1.277658] Key type dns_resolver registered
[    1.282217] omap_voltage_late_init: Voltage driver support not added
[    1.289562] Loading compiled-in X.509 certificates
[    1.309544] GPIO line 119 (SelEMMCorNAND) hogged as output/low
[    1.316492] GPIO line 136 (SelLCDorHDMI) hogged as output/low
[    1.323254] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.328429] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.336107] nand: No NAND device found
[    1.368637] tps65218 0-0024: Failed to set masks in 0x3: -121
[    1.374547] tps65218: probe of 0-0024 failed with error -121
[    1.380617] omap_i2c 44e0b000.i2c: bus 0 rev0.12 at 100 kHz
[    1.408717] sii902x: probe of 1-003b failed with error -121
[    1.414460] omap_i2c 4802a000.i2c: bus 1 rev0.12 at 100 kHz
[    1.420639] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not foun
[    1.429997] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0
[    1.436926] omapdss_dss 4832a000.dss: Dropping the link to regulator.0
[    1.444346] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000
[    1.453107] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.458417] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
[    1.491542] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not foun
[    1.500904] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0
[    1.507838] omapdss_dss 4832a000.dss: Dropping the link to regulator.0
[    1.515144] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not foun
[    1.524498] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0
[    1.531424] omapdss_dss 4832a000.dss: Dropping the link to regulator.0
[    1.538982] hctosys: unable to open rtc device (rtc0)
[    1.544911] vmmcwl_fixed: disabling
[    1.548429] ALSA device list:
[    1.551464]   No soundcards found.
[    1.556200] Waiting for root device PARTUUID=081ada1d-02...
[    1.581370] mmc1: host does not support reading read-only switch, assuming wr
[    1.592467] mmc1: new high speed SDHC card at address 0007
[    1.599404] mmcblk1: mmc1:0007 SD08G 7.42 GiB
[    1.605795]  mmcblk1: p1 p2
[    1.610280] omapdss_dss 4832a000.dss: 4832a000.dss supply vdda_video not foun
[    1.619657] omapdss_dss 4832a000.dss: Linked as a consumer to regulator.0
[    1.626597] omapdss_dss 4832a000.dss: Dropping the link to regulator.0
[    2.017464] EXT4-fs (mmcblk1p2): recovery complete
[    2.022319] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. O
[    2.030514] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.037424] devtmpfs: error mounting -2
[    2.043148] Freeing unused kernel memory: 1024K
[    2.047828] Run /sbin/init as init process
[    2.051999] Run /etc/init as init process
[    2.056044] Run /bin/init as init process
[    2.060095] Run /bin/sh as init process
[    2.063959] Kernel panic - not syncing: No working init found.  Try passing i

Could you please indicate me what I am doing wrong ? Or what I am missing ?

Thank you in advance,

Regards, Gilles

Part Number: PROCESSOR-SDK-AM65X

Tool/software: Linux

Hi,

I've got a build issue with the new processor SDK 06.00.00.07 building the image "arago-core-tisdk-image".

1. I setup the build environment as described here:

I've got a problem with package u-boot-k3-r5:

ewtd@VMTDSRV:~/tisdk/build/conf$ MACHINE=am65xx-evm bitbake u-boot-k3-r5
WARNING: Layer meta-processor-sdk should set LAYERSERIES_COMPAT_meta-processor-sdk in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: Layer browser-layer should set LAYERSERIES_COMPAT_browser-layer in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: Layer meta-processor-sdk should set LAYERSERIES_COMPAT_meta-processor-sdk in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: Layer browser-layer should set LAYERSERIES_COMPAT_browser-layer in its conf/layer.conf file to list the core layer names it is compatible with.
WARNING: You have included the meta-virtualization layer, but 'virtualization' has not been enabled in your DISTRO_FEATURES. Some bbappend files may not take effect. See the meta-virtualization README for details on enabling virtualization support.
Loading cache: 100% |#######################################################################################################################################| Time: 0:00:04
Loaded 4858 entries from dependency cache.
WARNING: No recipes available for:
  /home/ewtd/tisdk/sources/meta-processor-sdk/recipes-graphics/wayland/weston_2.0.0.bbappend
  /home/ewtd/tisdk/sources/meta-processor-sdk/recipes-ros/navigation/move-base_1.12.14.bbappend
  /home/ewtd/tisdk/sources/meta-processor-sdk/recipes-ros/navigation/rotate-recovery_1.12.14.bbappend
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.40.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-18.04"
TARGET_SYS           = "aarch64-linux"
MACHINE              = "am65xx-evm"
DISTRO               = "arago"
DISTRO_VERSION       = "2019.05"
TUNE_FEATURES        = "aarch64"
TARGET_FPU           = ""
meta-processor-sdk   = "HEAD:e5b633c0aa6d924ab6bea15906e3790c01c86633"
meta-ros             = "HEAD:72068b17e4192b51e09c8dc633805a35edac8701"
meta-arago-distro    
meta-arago-extras    = "HEAD:9373674c699c8ad98f8b6b3eac45473448f55e94"
meta-browser         = "HEAD:26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5             = "HEAD:1520d5b2b2beec5e1c3209d3178219e93ef08bca"
meta-virtualization  = "HEAD:bbc38dc9d6d02e73c08df289bb22a292c2264e9b"
meta-networking      
meta-python          
meta-oe              
meta-gnome           
meta-multimedia      
meta-filesystems     = "HEAD:9b3b907f30b0d5b92d58c7e68289184fda733d3e"
meta-ti              = "HEAD:28a2f128fbadd37463060eb5ee40c7c9a47cc530"
meta-linaro-toolchain 
meta-optee           = "HEAD:b30036d4ef7ce9fe746833fc54de6ac7b0e00638"
meta                 = "HEAD:f162d5bfe6eaeca24f441c83c87252c8d05744fc"

