OMAP-L138-EP UART BOOT Clock

Hi,

In my design, the clock input to OMAP-L138-EP is 50Mhz.  Will the OMAP-L138-EP UART BOOT work with 50Mhz clock input?  I don't see 50Mhz clock input as an option in SPRAB41E Application Report "Using the OMAP-L132/L138 Bootloader".  Table 7 shows various different multiplier and divider settings using BOOT[7:5] pins for different clock inputs.  What setting should be chosen on BOOT[7:5] if clock iput is 50Mhz.  I want to use the max OMAP-L138 UART baud rate (115kbps) if this is possible.  If not, I can work with other baud rates as well.

Regards,

Amit