Part Number:AM1808
Hi champs,
I have a question about NAND Flash Status Register [ECC_ERRNUM].
If these bits sets, this means that the number of bits that failed, right?
I saw TRM SPRUH82C 
P.914
0 : 1 error found.
1 : 2 errors found.
2 : 3 errors found.
3 : 4 errors found.
If original data is 0xF0. Then, data became 0xFF at error.
Do ECC_ERRNUM bits set 0x3h?
I confuse that...
I feel the following is correct.
0 : No error found.
1 : 1error found.
2 : 2errors found.
3 : 3errors found.
Please let me know.
And, could you send me sample S/W about [NAND Flash read/write with 4bit error control] if we have.
Regards,
Shinji Ueda