I have an OMAP-L138 LCDK and an XDS100v2 JTAG Emulator. I am attempting get "any" of the StarterWare for OMAP-L138 to run for ARM. I have run DSP examples . I am using CCSv5.5 . I am using the OMAPL138_ARM.gel that can be found in the StarterWare directory. I have 2 3 and 4 no. switch on LCDK switches set to on. When I debug the codes in arm, I get the following error (below). I have tried other Arm projects and get the same problem. I am not sure why.
ARM9_0: Output: Target Connected.
ARM9_0: Output: ---------------------------------------------
ARM9_0: Output: Memory Map Cleared.
ARM9_0: Output: ---------------------------------------------
ARM9_0: Output: Memory Map Setup Complete.
ARM9_0: Output: ---------------------------------------------
ARM9_0: Output: PSC Enable Complete.
ARM9_0: Output: ---------------------------------------------
ARM9_0: GEL: Error while executing OnTargetConnect(): Target failed to write 0x01C11138 at (*((unsigned int *) (0x01C11000+0x138))|=0x1) [OMAP-L138_LCDK.gel:16] at device_PLL0(0, 24, 1, 0, 1, 11, 5) [OMAP-L138_LCDK.gel:403] at Set_Core_300MHz() [OMAP-L138_LCDK.gel:468] at Core_300MHz_mDDR_150MHz() [OMAP-L138_LCDK.gel:245] at OnTargetConnect()