Hi
I have a new system with omapl137. i used ambe3000 and tlv320aic29 in my board . tlv320aic29 connected to ambe3000 with spi and ambe3000 connect to omapl137 with mcasp. I need a simple reset circuit. i attached the shematic of my reset circuit.
is the shematic ok? Please help me to do a simple reset circuit.
i set the boot mode to nand flash. i want that when turn on the board omapl137 boot from nand flash. when turn on the board omapl137 don't boot from nand flash but when reset the board it boot from nandflash correctly.
Please help me to fix this problem.