I wanted to write the boot file(*.bin) in NOR Flash by using a PC.
I wanted to write the boot file(*.bin) in NOR Flash by using a PC.I succeeded in writing the boot file to NOR Flash using CCS.(I was used to AISgen for generate to bin.)I want to download the generated...
View ArticleClik here to view.
omap connection doubt
Dear sir,I am working with omapl137 in windows 7 with ccsv6,when i create new project i got two option arm and dsp,which one i need to select,please find the attcachment.i think dsp....thank you
View Articleomapl137 uart problem
Dear sir,I am working with omapl137 with windows 7 in ccs v6,i dumped the uart code given by texas using TI jtag,but in Device manage it is not recognising .....which driver i need to install...please...
View ArticleOMAP-L137 working with ethernet in C code (linux)
Dear all,I have a OMAP-L137 EVM. I want to send/receive some data on the Ethernet interface in C code on Linux OS. Is there any library that I can use?Jone,
View Articleomap AUDIO exaple
Dear sir,I saw that there is no standard examples given by TI for mcasp on OMAPL137..i need a small code to work on audio processing....if you have please share with me...and other thing is that why i...
View Articleomapl137 ethernet code
Dear sir,I am working with OMAPL137 with ccs v6 in windows 7,i want to work on ethernet....as we know from texas there is no standard example...where should i get the code for it.....can i get by...
View ArticleEDMA register access is too slow.
I am using EDMA to transform data beteween CPU and EMIFA to speedup the system. But It costs about 200ns to start the EDMA by EDMACC0_ESR |= 1 << 10. Here is the code:#define EDMACC0_BASE...
View Articleomapl137 audio daughter card AK4588V0
Dear sir,I am working on daughter ak4588v0,can i get the codes and procedure how to work on it.....and detail about the kit component.thank you
View ArticleOMAP L138 DSP stays in reset after flashing in SPIflash
I tried to flash a Led Blink Programm on my Custom Board with a MityDSP module which uses a OMAPL138 processor using DSP/BIOS. With the debugger it works fine, but if i flash the application the DSP...
View ArticleClik here to view.
ompal137
Dear sir,I am working with audio exapmle given by texas,but i am not getting header file "std.h and log.h"....whre can i find this....In compiler i got stdlib,stdio,....like that but not std.h".thank you
View ArticleClik here to view.
ompa l137 ,aic31_params
Dear sir,I am working with audio example,there i added all header files and other things ,but it showing error like aic31 params not defined,aic31init not defined....please go through the attachment...
View ArticleOmap-l138 mcasp CPU interrupt problem
hi, I am using Omap-l138 the ARM side. I want to use the Mcasp port in CPU interrupt mode to output audio signal through the codec.what I got is no out put at AXR11 pin. I did some debuging through...
View ArticleGPIB controller
Just wonder does TI have any GPIB controller solution or reference design?
View ArticleOMAPL137 / TMS320C6747 no audio
Hi All,I have an Example code that send audio, and is proven to work, but in my Board seems to not been working, is there any special setup that i need to do to my board?OMAP-L137 EVM Rev H and Rev G...
View ArticleClik here to view.
I2C failure - SCL glitches
Hello,In our designs we are using OMAP-L138 and seeing I2C failures. I2C0 is connected to EEPROM, Temperature sensor and to a I2C mux.Through I2C mux OMAP-L138 talks to a third-party power supply.The...
View ArticleClik here to view.
DSP cpu utilization (trace analyzer)
HI Again,I'm trying to see the dsp utilization in an OMAPL137 / TMS3206747 and tried to use the Tools > Hardware Trace Analyzer > PC Tace, it didnt work, it said an error message that was:The...
View ArticleClik here to view.
omapl137 audio example with unresolved error
Dear sir,I am working with the example "aic3106_loop_linein" standard program.....i have added the path for headers evmomapl137.h""evmomapl137_mcasp.h" "aic3106.h1)"D:\Naseer's backup\DSP FILES\OMAP...
View ArticleClik here to view.
omapl137 mcasp loopback unresolved symbols
Dear sir,I am using texas package D:\Naseer's backup\DSP FILES\OMAP L137\6862.6366.OMAPL137_McASP_EDMA_StarterWare\OMAPL137_McASP_EDMA_StarterWare\examples\evmOMAPL137\mcasp" playback program...I have...
View Articleomapl137 edma3_drv.h
Dear sir,I am trying with standard example for aic codec of omapl137,"C:\Program Files\Texas Instruments\pspdrivers_01_30_01\packages\ti\pspiom\examples\evmOMAPL137\audio\src",i have added...
View Articleomapl137 ethernet with dsk6747
Dear sir,Can i work on dsp procesor for this ethernet code in windows 7 and ccs version6...?beacause code is given for arm processor only.As i have downloaded the nsp things,it is having only for...
View Article