Hi,
I am using a secure enabled OMAP-L138.
I am using the content of the TI Security_collateral_update.zip with our own board.
I am using the SecureHexAIS_OMAP-L138.exe with the t3_dsp_L2.out and and the t3_dsp_DDR.out. The ini file is here attached (NFF_board.ini).
While I am able to boot the dsp_sectononsec.bin generated from the t3_dsp_L2.out, the binary generated from the t3_dsp_DDR.out hangs forever ((AIS Parse): Waiting for DONE...). Logs attached. Note that I am booting from UART through the GenericSecureUartHost.exe application.
It seems we are not able to configure the mDDR @150MHz on the board with the secure enabled part on.
That's odd considering that the same configuration settings work fine on a board with a normal (non secure) OMAP-L138.
The MPU2 (for DDR2/mDDR SDRAM) seems to open up everything (by looking at the ini file).
Is there anything I am missing?
(Please visit the site to view this file)
(Please visit the site to view this file)(Please visit the site to view this file)
Regards,
Giuseppe