Greetings,
I'm working on an OMAPL138 on a Critical Link evaluation board. We are eventually using a custom board with kernel version 3.2 so IPC 3 is not an option for us. I am having issues loading any program to the DSP core. I've attached the log result. I am not familiar with the details of the log, as far as I can tell I feel like it may be an issue with the Syslink build? The current program I am loading is the typical SYSBIOS example built into CCS6 for the C6000. I have made no changes other than the config.bld and updating module settings in app.cfg to support Syslink.
Attached files:
"arm_ipc.c" - the program I am running on the ARM core running a modified Angstrom Linux with v3.2 kernel
"screen.log" - log from the TRACE output when trying to load a program to the DSP core
"config.bld.cfg" - platform build (added .cfg to allow for upload via forum post)
"app.cfg" - ARM project configuration
I've appended the following to boot arguments for the system:
mem=32M@0xc0000000 mem=64M@0xc4000000
Environment/versions:
BIOS 6.34.02.18
IPC 1.25.00.04
Syslink 2.21.03.11
TI_CGT_C6000 7.4.1
XDC 3.24.05.48
Any help would be appreciated.
Thank you
Hitesh Patel
(Please visit the site to view this file)
(Please visit the site to view this file)
(Please visit the site to view this file)
(Please visit the site to view this file)