booting flash after reset omapl137

Hi 

I have a new system with omapl137. I need booting from nandflash when power on my board. i attached the shematic.

with this shematic can omapl137 booting from nandflash when power on my board ?

I used 14 pin TI jtag. I think that jtag reset ( TRST pin) must be connected to the (TRST pin) of omapl137.

Do I must connect the jtag reset (TRST pin) to (SN74LVC1G08DBVR)  or  (OMAPL137) or both? 

Regards,

Mahdi