AM1808 / Unused pin connections for USB0

Hello,

We are using AM1808 Rev 0.2 in our new design. USB1 port of the AM1808 is used in design but USB0 port is unused.

Here, datasheet does not specify anything what to do with unused pins of the USB0 port.  Datasheet has recommendations when both USB ports are unused or only USB1 port is unused.

Question:

Do we need to connect USB0 port power pins with supply or it should be left unconnected or any other recommendation is there from TI? Similarly, we need recommendations for below unused pins:

1. USB0_DRVBUS & USB0_VBUS

2. Data lines (DM / DP) & ID pin

PS : Currently, USB0 supply pins are left unconnected in design.

Regards,

Pavan Vora