Part Number:AM3352
Tool/software: Linux
Hi, TI expert
SDK04.02.00.09 runs on a custom board similar with am335x-gpevm. Everything is fine when U-boot start up from NAND device. And also I can get MMC info from U-boot, it is OK. But when I create sd card image using create-sdcard.sh and try to start u-boot from sd card, it hangs on. The u-boot log is "Trying to boot from MMC1 ", then it stops. I am sure MLO and u-boot.img are on part 1 of SD card.
What might be the reason? The image for NAND boot can work for MMC boot?
Best Regards
Yang