Part Number:TDA2EVM5777
Tool/software: TI-RTOS
I'm using PROCESSOR_SDK_VISION_03_04_00_00, and I'm trying to run the TIDL_OD usecase, but I got failed, I think the system is booted right, and here is the log from my terminal:
============
[IPU1-0] 12.652199 s: Usecase Menu
[IPU1-0] 12.652260 s: ============
[IPU1-0] 12.652290 s:
[IPU1-0]
[IPU1-0] Vision SDK Usecases,
[IPU1-0] --------------------
[IPU1-0] 1: Single Camera Usecases
[IPU1-0] 2: Multi-Camera LVDS Usecases
[IPU1-0] 3: AVB RX Usecases, (TDA2x & TDA2Ex ONLY)
[IPU1-0] 4: Dual Display Usecases, (TDA2x EVM ONLY)
[IPU1-0] 5: ISS Usecases, (TDA3x ONLY)
[IPU1-0] 6: TDA2x Stereo Usecases
[IPU1-0] 7: Network RX/TX Usecases
[IPU1-0] 9: RADAR Usecases
[IPU1-0] a: Miscellaneous test's
[IPU1-0] f: TIDL Usecase
[IPU1-0] g: Camera Radar Combo Usecases
[IPU1-0]
[IPU1-0] s: System Settings
[IPU1-0]
[IPU1-0] x: Exit
[IPU1-0]
[IPU1-0] Enter Choice:
[IPU1-0]
[IPU1-1] 16.185017 s: NETWORK_CTRL: Starting Server (port=5000) !!!
[IPU1-1] 16.185292 s: NETWORK_CTRL: Starting Server ... DONE (port=5000) !!!
[IPU1-0] 30.297779 s:
[IPU1-0] 30.297901 s:
[IPU1-0]
[IPU1-0] TIDL Usecases
[IPU1-0] ---------------
[IPU1-0] 1: TIDL File I/O Usecase
[IPU1-0] 2: Semantic Segmentation Usecase
[IPU1-0] 3: TIDL OD Usecase
[IPU1-0]
[IPU1-0] x: Exit
[IPU1-0]
[IPU1-0] Enter Choice:
[IPU1-0]
[IPU1-0] 37.662782 s:
[IPU1-0] 37.703959 s: TIDL Configuration parameters
[IPU1-0] 37.704050 s: -----------------------------
[IPU1-0] 37.704111 s: inputWidth = 768
[IPU1-0] 37.704172 s: inputHeight = 320
[IPU1-0] 37.704233 s: inputFile = inData_OD
[IPU1-0] 37.704294 s: inputFile = inHeader_OD
[IPU1-0] 37.704355 s: netFileName = tidl_net_jdetNet_ssd.bin
[IPU1-0] 37.704416 s: paramFileName = tidl_param_jdetNet_ssd.bin
[IPU1-0] 37.704508 s: inputfps = 30
[IPU1-0] 37.704569 s: threshold = 0.300000
[IPU1-0] 37.704691 s: -----------------------------
[IPU1-0] 38.753675 s: Assertion @ Line: 1364 in nullSrcLink_tsk.c: pObj->fpDataStream[chId] != SYSTEM_LINK_STATUS_EFAIL : failed !!!
[IPU1-0] 38.754254 s: Assertion @ Line: 1364 in nullSrcLink_tsk.c: pObj->fpDataStream[chId] != SYSTEM_LINK_STATUS_EFAIL : failed !!!
[IPU1-1] 179.028762 s: Service Status: DHCPC : Enabled : Fault : 002
I followed the instructions from the visionSDK_UserGuide_TI_DeepLearning part 5. Did I make anything wrong here, or anything I missing?
Pls help me out!!