Initialising tasks: 100% |##################################################################################################################################| Time: 0:00:02
Sstate summary: Wanted 26 Found 19 Missed 7 Current 209 (73% match, 97% complete)
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: u-boot-k3-r5-2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3 do_compile: oe_runmake failed
ERROR: u-boot-k3-r5-2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3 do_compile: Function failed: do_compile (log file is located at /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/temp/log.do_compile.49091)
ERROR: Logfile of failure stored in: /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/temp/log.do_compile.49091
Log data follows:
| DEBUG: Executing shell function do_compile

The do_compile log looks as following:

| DEBUG: Executing shell function do_compile
| NOTE: make -j 24 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- CC=arm-linux-gnueabihf-gcc  --sysroot=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot V=1 HOSTCC=gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1 -C /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git O=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build am65x_evm_r5_defconfig
| make: Entering directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git'
| make -C /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build KBUILD_SRC=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git \
| -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/Makefile am65x_evm_r5_defconfig
| make[1]: Entering directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build'
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.build obj=scripts/basic
| ln -fsn /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git source
| /bin/sh /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/mkmakefile \
|     /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git . 2019 01
|   GEN     ./Makefile
|   gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1 -Wp,-MD,scripts/basic/.fixdep.d -Iscripts/basic -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu11 -o scripts/basic/fixdep /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/basic/fixdep.c
| rm -f .tmp_quiet_recordmcount
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.build obj=scripts/kconfig am65x_evm_r5_defconfig
|   bison -oscripts/kconfig/zconf.tab.c -t -l /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/kconfig/zconf.y
|   gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1 -Wp,-MD,scripts/kconfig/.conf.o.d -Iscripts/kconfig -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu11 -DCURSES_LOC="<curses.h>" -DLOCALE -c -o scripts/kconfig/conf.o /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/kconfig/conf.c
|   flex -oscripts/kconfig/zconf.lex.c -L /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/kconfig/zconf.l
|   gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1 -Wp,-MD,scripts/kconfig/.zconf.tab.o.d -Iscripts/kconfig -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu11 -DCURSES_LOC="<curses.h>" -DLOCALE  -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/kconfig -Iscripts/kconfig -c -o scripts/kconfig/zconf.tab.o scripts/kconfig/zconf.tab.c
|   gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1  -o scripts/kconfig/conf scripts/kconfig/conf.o scripts/kconfig/zconf.tab.o
| scripts/kconfig/conf  --defconfig=arch/../configs/am65x_evm_r5_defconfig Kconfig
| #
| # configuration written to .config
| #
| make[1]: Leaving directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build'
| make: Leaving directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git'
| NOTE: make -j 24 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- CC=arm-linux-gnueabihf-gcc  --sysroot=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot V=1 HOSTCC=gcc  -isystem/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/include -O2 -pipe -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -L/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath-link,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/usr/lib -Wl,-rpath,/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot-native/lib -Wl,-O1 -C /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git O=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build all
| make: Entering directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git'
| make -C /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build KBUILD_SRC=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git \
| -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/Makefile all
| make[1]: Entering directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build'
| make[1]: arm-linux-gnueabihf-gcc: Command not found
| /bin/sh: arm-linux-gnueabihf-gcc: command not found
| dirname: missing operand
| Try 'dirname --help' for more information.
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/Makefile syncconfig
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.build obj=scripts/basic
| ln -fsn /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git source
| /bin/sh /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/mkmakefile \
|     /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git . 2019 01
| rm -f .tmp_quiet_recordmcount
