Hi,
I'm working on an OMAP L138 based design. I made some changes to uboot to counteract some issues seen with ESD on the board and in the process now have a board that will not boot uboot. When I try to write a new version of uboot using loadti and SPIwriter the process fails with the error below:
$ ./flash_uboot.sh
***** DSS Generic Loader *****
START: 19:40:56 GMT-0700 (PDT)
Configuring Debug Server for specified target...
Done
TARGET: Spectrum Digital XDS510USB Emulator_0
Connecting to target...
ARM9_0: Output: Memory Map Cleared.
ARM9_0: Output: ---------------------------------------------
ARM9_0: Output: Memory Map Setup Complete.
ARM9_0: Output: ---------------------------------------------
SEVERE: ARM9_0: GEL: Error while executing OnTargetConnect(): execution state prevented access at (*((unsigned int *) (0x01C10000+0x128))&(0x1<<PD)) [DLB_BLACKFOREST_ARM.gel:987] at PSC0_LPSC_enable(0, 0) [DLB_BLACKFOREST_ARM.gel:553] at PSC_All_On_Full_EVM() [DLB_BLACKFOREST_ARM.gel:251] at OnTargetConnect() .
Resetting target...
Error code #0, could reset target!
Aborting!
What options do I have to erase the SPI flash connected to the OMAP? Is there a way to erase the flash using CCS?
For more details on the change made to uboot, please refer the case linked below;
http://goo.gl/mNLnnW
Thanks,
Dinesh