Hello,
I am trying to use AISgen_d800k008 to combine an ARM and a DSP .out file into a single AIS file to flash onto the NAND of an OMAP-L138 LCDK board.
I got the ARM .out file from the LED example project here: http://processors.wiki.ti.com/index.php/Boot_Images_for_OMAP-L138. I have confirmed that it can succesfully wake up the DSP as it is designed to do.
I made the DSP .out file with CCS v6. It successfully runs over the emulator in CCS and blinks an LED.
I am following the instructions here http://processors.wiki.ti.com/index.php/Boot_Images_for_OMAP-L138 to make the AIS file, but when I flash it onto the board and reset, nothing happens. The instructions say "the linker command file for the DSP application should specifically force the entry point to also be aligned to a 1KB boundary. For this example, a memory region named "entry_point" was created at address 0x80010000, and the section ".text:_c_int00" was assigned to that memory region." I can't figure out how to do that in CCS v6, so maybe that is what is wrong. If someone could point me to a resource that says how to do this, and has any other tips about making and running the combined AIS file, that would be great.
thanks.