|   GEN     ./Makefile
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.build obj=scripts/kconfig syncconfig
| mkdir -p include/config include/generated
| scripts/kconfig/conf  --syncconfig Kconfig
| make -f /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.autoconf || \
|       { rm -f include/config/auto.conf; false; }
| /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/binutils-version.sh: line 18: arm-linux-gnueabihf-as: command not found
| mkdir -p include/asm
| if [ -d /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/arch/arm/mach-k3/include/mach ]; then    \
|       dest=arch/arm/mach-k3/include/mach;                     \
| else                                                                  \
|       dest=arch/arm/include/asm/arch-k3;      \
| fi;                                                                   \
| ln -fsn /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/$dest include/asm/arch
| set -e; : '  CHK     include/config.h'; mkdir -p include/;    (echo "/* Automatically generated - do not edit */"; for i in $(echo "" | sed 's/,/ /g'); do echo \#define CONFIG_$i | sed '/=/ {s/=/      /;q; } ; { s/$/ 1/; }'; done; echo \#define CONFIG_BOARDDIR board/ti/am65x; echo \#include \<config_defaults.h\>; echo \#include \<config_uncmd_spl.h\>; echo \#include \<configs/"am65x_evm".h\>; echo \#include \<asm/config.h\>; echo \#include \<linux/kconfig.h\>; echo \#include \<config_fallbacks.h\>;) < /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.autoconf > include/config.h.tmp; if [ -r include/config.h ] && cmp -s include/config.h include/config.h.tmp; then rm -f include/config.h.tmp; else : '  UPD     include/config.h'; mv -f include/config.h.tmp include/config.h; fi
| mkdir -p spl/
|   arm-linux-gnueabihf-gcc  --sysroot=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot -x c -DDO_DEPS_ONLY -M -MP -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -std=gnu11 -fshort-wchar -fno-strict-aliasing  -O2    -g    -D__KERNEL__ -D__UBOOT__   -D__ARM__                -ffunction-sections -fdata-sections -fno-common -ffixed-r9     -fno-optimize-sibling-calls -pipe -Iinclude  -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/arch/arm/include -include /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/linux/kconfig.h  -nostdinc -isystem  -MQ include/config/auto.conf /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/common.h > include/autoconf.mk.dep || { rm include/autoconf.mk.dep; false; }
|   arm-linux-gnueabihf-gcc  --sysroot=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot -E -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -std=gnu11 -fshort-wchar -fno-strict-aliasing  -O2    -g    -D__KERNEL__ -D__UBOOT__   -D__ARM__                -ffunction-sections -fdata-sections -fno-common -ffixed-r9     -fno-optimize-sibling-calls -pipe -Iinclude  -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/arch/arm/include -include /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/linux/kconfig.h  -nostdinc -isystem   -DDO_DEPS_ONLY -dM /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/common.h > u-boot.cfg.tmp && { grep 'define CONFIG_' u-boot.cfg.tmp > u-boot.cfg; rm u-boot.cfg.tmp; } || { rm u-boot.cfg.tmp; false; }
| /bin/sh: arm-linux-gnueabihf-gcc: command not found
| /bin/sh: arm-linux-gnueabihf-gcc: command not found
|   arm-linux-gnueabihf-gcc  --sysroot=/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/recipe-sysroot -E -Wall -Wstrict-prototypes -Wno-format-security -fno-builtin -ffreestanding -std=gnu11 -fshort-wchar -fno-strict-aliasing  -O2    -g    -D__KERNEL__ -D__UBOOT__   -D__ARM__                -ffunction-sections -fdata-sections -fno-common -ffixed-r9     -fno-optimize-sibling-calls -pipe -Iinclude  -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include -I/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/arch/arm/include -include /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/linux/kconfig.h  -nostdinc -isystem  -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/include/common.h > spl/u-boot.cfg.tmp && { grep 'define CONFIG_' spl/u-boot.cfg.tmp > spl/u-boot.cfg; rm spl/u-boot.cfg.tmp; } || { rm spl/u-boot.cfg.tmp; false; }
| /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.autoconf:48: recipe for target 'include/autoconf.mk.dep' failed
| make[2]: *** [include/autoconf.mk.dep] Error 1
| make[2]: *** Waiting for unfinished jobs....
| /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.autoconf:77: recipe for target 'u-boot.cfg' failed
| make[2]: *** [u-boot.cfg] Error 1
| /bin/sh: arm-linux-gnueabihf-gcc: command not found
| /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git/scripts/Makefile.autoconf:80: recipe for target 'spl/u-boot.cfg' failed
| make[2]: *** [spl/u-boot.cfg] Error 1
| make[1]: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/uboot.release'.  Stop.
| make[1]: Leaving directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/build'
| Makefile:148: recipe for target 'sub-make' failed
| make: *** [sub-make] Error 2
| make: Leaving directory '/home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/git'
| ERROR: oe_runmake failed
| WARNING: /home/ewtd/tisdk/build/arago-tmp-external-arm-toolchain/work/am65xx_evm-linux/u-boot-k3-r5/2019.01+gitAUTOINC+8b90adfb16-r13.tisdk3/temp/run.do_compile.49091:1 exit 1 from 'exit 1'

