Part Number:OMAP-L138
Hello e2e memebers,
I am working on basic security device OMAP-L138 E. I am trying to boot it from a PC UART host using SECDEV Tools as instructed here (http://processors.wiki.ti.com/index.php/Basic_Secure_Boot_for_OMAP-L138_C6748)
1. First, I install SECDEVTOOL for OMAP-L138 from package downloaded from here (http://www.ti.com/tool/secdevtool-omapl138c6748
2. I use SecureHexAIS_OMAP-L138.exe to create secure AIS image from an application object file, say "uartEcho.out" file (built from TI examples). INI file is available in installed folder, I didn't write it.
SecureHexAIS_OMAP-L138.exe -ini applications\uartEcho_ini.ini -otype binary -o applications\uartEcho.bin applications\uartEcho.out
3. The generation process succeeds, I boot the secure OMAP-L138 with "uartEcho.bin" using GenericSecureUartHost.exe. I run into problem here, where the booting process is always stopping at the line " (AIS Parse): Waiting for DONE...".
This is the log from UART tool.
(File IO): Read 6248 bytes from file C:\ti\OMAPL138_C6748_Generic_Security\GNU\AISUtils\applications\uartEcho.bin.
(Serial Port): Opening COM7 at 115200 baud...
(AIS Parse): Read magic word 0x41504954.
(AIS Parse): Waiting for BOOTME... (power on or reset target now)
(AIS Parse): BOOTME received!
(AIS Parse): Performing Start-Word Sync...
(AIS Parse): Performing Ping Opcode Sync...
(AIS Parse): Processing command 0: 0x58535920.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Secure key loading, entering secure mode.
(AIS Parse): Processing command 1: 0x58535923.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Setting boot exit mode...
(AIS Parse): Set exit mode to 0x00000000.
(AIS Parse): Processing command 2: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 3: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 4: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 5: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 6: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 7: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 8: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 9: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 10: 0x5853590D.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Executing function...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): Processing command 11: 0x58535921.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading encoded section...
(AIS Parse): Loaded 156-Byte section to address 0xC1080000.
(AIS Parse): Processing command 12: 0x58535921.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading encoded section...
(AIS Parse): Loaded 5344-Byte section to address 0xC108009C.
(AIS Parse): Processing command 13: 0x58535921.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading encoded section...
(AIS Parse): Loaded 92-Byte section to address 0xC1081710.
(AIS Parse): Processing command 14: 0x58535921.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Loading encoded section...
(AIS Parse): Loaded 52-Byte section to address 0xC1081770.
(AIS Parse): Processing command 15: 0x58535906.
(AIS Parse): Performing Opcode Sync...
(AIS Parse): Performing jump and close...
(AIS Parse): Secure mode; sending signature.
(AIS Parse): AIS complete. Jump to address 0xC1080000.
(AIS Parse): Waiting for DONE...
Could anyone told me what is the reason and how can I tackle it?
Thank you.