Dear e2e!
My question is about pin assignments of the TMS320C6747 DSP ZKB (BGA) package for the next ports:
1) UART0_RXD/I2C0_SDA/TM64P0_IN12/GP5[8]/BOOT[8];
2) UART0_TXD/I2C0_SCL/TM64P0_OUT12/GP5[9]/BOOT[9];
3) EMB_D[14]/GP6[14];
4) ACLKX0/ECAP0/APWM0/GP2[12].
The figure 2-3 of the TMS320C6747 DSP datasheet (SPRS377F –SEPTEMBER 2008–REVISED JUNE 2014) gives next pin assignment:
1) UART0_RXD/I2C0_SDA/TM64P0_IN12/GP5[8]/BOOT[8] -> R3 ;
2) UART0_TXD/I2C0_SCL/TM64P0_OUT12/GP5[9]/BOOT[9] -> P3;
3) EMB_D[14]/GP6[14] -> E16;
4) ACLKX0/ECAP0/APWM0/GP2[12] -> C5.
The table 2-5 of the same document gives the another variant of pin assignment:
1) UART0_RXD/I2C0_SDA/TM64P0_IN12/GP5[8]/BOOT[8] -> P3;
2) UART0_TXD/I2C0_SCL/TM64P0_OUT12/GP5[9]/BOOT[9] -> R3 ;
3) EMB_D[14]/GP6[14] -> E`6;
4) ACLKX0/ECAP0/APWM0/GP2[12] -> CD.
Please help, where is the truth?
With many thanks in advance,
Vitalii
PS: I hope, SPRS377F is the latest revision of TMS320C6747 DSP datasheet.
I have just downloaded it from ti.com