I don't understand why  the error "arm-linux-gnueabihf-gcc: command not found" pops up. The command should be known according my PATH variable:

ewtd@VMTDSRV:~/tisdk/build/conf$ echo $PATH
/opt/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf/bin:/home/ewtd/tisdk/sources/meta-browser/scripts:/home/ewtd/tisdk/sources/meta-ros/scripts:/home/ewtd/tisdk/sources/oe-core/scripts:/home/ewtd/tisdk/sources/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
ewtd@VMTDSRV:~/tisdk/build/conf$ arm-linux-gnueabihf-gcc
arm-linux-gnueabihf-gcc: fatal error: no input files
compilation terminated.
ewtd@VMTDSRV:~/tisdk/build/conf$ which arm-linux-gnueabihf-gcc
/opt/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-gcc
ewtd@VMTDSRV:~/tisdk/build/conf$ 

With configuration "processor-sdk-05.03.00.07-config.txt" the built just runs fine.

Can anyone help me or give me a hint in the right direction?

Best Regards!

Part Number: AM5728

Tool/software: TI-RTOS

Hello,

I would like some assistance to start coding on my custom board based on a SOC AM5728. I received the prototype boards few weeks ago, and I made some good progress in term of hardware debugging.

I already checked :

- The power supplies sequences at bootup. Everythinks looks like the recommandations

- The system boot configuration is correct. I verified the value of the boot pins in the corresponding register via FTDI emulation "CTRL_CORE_BOOTSTRAP"

The remaining tasks are (where I needs assistance):

- Test the system clock : The 20MHz oscillator is good, but I don't know how to use the clock tree tool. Does this tool generate some code?

- DDR initialisation: I filled the DDR spreadsheet according to my specific layout and the DDR datasheet. It generate some  "U-boot" and "gel file" output code but I don't know where to use it.

Actually, to begin, I just want to use the diagnostic source code "LED_TEST" provided in the PDK to manage my own LED on my boards. For this, I followed the guide and performed the followings steps:

1. Re build a custom library

- I used the pinmux tool that generated some sources files.

- I copy past the evm572x folder, renamed it as "MasterNxG" board, included the pinmux source files previously generated, and follow the procedure provided by TI

- recompiled the library to get the "ti.board.aa15fg". That's ok!

2. Re build a diagnostic Test LED specific for my board, after followed the procedure provided by TI

- I copy past the "TEST_LED" folder and modified the makefiles to fit with my board,

- I get the .out after compilation. That's ok!

After launching the target config corresponding to my board in CCS, and connect the A15_0 CPU, I load the generated .out file, I get the following error:

"CortexA15_0: File Loader: Verification failed: Values at address 0x80000000 do not match Please verify target memory and memory map.
CortexA15_0: GEL: File: C:\ti\pdk_am57xx_1_0_14\packages\ti\board\bin\MasterNxG\armv7\led_Test_diagExample_MasterNxG_armv7.out: a data verification error occurred, file load failed."

Could you please give me some assistance? I think DDR and clock config are part of the most important think to do but I don't know how.?

Thanks in advance.

Sylvain.

Part Number: AM3352

Does AM3352 ADC have clamp? when input signal level larger than Vref, will it clamp to Vref? or need to add external clamp circuit?

Part Number: TDA2SX

Tool/software: Linux

Our system does not have enough shared memory to do more algorithm,

So we want to adjust the memory block position & size for increasing the SR1 size.

After reading the URL http://processors.wiki.ti.com/index.php/VSDK/VisionSDK_UserGuide_MemoryMap#Memory_Map_of_the_Application, our adjustments are still fail.

Even we only move the IPU1 & IPU2 position & size. ( not out of 0xA0000000 )

Could you help us ?

Thank you very much.

Regards,

Eten

Part Number: SM320C6678-HIREL

Dear TI,

I need to understand the Smart reflex core voltage. 

1. How to reduce device power consumption?
2. How to scale/ optimize  the core voltage?
3. schematic is attached for your review..  VID outputs of SM320C6678 are connected LM10011 and Enable control of LM10011 is connected to CPLD.  Is these connections are correct?
4. When CPLD has to switch-on LM10011. What will be the CVDD voltage?

Regards

Nrupathunga

(Please visit the site to view this file)

Part Number: AM4376

Tool/software: Linux

Hi SIr 

We used  ti-processor-sdk-linux-am437x-evm-05.00.00.15 for development and connected TTL signal to ADV7125 DAC for VGA output.

And we set 1024x768/@60 output and found the picture lost some horizontal lines in the right half of the picture.

below is the picture and dts setting.

                panel-timing {

                        clock-frequency = <65000000>;

                        hactive = <1024>;

                        vactive = <768>;

                        hfront-porch = <24>;

                        hback-porch = <160>;

                        hsync-len = <136>;

                        vback-porch = <29>;

                        vfront-porch = <3>;

                        vsync-len = <6>;

                        hsync-active = <0>;

                        vsync-active = <0>;

                        de-active = <1>;

                        pixelclk-active = <1>;

                };

BTW, we also modified the parameter of hfront-porch and hback-porch.  it seems no help and only cause the picture shift.

