Is it possible to use the OMAP L138 LCDK to implement an I2C or SPI connection with an external device?

I am excited to start implementing a project that involves using the OMAP L138 LCDK, but I need guidance about how to begin interfacing with the LCDK. I have been reading the wikis (MCDSK User Guide and L138 LCDK), but I have not yet succsefully compiled and ran code.

1. Do I need a hardware Emulator to accomplish this task?
   
   1. Will any of the suggested Emulators (XDS100, XDS200, XDS510, XDS560) suffice for this task?

2. Which interfaces on the LCDK can be used to send I2C and SPI?
   
   1. Where can I found a pinout for the Expansion socket on the LCDK?

3. If an Emulator is not required, how do I transfer, and execute CCS code on the LCDK?
   
   1. How can I load one of the sample DSP applications to the LCDK? The MCSDK OMAPL138 tutorial instructs to: << Create new Target "mcsdk.ccxml" with "Spectrum Digital XDS510USB Emulator" as Connection and "LCSDKOMAPL138" as Board or Device. >> within CCS.

4. Where can I find the Reference Manual for writing code for the OMAP L138 LCDK?

Thank you in advance for any guidance you can provide!