Part Number:AM5728
Tool/software: Linux
we Have connected an external IC to GPIOs of Sitara, we would like to flash the memory's IC thru this OpenOCD library and GPIO using SWD standard.
we Compile the lasted Version of OpenOCD (10.0.0.0), all looks fine except than Sitara is not reading back anything. but connecting a Scope to SWD lines, all looks fine, we can see than Sitara is sending the Command(Init and Read IC Informational), and the external IC is responding with the correct information (Requested IC Information), but Sitara never gets!
we already review the OpenOCD Code in different way, but looks all OK, Hardware looks fine too!
it is any special driver/software than we can use? or any recommendation?
Thank you!