It seems some RGB signal got lost and caused this issue.

Does TI expert have any suggestion for this or any DSS register to improve this phenomenon ?

BR

Yimin 

Part Number: DRA77P

Tool/software: Linux

Hi,

Previously I was bringing up the mmc3 interface (for wifi module) in dra77x with kernel version 4.4  processor sdk linux automotive v5_00_00_01 and was successful in it.

On porting to v4.14, I find some trouble in bringing it up on applying the previous changes of device tree file here.

On inserting the driver the following messages comes up,

wlan: Loading MWLAN driver
[   48.754770] vendor=0x02DF device=0x9135 class="0" function=1
[   48.755562] SDIO: max_segs=128 max_seg_size=65536
[   48.755569] rx_work=1 cpu_num=2
[   48.759056] wlan: Enable TX SG mode
[   48.759062] wlan: Enable RX SG mode
[   48.772731] Request firmware: mrvl/sduart8887_combo_a2.bin
[   49.911609] mmc2: Timeout waiting for hardware interrupt.
[   49.911616] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[   49.911624] mmc2: sdhci: Sys addr:  0xae0e0010 | Version:  0x00003302
[   49.911631] mmc2: sdhci: Blk size:  0x00000100 | Blk cnt:  0x00000001
[   49.911637] mmc2: sdhci: Argument:  0x92000100 | Trn mode: 0x00000003
[   49.911643] mmc2: sdhci: Present:   0x01f00506 | Host ctl: 0x00000002
[   49.911649] mmc2: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
[   49.911655] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000c07
[   49.911660] mmc2: sdhci: Timeout:   0x00000007 | Int stat: 0x00000000
[   49.911666] mmc2: sdhci: Int enab:  0x027f010b | Sig enab: 0x027f010b
[   49.911672] mmc2: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
[   49.911677] mmc2: sdhci: Caps:      0x25e10080 | Caps_1:   0x00000f77
[   49.911683] mmc2: sdhci: Cmd:       0x0000353a | Max curr: 0x00000000
[   49.911688] mmc2: sdhci: Resp[0]:   0x00002000 | Resp[1]:  0x00000000
[   49.911694] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[   49.911699] mmc2: sdhci: Host ctl2: 0x00000000
[   49.911703] mmc2: sdhci: ============================================
[   49.911803] cmd53 write error=-110
[   49.911973] WLAN: FW download, write iomem (0) failed @ 0
[   49.912263] wlan_dnld_fw fail ret=0xffffffff
[   49.912270] WLAN: Fail download FW with nowwait: 0
[   49.915065] SDIO Func0 (0x0-0x9): 43 03 02 02 03 00 00 02 03 00 
[   49.917225] SDIO Func1 (0x10-0x17): 00 00 00 00 00 00 00 00 
[   49.920754] SDIO Func1: (0x8) 00 (0x58) 00 (0x5c) 0d (0x5d) 00 (0x60) 01 (0x61) 00 (0x62) 00 (0x64) 10 (0x65) 01 (0x66) 00 (0x68) 00 (0x69) 00 (0x6a) 00 
[   49.923840] SDIO Func1 (0x90-0x9a): 00 00 00 00 00 00 00 00 00 00 00 
[   50.026560] SDIO Func1 (0x90-0x9a): 00 00 00 00 00 00 00 00 00 00 00 
[   50.026626] woal_request_fw failed
[   50.026629] Firmware Init Failed
[   50.031862] woal_add_card failed
[   50.032403] wlan_sdio: probe of mmc2:0001:1 failed with error -1
[   50.033512] wlan: Driver loaded successfully

What changes might be required in this version of kernel ?

I tried applying the exact changes from dra7.dtsi, dra76-evm.dts and dra76x-mmc-iodelay.dtsi from prev. version to the latest version, but still couldnt find any hope.

Regards,

Padmesh

Part Number: TMDX654IDKEVM

Tool/software: Linux

Hello,

I'm trying to boot RTOS (R5F) and Linux (A53) independently ,

Something like picture below: 

Best regards!

Part Number: AM5728

Tool/software: TI-RTOS

Hi

Am using the i2c interface between the dsp and slave.

I want to write data to the address present in sequential which is of 4bytes, e.g 0x0001,0x0002,0x0003,0x0004.

how can i write without closing the i2c bus or stop bit.

i thought of repeated start how can i implement any suggestions regarding this.

Thanks 

Mr. 

