Hello
This is my configuration:
Board: EVMC6748 (I am using the TMS320C6748 DSP).
I am connected using the ethernet port to my router.
ccs: 5.4.0.00091
bios: 6_35_01_29
pspdrivers: 01_30_01
nsp: nsp_1_10_02_09
ndk: ndk_2_22_03_20
xdctools: 3_25_00_48
xgconf
I prepared BIN file using AIS according to the described in " http://software-dl.ti.com/trainingTTO/trainingTTO_public_sw/bios/BIOS_14b_Flash.pdf"
I am working based on the description in http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L138
I am trying to run the sfh tool...
sfh_OMAP-L138 -targetType C6748_LCDK -erase -p COM2 -v
I am getting the following:
[TYPE] Global erase
[TARGET] C6748_LCDK
[DEVICE] SPI_MEM
[SPI Block] 0
Attempting to connect to device COM2...
Press any key to end this program at any time.
(AIS Parse): Read magic word 0x41504954
(AIS Parse): Waiting for BOOTME... (power on or reset target now)
---
Now, I am getting the same also if I am not connecting the board to power... I mean only connecting the USB to my computer and I am getting the same, so I guess for some kind of reason we cannot speak with the device.
I tried to change the targetType to OMAPL138, OMAPL138_LCDK and C6748, it did not help.
The Dip switch configuration is all OFF except 7 and 8, ON
Any ideas?
Thanks in advance,
GBL