Part Number:AM5728
Tool/software: Linux
Hi
I have recently upgraded u-boot from v2017.01 to v2018.01 , with sdcard the images are working fine but when i tried to flash the MLO and u-boot.img into emmc I'm not able to boot the board.
Below is the log when booting from emmc
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
U-Boot SPL 2018.01-00671-g8be0f72-dirty (Apr 02 2019 - 15:14:36)
DRA752-GP ES2.0
Trying to boot from MMC2_2
no pinctrl state for default mode
no pinctrl state for default mode
After that the board is going into hang state.
can any one help me out to debug this issue
Regards
Khaleel