Part Number: TDA2SX

Tool/software: Linux

Hello all,

                        We are working on a custom board based on tda2sx.We have interfaced  tlv320adc3101 and mcasp6,While trying to record with arecord command we are getting the following errors.

 root@dra7xx-evm:~# arecord -Dhw:0,0 -f S16_LE -r 48000 -t wav -d 10 -c 2 audio.wav                                                              
Recording WAVE 'audio.wav' : Signed 16 bit Lirate 8000 sysclk 11289473 divs_rate 8000 divs_sysclk 19200000
ttle Endian, Rate 48000 Hz, Stereo
Warning: ratrate 8000 sysclk 11289473 divs_rate 11025 divs_sysclk 19200000
e is not accurate (requested = 48000Hz, got = 80rate 8000 sysclk 11289473 divs_rate 44100 divs_sysclk 19200000
00Hz)
         please, try the plug plugin
rate 8000 sysclk 11289473 divs_rate 48000 divs_sysclk 19200000
adc3101: sample rate is not supported
adc3101: sampling rate not supported
tlv320adc3101-codec 0-001b: ASoC: can't set tlv320adc3101-hifi hw params: -22
arecord: set_params:1297: Unable to install hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 32
CHANNELS: 2
RATE: 8000
PERIOD_TIME: 125000
PERIOD_SIZE: 1000
PERIOD_BYTES: 4000
PERIODS: 4
BUFFER_TIME: 500000
BUFFER_SIZE: 4000
BUFFER_BYTES: 16000
TICK_TIME: 0

                            We have configured codec as slave in dts.

snd1: sound@0 {
               compatible = "simple-audio-card";
               simple-audio-card,name = "DRA7xx-EVM-snd1";
               simple-audio-card,widgets =
                       "Line", "Line In";
               simple-audio-card,routing =
                       "IN2_R",                "Line In",
                       "IN3_R",                "Line In",
                       "IN2_L",                "Line In",
                       "IN3_L",                "Line In";
               simple-audio-card,format = "i2s";
               simple-audio-card,bitclock-master = <&sound0_master>;
               simple-audio-card,frame-master = <&sound0_master>;
               simple-audio-card,bitclock-inversion;

               sound0_master: simple-audio-card,cpu {
                       /* sound-dai = <&mcasp4>;*/
                      sound-dai = <&mcasp6>;
                      system-clock-frequency = <19200000>;
               };

               simple-audio-card,codec {
                       sound-dai = <&tlv320adc3101>;
                        clocks = <&atl_clkin2_ck>;
/*                       bitclock-master;
                       frame-master;
                       bitclock-inversion;
                       system-clock-frequency = <19200000>;
*/               };
        };

&atl {
        assigned-clocks = <&abe_dpll_sys_clk_mux>,
                          <&atl_gfclk_mux>,
                          <&dpll_abe_ck>,
                          <&dpll_abe_m2x2_ck>,
                          <&atl_clkin1_ck>,
                          <&atl_clkin2_ck>;
/*      assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;*/
        assigned-clock-parents = <&sys_clkin1>, <&dpll_abe_m2_ck>;/*added by murugan.s@fossilshale.com*/
        assigned-clock-rates = <0>, <0>, <180633600>, <361267200>,
                                <11289600>, <11289600>;

        status = "okay";

        atl2 {
                bws = <DRA7_ATL_WS_MCASP2_FSX>;
                aws = <DRA7_ATL_WS_MCASP3_FSX>;
        };

};

&mcasp6 {
        #sound-dai-cells = <0>;

        status = "okay";
        assigned-clocks = <&mcasp6_ahclkx_mux>;
        assigned-clock-parents = <&atl_clkin2_ck>;

/*      status = "disabled"; */

        pinctrl-names = "default";
        pinctrl-0 = <&adc_mcasp6_master>;
        /*pinctrl-0 = <&adc_mcasp6_slave>;*/

        op-mode = <0>;          /* MCASP_IIS_MODE */
        tdm-slots = <2>;
        /* 4 serializer */
        serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
                2 0 0 0
        >;
        tx-num-evt = <32>;
        rx-num-evt = <32>;
};

dtb file:

(Please visit the site to view this file)

                                                      What could be the issue? We are able to see MCLK of 19.2MHz .

Regards,

Murugan S

Part Number: TDA2EVM5777

Tool/software: Linux

Hi.

I am working on creating a new OpenCV algorithm that works on the A15 core.

First, I built the new MYAPP with the OpenCV Canny algorithm.

However, OpenCV does not work in Usecase.

The link structure of UC is as follows.

NullSrc (A15) -> Decode -> VPE -> Alg_OpenCVCanny (A15) -> Sgx_Frmcpy (A15) -> Display

(I used NullSrc because I do not have a camera.)

The setting of UC was the same with NullSrcDecDisplay and vip_single_cam_opencvcanny_sgx_display UC.

The process of running UC is as follows.
1. cd / opt / vision_sdk
2. source ./vision_sdk_load.sh
3. ./myapp.out

Here are some of my log messages:

[HOST] [IPU2 ] 93.722534 s:
[HOST] [IPU2 ] 93.722564 s: [ IPC_OUT_0 ] Link Statistics,
[HOST] [IPU2 ] 93.722625 s: ******************************
[HOST] [IPU2 ] 93.722686 s:
[HOST] [IPU2 ] 93.722747 s: Elapsed time = 3490 msec
[HOST] [IPU2 ] 93.722808 s:
[HOST] [IPU2 ] 93.722839 s: New data Recv = 31.51 fps
[HOST] [IPU2 ] 93.722930 s: Release data Recv = 31.51 fps
[HOST] [IPU2 ] 93.722991 s: Driver/Notify Cb = 64.75 fps
[HOST] [IPU2 ] 93.723083 s:
[HOST] [IPU2 ] 93.723144 s: Input Statistics,
[HOST] [IPU2 ] 93.723205 s:
[HOST] [IPU2 ] 93.723235 s: CH | In Recv | In Drop | In User Drop | In Process
[HOST] [IPU2 ] 93.723327 s: | FPS | FPS | FPS | FPS
[HOST] [IPU2 ] 93.723388 s: --------------------------------------------------
[HOST] [IPU2 ] 93.723479 s: 0 | 31.51 0. 0 0. 0 31.51
[HOST] [IPU2 ] 93.723601 s:
[HOST] [IPU2 ] 93.723662 s: Output Statistics,
[HOST] [IPU2 ] 93.723723 s:
[HOST] [IPU2 ] 93.723754 s: CH | Out | Out | Out Drop | Out User Drop
[HOST] [IPU2 ] 93.723815 s: | ID | FPS | FPS | FPS
[HOST] [IPU2 ] 93.723906 s: ---------------------------------------------
[HOST] [IPU2 ] 93.723967 s: 0 | 0 31.51 0. 0 0. 0
[HOST] [IPU2 ] 93.724120 s:
[HOST] [HOST ] 93.725401 s:
[HOST] [HOST ] 93.725431 s: [ IPC_IN_0 ] Link Statistics,
[HOST] [HOST ] 93.725431 s: ******************************
[HOST] [HOST ] 93.725431 s:
[HOST] [HOST ] 93.725431 s: Elapsed time = 3493 msec
[HOST] [HOST ] 93.725431 s:
[HOST] [HOST ] 93.725462 s: Get Full Buf Cb = 31.49 fps
[HOST] [HOST ] 93.725462 s: Put Empty Buf Cb = 31.49 fps
[HOST] [HOST ] 93.725462 s: Driver/Notify Cb = 31.20 fps
[HOST] [HOST ] 93.725462 s:
[HOST] [HOST ] 93.725462 s: Input Statistics,
[HOST] [HOST ] 93.725492 s:
[HOST] [HOST ] 93.725492 s: CH | In Recv | In Drop | In User Drop | In Process
[HOST] [HOST ] 93.725492 s: | FPS | FPS | FPS | FPS
[HOST] [HOST ] 93.725492 s: --------------------------------------------------
[HOST] [HOST ] 93.725492 s: 0 | 31.49 0. 0 0. 0 31.49
[HOST] [HOST ] 93.725523 s:
[HOST] [HOST ] 93.725523 s: Output Statistics,
[HOST] [HOST ] 93.725523 s:
[HOST] [HOST ] 93.725523 s: CH | Out | Out | Out Drop | Out User Drop
[HOST] [HOST ] 93.725523 s: | ID | FPS | FPS | FPS
[HOST] [HOST ] 93.725523 s: ---------------------------------------------
[HOST] [HOST ] 93.725553 s: 0 | 0 31.49 0. 0 0. 0
[HOST] [HOST ] 93.725553 s:
[HOST] [HOST ] 93.725645 s:
[HOST] [HOST ] 93.725675 s: [ ALG_OPENCVCANNY ] Link Statistics,
[HOST] [HOST ] 93.725675 s: ******************************
[HOST] [HOST ] 93.725675 s:
[HOST] [HOST ] 93.725675 s: Elapsed time = 3492 msec
[HOST] [HOST ] 93.725675 s:
[HOST] [HOST ] 93.725706 s: In Buf Error Count = 110 frames
[HOST] [HOST ] 93.725706 s: New data Recv = 31.21 fps
[HOST] [HOST ] 93.725706 s:
[HOST] [HOST ] 93.725706 s: Input Statistics,
[HOST] [HOST ] 93.725706 s:
[HOST] [HOST ] 93.725706 s: CH | In Recv | In Drop | In User Drop | In Process
[HOST] [HOST ] 93.725736 s: | FPS | FPS | FPS | FPS
[HOST] [HOST ] 93.725736 s: --------------------------------------------------
[HOST] [HOST ] 93.725736 s: 0 | 31.50 0. 0 0. 0 0. 0
[HOST] [HOST ] 93.725736 s:
[HOST] [HOST ] 93.725767 s: Output Statistics,
[HOST] [HOST ] 93.725767 s:
[HOST] [HOST ] 93.725767 s: CH | Out | Out | Out Drop | Out User Drop
[HOST] [HOST ] 93.725767 s: | ID | FPS | FPS | FPS
[HOST] [HOST ] 93.725767 s: ---------------------------------------------
[HOST] [HOST ] 93.725828 s:
[HOST] [HOST ] 93.725858 s: [ SGXFRMCPY ] Link Statistics,
[HOST] [HOST ] 93.725858 s: ******************************
[HOST] [HOST ] 93.725858 s:
[HOST] [HOST ] 93.725858 s: Elapsed time = 3717 msec
[HOST] [HOST ] 93.725858 s:
[HOST] [HOST ] 93.725889 s:
[HOST] [HOST ] 93.725889 s: Input Statistics,
[HOST] [HOST ] 93.725889 s:
[HOST] [HOST ] 93.725889 s: CH | In Recv | In Drop | In User Drop | In Process
[HOST] [HOST ] 93.725889 s: | FPS | FPS | FPS | FPS
[HOST] [HOST ] 93.725889 s: --------------------------------------------------
[HOST] [HOST ] 93.725950 s:
[HOST] [IPU2 ] 93.728878 s: [ DISPLAY ] Link Statistics,
[HOST] [IPU2 ] 93.728939 s: ******************************
[HOST] [IPU2 ] 93.729000 s:
[HOST] [IPU2 ] 93.729061 s: Elapsed time = 3669 msec
[HOST] [IPU2 ] 93.729152 s:
[HOST] [IPU2 ] 93.729183 s:
[HOST] [IPU2 ] 93.729244 s: Input Statistics,
[HOST] [IPU2 ] 93.729305 s:
[HOST] [IPU2 ] 93.729335 s: CH | In Recv | In Drop | In User Drop | In Process
[HOST] [IPU2 ] 93.729396 s: | FPS | FPS | FPS | FPS
[HOST] [IPU2 ] 93.729488 s: --------------------------------------------------
[HOST] [IPU2 ] 93.729579 s:
[HOST] [IPU2 ] 93.729610 s: Output Statistics,
[HOST] [IPU2 ] 93.729671 s:
[HOST] [IPU2 ] 93.729732 s: CH | Out | Out | Out Drop | Out User Drop
[HOST] [IPU2 ] 93.729793 s: | ID | FPS | FPS | FPS
[HOST] [IPU2 ] 93.729854 s: ---------------------------------------------
[HOST] [IPU2 ] 93.730067 s:
[HOST] [IPU2 ] 93.730128 s: [ DISPLAY ] LATENCY,
[HOST] [IPU2 ] 93.730281 s: ********************
[HOST] [IPU2 ] 93.730342 s:
[HOST] [IPU2 ] 93.730403 s:
[HOST] [IPU2 ] 93.730433 s: [ DISPLAY VID1 ] Additional Statistics,
[HOST] [IPU2 ] 93.730525 s: ************************************
[HOST] [IPU2 ] 93.730586 s: Driver Queued = 0 frames
[HOST] [IPU2 ] 93.730647 s: Driver De-Queued = 0 frames
[HOST] [IPU2 ] 93.730708 s: Driver Displayed = 0 frames
[HOST] [IPU2 ] 93.730769 s: Driver Repeated = 0 frames
[HOST] [IPU2 ] 93.730860 s:
[HOST] [IPU2 ] 93.730891 s: ##### DSS DISPC Underflow Count = 0 #####
[HOST] [IPU2 ] 93.730982 s:
[HOST] [HOST ] 93.705057 s:

What did I do wrong?

Help me.

Regrds,

Lee.

Part Number: AM5718

Tool/software: Linux

Hi, 

I am using AM5718 IDK EVM,and ti-processor-sdk-linux-am57xx-evm-05.03.00.07.

I'm connecting a switch to J51 to check debouncing in GPIO. GPIO2_22 (GPIO no 54) is used here.

When I insert the driver with the call, 

 int_Result = gpio_set_debounce(54, 30);

 I get kernel error which is given in the attached file.

As I understand, function clock needs to be enabled for GPIO to activate debouncing.

If I write the value to enable function clock to the appropriate register (addr = 0x4A009760, Value = 0x20101), it is working. ( gpio_set_debounce(54, 30); does not give any error and it seems debounce is enabled).

Please tell me how to enable function clock for GPIO debounce (Please visit the site to view this file) through linux?

regards,

Anupama

Tool/software: TI C/C++ Compiler

I got a probleam with My DSK kit...so i am using simulator version.while using simulator version i am trying to create Timer using C language.but i am not able do it...

so does anybody have C Code for Timer or Any Source where i can look after ?